I.S. EN 15232:2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT
Hardcopy , PDF
English
01-01-2012
11-06-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations and acronyms
5 Impact of BACS and TBM on the energy performance
of buildings
6 Factor based calculation procedure of the BACS
impact on the energy performance of buildings
(BACS factor method)
Annex A (normative) - Detailed calculation procedure
of the BACS impact on the energy performance
of buildings (Detailed method)
Annex B (informative) - Determination of the BACS
efficiency factors
Annex C (informative) - Examples of how to use the
BACS function list of EN ISO 16484-3 to
describe functions from this European Standard
Annex D (informative) - The impact of innovative
integrated BACS functions (examples)
Annex E (informative) - Applying BACS for EMS specified
in EN 16001
Annex F (informative) - Maintain BACS energy efficiency
Annex G (informative) - Control accuracy
Bibliography
Describes: - a structured list of Building Automation and Control System (BACS) and Technical Building Management (TBM) functions which have an impact on the energy performance of buildings; - a method to define minimum requirements regarding BACS and TBM functions to be implemented in buildings of different complexities; - a factor based method to get a first estimation of the impact of these functions on typical buildings; - detailed methods to assess the impact of these functions on a given building. These methods enable to introduce the impact of these functions in the calculations of energy performance ratings and indicators calculated by the relevant standards.
| DocumentType |
Standard
|
| Pages |
115
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN 15232:2012-04 | Identical |
| BS EN 15232:2012 | Identical |
| NBN EN 15232 : 2012 | Identical |
| NS EN 15232 : 2012 | Identical |
| NEN EN 15232 : 2012 | Identical |
| NF EN 15232 : 2012 | Identical |
| EN 15232:2012 | Identical |
| DIN EN 15232:2012-09 | Equivalent |
| CEN/TS 15379:2006 | Building management - Terminology and scope of services |
| EN 15603:2008 | Energy performance of buildings - Overall energy use and definition of energy ratings |
| EN 15316-3-3:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-3: Domestic hot water systems, generation |
| EN 15378:2007 | Heating systems in buildings - Inspection of boilers and heating systems |
| ISO 16484-5:2017 | Building automation and control systems (BACS) — Part 5: Data communication protocol |
| DIN V 18599-4:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 4: NET AND FINAL ENERGY DEMAND FOR LIGHTING |
| EN 12098-5:2017 | Energy Performance of Buildings - Controls for heating systems - Part 5: Start-stop schedulers for heating systems - Modules M3-5,6,7,8 |
| EN 215 : 2004 AMD 1 2006 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| ISO 9488:1999 | Solar energy — Vocabulary |
| EN 16001:2009 | Energy management systems - Requirements with guidance for use |
| IEC 61131-3:2013 | Programmable controllers - Part 3: Programming languages |
| EN 15240:2007 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of air-conditioning systems |
| ISO 16484-2:2004 | Building automation and control systems (BACS) — Part 2: Hardware |
| EN 15316-4-4:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-4: Heat generation systems, building-integrated cogeneration systems, Module M8-3-4, M8-8-4, M8-11-4 |
| EN 15316-4-6:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-6: Heat generation systems, photovoltaic systems |
| CEN/CLC/TR 16103:2010 | Energy management and energy efficiency - Glossary of terms |
| EN 15316-1:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4 |
| ISO 16484-1:2010 | Building automation and control systems (BACS) — Part 1: Project specification and implementation |
| EN 832:1998/AC:2002 | THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF ENERGY USE FOR HEATING - RESIDENTIAL BUILDINGS |
| EN 61131-3:2013 | Programmable controllers - Part 3: Programming languages |
| EN ISO 13790:2008 | Energy performance of buildings - Calculation of energy use for space heating and cooling (ISO 13790:2008) |
| EN 15316-4-7:2008 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-7: Space heating generation systems, biomass combustion systems |
| EN 15316-4-3:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-3: Heat generation systems, thermal solar and photovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3 |
| EN ISO 16484-5:2017 | Building automation and control systems (BACS) - Part 5: Data communication protocol (ISO 16484-5:2017) |
| EN ISO 16484-1:2010 | Building automation and control systems (BACS) - Part 1: Project specification and implementation (ISO 16484-1:2010) |
| ISO 16484-3:2005 | Building automation and control systems (BACS) — Part 3: Functions |
| EN 15316-2-1:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-1: Space heating emission systems |
| EN ISO 9488:1999 | Solar energy - Vocabulary (ISO 9488:1999) |
| EN 12098-4:2005 | Controls for heating systems - Part 4: Optimum start-stop control equipment for electrical systems |
| VDI 2078:2015-06 | Calculation of thermal loads and room temperatures (design cooling load and annual simulation) |
| CEN/TR 15615:2008 | Explanation of the general relationship between various European standards and the Energy Performance of Buildings Directive (EPBD) - Umbrella Document |
| EN ISO 16484-3:2005 | Building automation and control systems (BACS) - Part 3: Functions (ISO 16484-3:2005) |
| EN 15316-3-2:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-2: Domestic hot water systems, distribution |
| EN 15239:2007 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems |
| EN 12098-3:2017 | Energy Performance of Buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5,6,7,8 |
| EN 15243:2007 | Ventilation for buildings - Calculation of room temperatures and of load and energy for buildings with room conditioning systems |
| EN 15255:2007 | Energy performance of buildings - Sensible room cooling load calculation - General criteria and validation procedures |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| ISO 13790:2008 | Energy performance of buildings — Calculation of energy use for space heating and cooling |
| IEC 60675:1994+AMD1:1998 CSV | Household electric direct-acting room heaters - Methods for measuring performance |
| EN 15242:2007 | Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration |
| EN 15316-4-1:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating and DHW generation systems, combustion systems (boilers, biomass), Module M3-8-1, M8-8-1 |
| EN 12098-2:2001 | Controls for heating systems - Part 2: Optimum start-stop control equipment for hot water heating systems |
| EN 60675:1995/A1:1998 | HOUSEHOLD ELECTRIC DIRECT-ACTING ROOM HEATERS - METHODS FOR MEASURING PERFORMANCE |
| EN 15217:2007 | Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings |
| EN 15500:2008 | Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment |
| EN ISO 16484-2:2004 | Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004) |
| EN 12098-1:2017 | Energy Performance of Buildings - Controls for heating systems - Part 1: Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8 |
| EN 15316-4-5:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5 |
| EN 15316-2-3:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-3: Space heating distribution systems |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.