Skip to content
Please enter a keyword to search
  • Preview

    I.S. EN 15827:2011

    Current The latest, up-to-date edition.

    RAILWAY APPLICATIONS - REQUIREMENTS FOR BOGIES AND RUNNING GEARS

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2011

    Publisher:  National Standards Authority of Ireland

    For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
    Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

    Dates of withdrawal of national standards are available from NSAI.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Technical specification and interface management
    5 Engineering process
    6 Structural design criteria
    7 Dynamic performance criteria
    8 Acceptance criteria
    9 Validation of the design
    10 Quality requirements
    11 Maintenance plan
    12 Proven operating envelope
    Annex A (informative) - Technical Specification
    Annex B (informative) - Engineering process requirements
    Annex C (informative) - Design loads
    Annex D (normative) - Component related standards
    Annex E (informative) - Design development and simulation
    Annex F (informative) - Acceptance process flow diagram
    Annex G (informative) - Dynamic performance validation by
            numerical simulation
    Annex H (normative) - Minimum requirements for maintenance
            inspections
    Annex I (informative) - Proven operating envelope
    Annex J (normative) - Standardised bogies/running gear for
            freight wagons
    Annex ZA (informative) - Relationship between this European
             Standard and the Essential Requirements of EU
             Directive 2008/57/EC
    Bibliography

    Abstract - (Show below) - (Hide below)

