I.S. EN 14733:2005
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2005
Publisher
Superseded date
20-05-2013
Superseded by
€37.00
Excluding VAT
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Control procedures
6 Inspection and testing
7 Non-conformity
8 Inspection, measuring and test equipment
9 Records
10 Operative competence
Bibliography
Defines Factory Production Control (FPC) requirements for use by the manufacturers of bituminous emulsions, cut-back and fluxed binders.
| DevelopmentNote |
2005 Edition Re-issued in October 2010 & incorporates AMD 1 2010. (10/2010)
|
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 14733:2005+A1:2010 | Identical |
| EN 14733:2005 | Equivalent |
| NBN EN 14733 : 2005 + A1 2010 | Identical |
| BS EN 14733 : 2005 | Equivalent |
| BS EN 14733 : 2005 | Identical |
| NF EN 14733 : 2005 + A1 2010 | Identical |
| NS EN 14733 : 2005 + A1 2010 | Identical |
| NEN EN 14733 : 2005 + A1 2010 | Identical |
| DIN EN 14733:2005-08 | Equivalent |
| DIN EN 14733:2010-12 | Identical |
| UNE-EN 14733:2006 | Identical |
| EN 13075-1:2016 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method |
| EN 12592:2014 | Bitumen and bituminous binders - Determination of solubility |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| EN 14769:2012 | Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV) |
| EN 13589:2008 | Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method |
| EN 15626:2016 | Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method |
| EN 13587:2016 | Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method |
| EN 1425:2012 | Bitumen and bituminous binders - Characterization of perceptible properties |
| PREN 13074-1 : DRAFT 2017 | BS EN 13074-1 - BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 1: RECOVERY BY EVAPORATION |
| EN 1429:2013 | Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method |
| PREN 13074-2 : DRAFT 2017 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 2: STABILISATION AFTER RECOVERY BY EVAPORATION |
| EN 12596:2014 | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| EN 13808:2013 | Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions |
| EN 13703:2003 | Bitumen and bituminous binders - Determination of deformation energy |
| EN 1428:2012 | Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method |
| EN 13358:2010 | Bitumen and bituminous binders - Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes |
| EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
| PREN 12846-1 : DRAFT 2008 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME BY THE EFFLUX VISCOMETER - PART 1: BITUMINOUS EMULSIONS |
| EN ISO 3405:2011 | Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011) |
| EN 13588:2017 | Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test |
| EN 12847:2009 | Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 15322:2013 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 12850:2009 | Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions |
| EN 13075-2:2016 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| PREN 12846-2 : DRAFT 2008 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME BY THE EFFLUX VISCOMETER - PART 2: CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| ISO 3405:2011 | Petroleum products — Determination of distillation characteristics at atmospheric pressure |
| EN ISO 2592:2017 | Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
| EN ISO 13736:2013 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| ISO 13736:2013 | Determination of flash point — Abel closed-cup method |
| EN 12848:2009 | Bitumen and bituminous binders - Determination of mixing stability with cement of bituminous emulsions |
| EN 13614:2011 | Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test |
| EN 12595:2014 | Bitumen and bituminous binders - Determination of kinematic viscosity |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.