Skip to content
Please enter a keyword to search
  • Preview

    I.S. EN 15381:2008

    Current The latest, up-to-date edition.

    GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2008

    Publisher:  National Standards Authority of Ireland

    For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
    Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

    Dates of withdrawal of national standards are available from NSAI.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms, definitions and abbreviations
      3.1 Terms and definitions
      3.2 Abbreviations
    4 Required characteristics and corresponding test methods
      4.1 General
      4.2 Characteristics relevant to specific conditions of use
          4.2.1 General
          4.2.2 Alkaline resistance
          4.2.3 Melting point
          4.2.4 Resistance to weathering
    5 Evaluation of conformity
      5.1 General
      5.2 Verification of values
      5.3 Initial type tests
      5.4 Factory production control
      5.5 Inspection
    6 Marking
    Annex A (normative) - Factory production control
          A.1 Items to be addressed in a factory
              production control system
              A.1.1 General
              A.1.2 Product design
              A.1.3 Production
              A.1.4 Finished products
              A.1.5 Applicable to A.1.2, A1.3 and A.1.4
                    (to be used where appropriate)
          A.2 Checklist for the assessment of a factory
              production control system
              A.2.1 General
              A.2.2 Checklist
    Annex B (normative) - Durability aspects
          B.1 Weathering
          B.2 Alkaline resistance
          B.3 Corrosion resistance
    Annex C (normative) - Test method for the determination of the
                          bitumen retention in paving fabrics
                          used in pavements and asphalt overlays
          C.0 Introduction
          C.1 Scope
          C.2 Test specimens
              C.2.1 Handling
              C.2.2 Selection
              C.2.3 Number and dimensions
              C.2.4 Condition of specimens
          C.3 Testing procedure
          C.4 Test report
    Annex D (normative) - Tensile test on steel wire mesh
    Annex ZA (informative) - Clauses of this European Standard
                             addressing the provisions of the EU
                             Construction Products Directive
          ZA.1 Scope and relevant characteristics
          ZA.2 Procedure for the attestation of conformity
               of geotextiles and geotextile-related products
               used in pavements and asphalt overlays
               ZA.2.1 Systems of attestation of conformity
               ZA.2.2 Certificate and declaration of conformity
          ZA.3 CE-marking and labelling
    Bibliography

    Abstract - (Show below) - (Hide below)

    Describes the relevant characteristics of metallic and non-metallic geotextiles and geotextile-related products used in the construction of pavements and asphalt overlays and the appropriate test methods to determine these characteristics.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher National Standards Authority of Ireland
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    EN ISO 13433:2006 Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433:2006)
    EN 1426:2015 Bitumen and bituminous binders - Determination of needle penetration
    ISO 13934-1:2013 Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
    EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
    EN 12226:2012 Geosynthetics - General tests for evaluation following durability testing
    EN ISO 10319:2015 Geosynthetics - Wide-width tensile test (ISO 10319:2015)
    EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013)
    CR ISO 13434:1998 GUIDELINES ON DURABILITY OF GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS
    ISO 10320:1999 Geotextiles and geotextile-related products Identification on site
    EN ISO 1043-1:2011/A1:2016 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016)
    ISO 12236:2006 Geosynthetics — Static puncture test (CBR test)
    EN 14030:2001/A1:2003 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO ACID AND ALKALINE LIQUIDS
    EN 10244-2:2009 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings
    ISO 10319:2015 Geosynthetics — Wide-width tensile test
    EN ISO 3146:2000/AC:2003 PLASTICS - DETERMINATION OF MELTING BEHAVIOUR (MELTING TEMPERATURE OR MELTING RANGE) OF SEMI-CRYSTALLINE POLYMERS BY CAPILLARY TUBE AND POLARIZING-MICROSCOPE METHODS
    EN 12224 : 2000 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE RESISTANCE TO WEATHERING
    EN ISO 10318 : 2005 GEOSYNTHETICS - TERMS AND DEFINITIONS
    EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
    ISO 9862:2005 Geosynthetics — Sampling and preparation of test specimens
    EN ISO 10320:1999 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - IDENTIFICATION ON SITE
    ISO 13433:2006 Geosynthetics — Dynamic perforation test (cone drop test)
    EN 10223-3:2013 Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
    EN ISO 15630-2:2010 Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2010)
    EN ISO 13431:1999 Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999)
    EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
    ISO/TR 12960:1998 Geotextiles and geotextile-related products Screening test method for determining the resistance to liquids
    ISO 3146:2000 Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
    EN ISO 9864:2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005)
    ISO 9001:2015 Quality management systems — Requirements
    ISO 10318:2005 Geosynthetics Terms and definitions
    AASHTO M 288 : 2015 SPECIFICATION FOR GEOSYNTHETIC SPECIFICATION FOR HIGHWAY APPLICATIONS
    EN 12591:2009 Bitumen and bituminous binders - Specifications for paving grade bitumens
    EN ISO 12236:2006 Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006)
    ISO 13431:1999 Geotextiles and geotextile-related products — Determination of tensile creep and creep rupture behaviour
    ISO 1043-1:2011 Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
    ISO 15630-2:2010 Steel for the reinforcement and prestressing of concrete Test methods Part 2: Welded fabric
    ISO 9864:2005 Geosynthetics — Test method for the determination of mass per unit area of geotextiles and geotextile-related products
    EN ISO 9862:2005 Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective