I.S. EN 15431:2008
Current
The latest, up-to-date edition.
WINTER AND ROAD SERVICE AREA MAINTENANCE EQUIPMENTS - POWER SYSTEM AND RELATED CONTROLS - INTERCHANGEABILITY AND PERFORMANCE REQUIREMENTS
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Power System and related controls
3.1 Hydraulic system for municipal vehicles - Specifications
3.1.1 Drive of the oil pump
3.1.2 Hydraulic Circuits
3.1.3 Connection between the hydraulic
system of the vehicle and the implements
3.1.4 Flow Rates
3.1.5 Pressure
3.1.6 Power
3.1.7 Capacity of the oil tank
3.1.8 Maximum oil temperature, cooling
capacity test procedure
3.1.9 Line cross sections
3.1.10 Couplings and functions
3.1.11 Hydraulic Fluid
3.2 Mechanical Front-Mounted Power Take
Off PTO, shaft profile and Performance
3.2.1 General
3.2.2 Profile A: n = 540 min[-1] P[max] = 60 kW
3.2.3 Profile B: n = 540 min[-1] or n = 1000
min[-1] P[max] = 150 kW
3.2.4 Power take-off shaft profile
3.3 Electrical Connectors
3.3.1 Connector 24 V, 7 pins, at the
front of the vehicle, socket design
according to ISO 1185
3.3.2 Connector 12 V, 7 pins, at the front
of the vehicle, socket design based on
ISO 1724
3.3.3 Electrical Connectors in the cabin,
24 V, 3 pin
3.3.4 Electrical Connectors in the cabin,
12 V, 3 pin
Bibliography
Outlines power systems equipped for the operation and able to drive implements and attachments such as snow ploughs and/or spreaders on winter service vehicles or mowers on road service area maintenance vehicles, equipped with front-mounting plates according to EN 15432.
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 15431:2008 | Identical |
| ISO 16028:1999 | Hydraulic fluid power — Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) — Specifications |
| ISO 500-3:2014 | Agricultural tractors — Rear-mounted power take-off types 1, 2, 3 and 4 — Part 3: Main PTO dimensions and spline dimensions, location of PTO |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 1724:2003 | Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage |
| SAE J499_201406 | Parallel Side Splines for Soft Broached Holes in Fittings |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 1185:2003 | Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage |
| ISO 16844-2:2011 | Road vehicles Tachograph systems Part 2: Electrical interface with recording unit |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.