I.S. EN 15435:2008
Current
The latest, up-to-date edition.
PRECAST CONCRETE PRODUCTS - NORMAL WEIGHT AND LIGHTWEIGHT CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
3.1 Terms and definitions
3.2 Symbols
4 Requirements
4.1 General
4.2 Raw materials and concrete
4.3 Dangerous substances
4.4 Geometric properties
4.5 Density
4.6 Moisture movement
4.7 Reaction to fire
4.8 Water vapour permeability
4.9 Mechanical strength
4.10 Acoustic properties
4.11 Thermal properties
4.12 Water absorption by capillarity
4.13 Durability
5 Test methods
5.1 Geometric properties
5.2 Density
5.3 Mechanical strength
6 Classification
7 Marking
8 Evaluation of conformity
8.1 General
8.2 Initial type testing
8.3 Factory production control
Annex A (normative) - Determination of web tensile strength
A.1 Principle
A.2 Apparatus
A.3 Procedure
A.4 Determining the tensile strength of webs
A.5 Test report
Annex B (normative) - Determination of shell flexural strength
B.1 Principle
B.2 Apparatus
B.3 Procedure
B.4 Determining the flexural strength of the shells
B.5 Test report
Annex C (normative) - Sampling for initial type testing
C.1 General
C.2 Sampling procedure
C.3 Place and dates of inspection and acceptance testing
Annex D (normative) - Compliance criteria for initial type
testing and for independent batch
acceptance testing
Annex E (informative) - Example of inspection schemes
E.1 Equipment inspection
E.2 Materials inspection
E.3 Production process inspection
E.4 Product inspection
E.5 Switching rules
Annex F (informative) - Filling pressure of concrete infill
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU
Construction Products Directive
ZA.1 Scope and relevant characteristics
ZA.2 Procedure for attestation of conformity of
concrete shuttering blocks
ZA.3 CE marking and labelling
Bibliography
Describes the properties, performance and test methods of factory made, non-load bearing hollow concrete shuttering blocks made from normal weight or lightweight aggregates or a combination of both.
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 15435:2008 | Identical |
| EN 772-1:2011+A1:2015 | Methods of test for masonry units - Part 1: Determination of compressive strength |
| EN 12390-5:2009 | Testing hardened concrete - Part 5: Flexural strength of test specimens |
| EN 1745:2012 | Masonry and masonry products - Methods for determining thermal properties |
| EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
| EN 772-14:2001 | Methods of test for masonry units - Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units |
| EN 772-16:2011 | Methods of test for masonry units - Part 16: Determination of dimensions |
| EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
| EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| EN 772-11:2011 | Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.