I.S. EN 15251:2007
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS
Hardcopy , PDF
30-11-2019
English
01-01-2007
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Interactions with other standards
6 Design input criteria for dimensioning of
buildings, heating, cooling, mechanical
and natural ventilation systems
6.1 General
6.2 Thermal environment
6.3 Indoor air quality and ventilation rates
6.4 Humidity
6.5 Lighting
6.6 Noise
7 Indoor environment parameters for energy calculation
7.1 General
7.2 Thermal environment
7.3 Indoor air quality and ventilation
7.4 Humidity
7.5 Lighting
8 Evaluation of the indoor environment and long
term indicators
8.1 General
8.2 Design indicators
8.3 Calculated indicators of indoor environment
8.4 Measured indicators
8.5 Subjective evaluations
9 Inspections and measurement of the indoor environment
in existing buildings
9.1 General
9.2 Measurements
10 Classification and certification of the indoor
environment
10.1 General
10.2 Detailed classification and certification
10.3 Recommended overall evaluation of the indoor
environment and certification
Annex A (informative) Recommended criteria for the thermal
environment
A.1 Recommended categories for design of mechanical
heated and cooled buildings
A.2 Acceptable indoor temperatures for design of buildings
without mechanical cooling systems
A.3 Recommended indoor temperatures for energy calculations
Annex B (informative) Basis for the criteria for indoor air
quality and ventilation rates
B.1 Recommended design ventilation rates in non-residential
buildings
B.1.1 General
B.1.2 Method based on person and building component
B.1.3 Method based on ventilation rate per person or
per m[2] floor area
B.1.4 Recommended values of CO[2] for energy calculation
B.2 Recommended design ventilation rates in residential
buildings
B.3 Recommended criteria for dimensioning of humidification
and de-humidification
B.4 Recommended ventilation during un-occupied hours
Annex C (informative) Example on how to define low and very
low polluting buildings
Annex D (informative) Recommended criteria for lighting
Annex E (informative) Indoor system noise criteria of some
spaces and buildings
Annex F (informative) Long term evaluation of the general
thermal comfort conditions
Annex G (informative) Recommended criteria for acceptable
deviations
G.1 Building Category
G.2 Length of deviation
Annex H (informative) Methodologies for subjective evaluations
Annex I (informative) Examples of classification and
certification of the indoor Environment
I.1 The design criteria used
I.2 Whole year computer simulations of the indoor environment
and energy performance
I.3 Long term measurement of selected parameters for
the indoor environment
I.4 Subjective responses from occupants
Bibliography
Describes indoor environmental parameters which have an impact on the energy performance of buildings.
| DocumentType |
Standard
|
| Pages |
54
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| EN 15251:2007 | Identical |
| EN ISO 13792:2012 | Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods (ISO 13792:2012) |
| EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
| EN ISO 15927-4:2005 | Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual energy use for heating and cooling (ISO 15927-4:2005) |
| ISO 13792:2012 | Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling Simplified methods |
| EN 15240:2007 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of air-conditioning systems |
| ISO 15927-4:2005 | Hygrothermal performance of buildings — Calculation and presentation of climatic data — Part 4: Hourly data for assessing the annual energy use for heating and cooling |
| EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
| ISO 15927-5:2004 | Hygrothermal performance of buildings Calculation and presentation of climatic data Part 5: Data for design heat load for space heating |
| EN 12599:2012 | Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| ISO 7726:1998 | Ergonomics of the thermal environment Instruments for measuring physical quantities |
| EN ISO 13790:2008 | Energy performance of buildings - Calculation of energy use for space heating and cooling (ISO 13790:2008) |
| EN ISO 13731:2001 | Ergonomics of the thermal environment - Vocabulary and symbols (ISO 13731:2001) |
| EN ISO 7726:2001 | Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998) |
| EN ISO 8996:2004 | Ergonomics of the thermal environment - Determination of metabolic rate (ISO 8996:2004) |
| DIN 5032 : LATEST | |
| CR 1752:1998 | Ventilation for buildings - Design criteria for the indoor environment |
| EN ISO 7730:2005 | Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005) |
| EN ISO 13791:2012 | Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures (ISO 13791:2012) |
| EN 12193:2007 | Light and lighting - Sports lighting |
| ISO 8996:2004 | Ergonomics of the thermal environment Determination of metabolic rate |
| ISO/TS 14415:2005 | Ergonomics of the thermal environment Application of International Standards to people with special requirements |
| EN 13032-1:2004+A1:2012 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format |
| ISO 7730:2005 | Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
| CEN/TR 14788:2006 | Ventilation for buildings - Design and dimensioning of residential ventilation systems |
| ISO 13791:2012 | Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling General criteria and validation procedures |
| EN 15239:2007 | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems |
| EN ISO 9920:2009 | Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble (ISO 9920:2007, Corrected version 2008-11-01) |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| ISO 13790:2008 | Energy performance of buildings Calculation of energy use for space heating and cooling |
| EN 15242:2007 | Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration |
| ISO 9920:2007 | Ergonomics of the thermal environment Estimation of thermal insulation and water vapour resistance of a clothing ensemble |
| ISO 13731:2001 | Ergonomics of the thermal environment Vocabulary and symbols |
| EN 12831:2003 | Heating systems in buildings - Method for calculation of the design heat load |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.