I.S. EN 14199:2015
Current
The latest, up-to-date edition.
EXECUTION OF SPECIAL GEOTECHNICAL WORKS - MICROPILES
Hardcopy , PDF
English
01-01-2015
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information needed for the execution of the works
5 Geotechnical investigation
6 Materials and products
7 Considerations related to design
8 Execution
9 Supervision, monitoring and testing
10 Records
11 Special requirements
Annex A (informative) - Execution methods of micropiles
Annex B (informative) - Guidance on minimum cover
(in mm) for bearing element of low strength steel
for cast in situ micropiles
Annex C (informative) - Borehole testing and pregrouting
Annex D (informative) - Guideline for a record for micropiles
Annex E (informative) - Degree of obligation of the provisions
Bibliography
Presents general principles for the execution of micropiles.
DocumentType |
Standard
|
Pages |
66
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Supersedes |
Standards | Relationship |
SN EN 14199 : 2015 | Identical |
NF EN 14199 : 2015 | Identical |
NS EN 14199 : 2005 | Identical |
NBN EN 14199 : 2015 | Identical |
EN 14199:2015 | Identical |
NEN EN 14199 : 2015 | Identical |
DIN EN 14199:2015-07 | Identical |
BS EN 14199:2015 | Identical |
UNI EN 14199 : 2005 | Identical |
UNE-EN 14199:2006 | Identical |
EN ISO 9692-1:2013 | Welding and allied processes - Types of joint preparation - Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013) |
ISO 14341:2010 | Welding consumables Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels Classification |
EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
EN 12716:2001 | Execution of special geotechnical works - Jet grouting |
EN ISO 11960:2014 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014) |
ISO 17660-1:2006 | Welding — Welding of reinforcing steel — Part 1: Load-bearing welded joints |
EN 1536:2010+A1:2015 | Execution of special geotechnical work - Bored piles |
ISO 2560:2009 | Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification |
ISO 18276:2017 | Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification |
EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
EN ISO 18276:2017 | Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017) |
EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
EN 445:2007 | Grout for prestressing tendons - Test methods |
ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
ISO 9692-1:2013 | Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels |
EN ISO 17660-1:2006 | Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006) |
ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
EN ISO 14341:2011 | Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010) |
EN 12620:2002+A1:2008 | Aggregates for concrete |
ISO 15630-3:2010 | Steel for the reinforcement and prestressing of concrete Test methods Part 3: Prestressing steel |
EN ISO 2560:2009 | Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009) |
ISO 17632:2015 | Welding consumables Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels Classification |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN ISO 17632:2015 | Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015) |
EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
EN 447:2007 | Grout for prestressing tendons - Basic requirements |
ISO 9692-2:1998 | Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels |
PREN 10138-4 : DRAFT 2000 | PRESTRESSING STEELS - PART 4: BARS |
ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
EN 1537:2013 | Execution of special geotechnical works - Ground anchors |
EN ISO 15630-3:2010 | Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010) |
EN 12699:2015 | Execution of special geotechnical works - Displacement piles |
EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
EN 934-2:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.