I.S. EN 14743:2005
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - SOFTENERS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
Hardcopy , PDF
11-07-2007
English
07-12-2005
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 Softener specification
4.2 Quality of materials and chemicals
4.2.1 Cation exchange resin
4.2.2 Regenerating salt
4.3 Design and manufacturing specifications
4.3.1 Resistance to hydrostatic pressure
4.3.2 Resistance to cyclic pressure
4.3.3 Minimum and maximum operating pressure
4.3.4 Resistance to temperature
4.3.5 Electrical safety
4.3.6 Salt tank
4.3.7 Continuity of supply during regeneration
4.3.8 Protection against backflow and infiltration of brine
4.3.9 Noise level
4.3.10 Air vent
4.3.11 End connections
4.3.12 Drain connections
4.4 Operating specifications
4.4.1 Initiation of regeneration
4.4.2 Brining efficiency
4.4.3 Regeneration water
4.4.4 Quality of treated water after regeneration
4.4.5 Continuous flow rate
4.4.6 Pressure drop
4.4.7 Exchange capacity
4.5 Installation specifications
4.5.1 Connection to mains water supply and existing pipe network
4.5.2 Drain
4.5.3 Electrical connection
5 Labelling
5.1 Identification of equipment
5.2 Safety labelling
6 Technical documentation
7 Test methods
7.1 Test conditions
7.1.1 Ambiant air
7.1.2 Water and salt
7.1.3 Test rig
7.1.4 Analysis
7.2 Cation exchange resin
7.3 Technical documentation
7.4 Manufacturing tests
7.4.1 Resistance to hydrostatic pressure
7.4.2 Resistance to cyclic pressure
7.4.3 Continuity of water supply
7.4.4 Protection against backflow
7.4.5 Air displacement
7.5 Operating characteristics
7.5.1 General
7.5.2 Nominal flow rate
7.5.3 Regenerations
7.5.4 Exchange capacity
7.5.5 Brine efficiency
7.5.6 Regeneration water
7.5.7 Quality of treated water after a regeneration
Annex A (normative) !Installation, operation and maintenance
Bibliography
Describes requirements relating to the construction and mode of operation and relevant methods of testing of automatic, salt-regenerated, cation exchange softeners for drinking water installations inside buildings which are permanently connected to the mains supply.
| DevelopmentNote |
2005 Edition Re-Issued in July 2007 & incorporates AMD 1 2007. (07/2007)
|
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Standards | Relationship |
| NS EN 14743 : 2005 + A1 2007 | Identical |
| EN 14743:2005+A1:2007 | Identical |
| SN EN 14743 : 2005 + A1 2007 | Identical |
| BS EN 14743 : 2005 | Identical |
| NBN EN 14743 : 2006 + A1 2007 | Identical |
| DIN EN 14743:2007-09 | Identical |
| NF EN 14743 : 2006 + A1 2007 | Identical |
| UNI EN 14743 : 2007 | Identical |
| UNE-EN 14743:2006 | Identical |
| NEN EN 14743 : 2005 + A1 2007 | Identical |
| ISO 3822-1:1999 | Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 1: Method of measurement |
| EN 973:2009 | Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers |
| EN ISO 11885:2009 | Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007) |
| EN 15161:2006 | Water conditioning equipment inside buildings - Installation, operation, maintenance and repair |
| EN 1717:2000 | Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow |
| ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
| ISO 10304-1:2007 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN ISO 10304-1:2009 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.