I.S. EN 15313:2016
Current
The latest, up-to-date edition.
RAILWAY APPLICATIONS - IN-SERVICE WHEELSET OPERATION REQUIREMENTS IN-SERVICE AND OFF-VEHICLE WHEELSET MAINTENANCE
Hardcopy , PDF
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Maintenance
5 Definition and illustrations of a boxed wheelset, its
associated components and defects
6 Requirements and operations
7 In-service boxed wheelset maintenance
8 Off-vehicle wheelset maintenance
9 Action to be taken on any wheelset after an incident in
service or when not covered by the maintenance plan
10 Equipment not subject to Directive 2008/57/EC
11 Summary table of requirements of this standard
Annex A (normative) - Minimum database content for
freight wagon wheelset traceability
Annex B (informative) - Database content for the tractability
of wheelsets of vehicles in the scope of TSI 'Rolling
stock - Locomotive and passenger rated vehicles'
(TSI Loc & Pas)
Annex C (normative) - Definition and illustration of defects
Annex D (normative) - Freight stock
Annex E (informative) - Rim size without roll-over for equipment
not subject to Directive 2008/57/EC
Annex F (normative) - Definitions of Type A and B axles
Annex G (informative) - Permissible circularity defects
Annex H (informative) - Tyred wheels and resilient wheels
Annex I (normative) - Reference images for axle surface
condition limits for off vehicle wheelset maintenance
Annex J (informative) - NDT interval
Annex K (informative) - Summary of the requirements of
this standard for in-service boxed wheelsets
Annex L (informative) - Characteristics of narrow gauge wheelsets
Annex M (informative) - Characteristics of Spanish and Portuguese
gauge wheelsets
Annex N (informative) - Characteristics of Finnish and Baltic
Country Gauge Wheelsets
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of
EU Directive 2008/57/EC aimed to be covered
Bibliography
Provides: - the limits for in-service and off-vehicle wheelsets; - the operations to be carried out for which the specific values (and/or criteria) remain to be defined in the maintenance plan.
DocumentType |
Standard
|
Pages |
120
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Supersedes |
Standards | Relationship |
EN 15313:2016 | Identical |
UIC 812-4 : 1ED 1990 | TECHNICAL SPECIFICATION FOR THE SUPPLY OF TYRED WHEELS FOR TRACTIVE AND TRAILING STOCK - TYPE FITTING AND TOLERANCES |
EN 13715:2006+A1:2010 | Railway applications - Wheelsets and bogies - Wheels - Tread profile |
UIC 812-1 : 4ED 1989 | TECHNICAL SPECIFICATION FOR THE SUPPLY OF ROLLED OR FORGED WHEEL CENTRES FOR TYRED WHEELS FOR TRAILING STOCK - QUALITY REQUIREMENTS |
UIC 510-2 : 4ED 2004 | TRAILING STOCK: WHEELS AND WHEELSETS - CONDITIONS CONCERNING THE USE OF WHEELS OF VARIOUS DIAMETERS |
EN ISO 9934-3:2015 | Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 9934-3:2015) |
EN 12080:2017 | Railway applications - Axleboxes - Rolling bearings |
EN 12081:2017 | Railway applications - Axleboxes - Lubricating greases |
UIC 812-5 : 1ED 1988 | TECHNICAL SPECIFICATION FOR THE SUPPLY OF ROLLED OR FORGED STEEL WHEEL CENTRES FOR TRACTIVE AND TRAILING STOCK - TOLERANCES AND SURFACE ROUGHNESS |
EN 12082:2017 | Railway applications - Axleboxes - Performance testing |
EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
EN ISO 9934-1:2016 | Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016) |
EN 13104:2009+A2:2012 | Railway applications - Wheelsets and bogies - Powered axles - Design method |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN 13261:2009+A1:2010 | Railway applications - Wheelsets and bogies - Axles - Product requirements |
ISO 9934-1:2016 | Non-destructive testing — Magnetic particle testing — Part 1: General principles |
UIC 810-1 : 5ED 2003 | TECHNICAL SPECIFICATION FOR THE SUPPLY OF ROUGH ROLLED NON-ALLOY STEEL TYRES FOR TRACTIVE AND TRAILING STOCK |
EN 13262:2004+A2:2011 | Railway applications - Wheelsets and bogies - Wheels - Product requirements |
ISO 9934-2:2015 | Non-destructive testing — Magnetic particle testing — Part 2: Detection media |
UIC 810-2 : 4ED 1985 | TECHNICAL SPECIFICATION FOR THE SUPPLY OF ROUGH TYRES FOR TRACTIVE AND TRAILING STOCK - TOLERANCES |
ISO 9934-3:2015 | Non-destructive testing — Magnetic particle testing — Part 3: Equipment |
EN 13260:2009+A1:2010 | Railway applications - Wheelsets and bogies - Wheelsets - Product requirements |
UIC 813 : 2ED 2003 | TECHNICAL SPECIFICATION FOR THE SUPPLY OF WHEELSETS FOR TRACTIVE AND TRAILING STOCK - TOLERANCES AND ASSEMBLY |
EN ISO 9934-2:2015 | Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2015) |
EN 15085-2:2007 | Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer |
EN 13103:2009+A2:2012 | Railway applications - Wheelsets and bogies - Non powered axles - Design method |
UIC 510-1 : 1978 AMD 14 | WAGONS - RUNNING GEAR - NORMALISATION |
EN 15427:2008+A1:2010 | Railway applications - Wheel/rail friction management - Flange lubrication |
BS 5892-5(1987) : 1987 | RAILWAY ROLLING STOCK MATERIAL (METRIC) - PART 5: SPECIFICATION FOR STEEL BARS FOR RETAINING RINGS FOR TYRED WHEELS |
EN 13979-1:2003+A2:2011 | Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels |
UIC 810-3 : 1ED 1990 | TECHNICAL SPECIFICATION FOR THE SUPPLY OF NON-ALLOY FLAT AND SECTIONAL STEEL FOR TYRE RETENTION SPRING RINGS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.