I.S. EN 15839:2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
RAILWAY APPLICATIONS - TESTING FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES - FREIGHT WAGONS - TESTING OF RUNNING SAFETY UNDER LONGITUDINAL COMPRESSIVE FORCES
Hardcopy , PDF
07-05-2021
English
07-11-2012
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Deviations from requirements
5 Evaluation of the torsional coefficient of a car body c*[t]
6 Condition for dispensation from tests or calculations regarding
the safety against derailment on twisted track
7 Proof of the endurable longitudinal compressive force by
propelling tests
Annex A (normative) - Symbols
Annex B (normative) - Design characteristics of standardised
interface of permanent coupled units
with diagonal buffers for dispensation from
propelling tests
Annex C (informative) - Tests for determination of
the torsional coefficient c[t]* of a car body
Bibliography
Specifies the acceptance process to be followed by vehicles that are operated in trains capable of generating high longitudinal forces and that are susceptible, as a result of their design, to derailment as a result of being subjected to these forces.
| DevelopmentNote |
2012 Edition Re-Issued in November 2015 & incorporates AMD 1 2015. (11/2015)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 15839:2012+A1:2015 | Identical |
| UIC B125 RP 5 : 1977 | METHODS FOR CALCULATING PERMISSIBLE LONGITUDINAL COMPRESSIVE FORCES FOR WAGONS |
| UIC B12 RP 40 : 1984 | PROPELLING TESTS WITH LONG TWO-AXLED WAGONS |
| UIC 571-1 : 5ED 2004 | STANDARD WAGONS - ORDINARY TWO-AXLED WAGONS - CHARACTERISTICS |
| EN 14363:2016 | Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests |
| UIC B12 RP 55 : 1994 | PUSHING TESTS ON LONG 2-AXLED WAGONS WITH BUFFER HEAD RADII RH = 2500 MM AND RV = 2750 MM |
| EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
| UIC B125 RP 6 : 1977 | COMMENTARY ON INTERIM REPORT RP 5 |
| UIC B55 RP 8 : 1983 | CONDITIONS FOR NEGOTIATING TRACK TWISTS - RECOMMENDED VALUES FOR THE TRACK TWIST AND CANT - CALCULATION AND MEASUREMENT OF THE RELEVANT VEHICLE PARAMETERS - VEHICLE TESTING (FINAL REPORT) |
| UIC B12 DT 388 : 2001 | APPROXIMATE DETERMINATION OF THE PERMISSIBLE LONGITUDINAL COMPRESSIVE FORCE FOR TWO-AXLED WAGONS |
| UIC 530-1 : 1982 AMD 3 | CONSTRUCTIONAL CONDITIONS FOR WAGONS TO BE OBSERVED WITH A VIEW TO FITTING THE AUTOMATIC COUPLER OF THE MEMBER RAILWAYS OF THE UIC AND OSJD RESPECTIVELY |
| 2004/50/EC : 2004 | DIRECTIVE 2004/50/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 APRIL 2004 AMENDING COUNCIL DIRECTIVE 1996/48/EC ON THE INTEROPERABILITY OF THE TRANS-EUROPEAN HIGH-SPEED RAIL SYSTEM AND DIRECTIVE 2001/16/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL ON THE INTEROPERABILITY OF THE TRANS-EUROPEAN CONVENTIONAL RAIL SYSTEM |
| EN 15566:2016 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
| UIC B12 RP 70 : 1999 | PUSHING TESTS TO DETERMINE THE MAXIMUM PERMISSIBLE LONGITUDINAL COMPRESSIVE FORCES FOR BOGIE WAGONS |
| UIC 517 : 7ED 2006 | WAGONS - SUSPENSION GEAR - STANDARDISATION |
| UIC 522 : 4ED 1990 | TECHNICAL CONDITIONS TO BE FULFILLED BY THE AUTOMATIC COUPLER OF THE UIC AND OSJD MEMBER RAILWAYS |
| UIC B12 RP 49 : 1991 | BASES OF CALCULATION FOR PREPARING THE SET OF DIAGRAMS FOR UIC LEAFLET 530-2 |
| UIC B12 RP 69 : 1998 | PROPELLING TESTS TO ESTABLISH THE LCF THAT CAN BE SUSTAINED BY BOGIE WAGONS |
| UIC 530-2 : 7ED 2011 | WAGONS - RUNNING SAFETY |
| UIC 571-4 : 6ED 2014 | STANDARD WAGONS - WAGONS FOR COMBINED TRANSPORT - CHARACTERISTICS |
| UIC B12 DT 135 : 1995 | METHODES DE CALCUL D'APPLICATION GENERALE POUR L'ETUDE DE NOUVEAUX TYPES DE WAGONS OU DE NOUVEAUX BOGIES DE WAGONS |
| PREN 16235 : DRAFT 2011 | RAILWAY APPLICATIONS - TESTING FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES - FREIGHT WAGONS - CONDITIONS FOR DISPENSATION OF FREIGHT WAGONS WITH DEFINED CHARACTERISTICS FROM ON-TRACK TESTS ACCORDING TO EN 14363 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.