    Unites all the separate requirements specified in rolling stock TSIs and European Standards relating to bogies and running gear together into an overall requirement and process that ensures a functional and safe design is achieved for a defined operating envelope.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher National Standards Authority of Ireland
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 15687:2010 Railway applications - Testing for the acceptance of running characteristics of freight vehicles with static axle loads higher than 225 kN and up to 250 kN
    EN 15437-1:2009 Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox
    EN 14200:2004 Railway applications - Suspension components - Parabolic springs, steel
    PREN 15437-2 : DRAFT 2010 RAILWAY APPLICATIONS - AXLEBOX CONDITION MONITORING - PERFORMANCE REQUIREMENTS - PART 2: ONBOARD SYSTEMS FOR TEMPERATURE MONITORING
    EN 15313:2016 Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance
    UIC 432 : 12ED 2008 WAGONS - RUNNING SPEEDS - TECHNICAL CONDITIONS TO BE OBSERVED
    EN 1032:2003+A1:2008 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
    EN 14363:2016 Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests
    EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
    EN 15085-1:2007+A1:2013 Railway applications - Welding of railway vehicles and components - Part 1: General
    PREN 15839 : DRAFT 2012 RAILWAY APPLICATIONS - TESTING FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES - FREIGHT WAGONS - TESTING OF RUNNING SAFETY UNDER LONGITUDINAL COMPRESSIVE FORCES
    DIN 25201-1:2015-12 DESIGN GUIDE FOR RAILWAY VEHICLES AND THEIR COMPONENTS - BOLTED JOINTS - PART 1: CLASSIFICATION OF BOLTED JOINTS
    EN 13715:2006+A1:2010 Railway applications - Wheelsets and bogies - Wheels - Tread profile
    DIN 25201-2:2015-12 DESIGN GUIDE FOR RAILWAY VEHICLES AND THEIR COMPONENTS - BOLTED JOINTS - PART 2: DESIGN - MECHANICAL APPLICATIONS
    EN 14817:2006 Railway applications - Suspension components - Air spring control elements
    ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
    EN 60721-3-5:1997 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations
    IEC 60721-3-5:1997 Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations
    CEN/TS 45545-2:2009 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
    DIN 7190:2001-02 INTERFERENCE FITS - CALCULATION AND DESIGN RULES
    EN 13848-1:2003+A1:2008 Railway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry
    EN 15049:2007 Railway applications - Suspension components - Torsion bar, steel
    EN 12299:2009 Railway applications - Ride comfort for passengers - Measurement and evaluation
    EN 12080:2017 Railway applications - Axleboxes - Rolling bearings
    EN 12081:2017 Railway applications - Axleboxes - Lubricating greases
    EN 15085-5:2007 Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation
    NFF 32 101 : 1978 RAILWAY TRANSPORT EQUIPMENT - TWO AXLE CARRYING BOGIE FRAMES - DETERMINATION OF REFERENCE ELEMENTS - GEOMETRICAL CHECKS
    EN ISO 3095:2013 Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013)
    PREN 15892 : DRAFT 2009 RAILWAY APPLICATIONS - NOISE EMISSION - MEASUREMENT OF NOISE INSIDE DRIVER'S CABS
    EN 14535-1:2005+A1:2011 RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 1: BRAKE DISCS PRESSED OR SHRUNK ONTO THE AXLE OR DRIVE SHAFT, DIMENSIONS AND QUALITY REQUIREMENTS
    EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
    EN 12082:2017 Railway applications - Axleboxes - Performance testing
    NFE 22 622 : 1988 MECHANICAL TRANSMISSIONS - PRESSED-ON ASSEMBLIES ON CONICAL BEARINGS - FUNCTION, REALIZATION, CALCULATION
    EN 15273-2:2013+A1:2016 Railway applications - Gauges - Part 2: Rolling stock gauge
    NFE 25 030-1 : 2014 FASTENERS - THREADED CONNECTIONS WITH ISO METRIC THREAD - PART 1: DESIGN RULES FOR TENSILE LOADED BOLTED JOINTS - SIMPLIFIED PROCEDURE - FIXATIONS
    EN 13803-2:2006+A1:2009 Railway applications - Track - Track alignment design parameters - Track gauges 1 435 mm and wider - Part 2: Switches and crossings and comparable alignment design situations with abrupt changes of curvature
    EN 15273-1:2013+A1:2016/AC:2017 RAILWAY APPLICATIONS - GAUGES - PART 1: GENERAL - COMMON RULES FOR INFRASTRUCTURE AND ROLLING STOCK
    EN 15227:2008+A1:2010 Railway applications - Crashworthiness requirements for railway vehicle bodies
    EN 50125-1:2014 Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment
    EN 13913:2003 Railway applications - Rubber suspension components - Elastomer-based mechanical parts
    EN 13104:2009+A2:2012 Railway applications - Wheelsets and bogies - Powered axles - Design method
    EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
    EN 13261:2009+A1:2010 Railway applications - Wheelsets and bogies - Axles - Product requirements
    EN 13597:2003 Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs
    EN 15528:2015 Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure
    EN 15302:2008+A1:2010 Railway applications - Method for determining the equivalent conicity
    EN 13803-1:2010 Railway applications - Track - Track alignment design parameters - Track gauges 1435 mm and wider - Part 1: Plain line
    PREN 14535-2 : DRAFT 2016 RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 2: BRAKE DISCS MOUNTED ONTO THE WHEEL, DIMENSIONS AND QUALITY REQUIREMENTS
    ISO 9001:2015 Quality management systems — Requirements
    EN 13298:2003 Railway applications - Suspension components - Helical suspension springs, steel
    NFE 90 401-2 : 2001 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 2: GENERAL REQUIREMENTS
    EN 13262:2004+A2:2011 Railway applications - Wheelsets and bogies - Wheels - Product requirements
    ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
    EN 13802:2013 Railway applications - Suspension components - Hydraulic dampers
    EN 15663:2017 Railway applications - Vehicle reference masses
    EN 13260:2009+A1:2010 Railway applications - Wheelsets and bogies - Wheelsets - Product requirements
    ISO 3095:2013 Acoustics Railway applications Measurement of noise emitted by railbound vehicles
    UIC 518 : 4ED 2009 TESTING AND APPROVAL OF RAILWAY VEHICLES FROM THE POINT OF VIEW OF THEIR DYNAMIC BEHAVIOUR - SAFETY - TRACK FATIGUE - RIDE QUALITY
    EN 1993-1-9:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-9: FATIGUE
    NFE 22 620 : 1980 PRESSED-ON ASSEMBLIES - DIMENSIONS, TOLERANCES AND SURFACE CONDITION OF USUAL ASSEMBLIES
    EN 12663-1:2010+A1:2014 Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)
    EN 15085-2:2007 Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer
    NFE 22 621 : 2015 MECHANICAL TRANSMISSIONS - PRESSED-ON ASSEMBLIES ON CYLINDRICAL SHAFT - FUNCTION, REALISATION, CALCULATION
    EN 13103:2009+A2:2012 Railway applications - Wheelsets and bogies - Non powered axles - Design method
    EN 13979-1:2003+A2:2011 Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels
    EN 12663-2:2010 Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons
    EN 13749:2011 Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames
    EN 15085-3:2007/AC:2009 RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS
    EN 1999-1-3:2007/A1:2011 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-3: STRUCTURES SUSCEPTIBLE TO FATIGUE
    EN 15686:2010 Railway applications - Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in EN 14363:2005, Annex G
    EN 15085-4:2007 Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective