I.S. EN 16932-1:2018
Current
The latest, up-to-date edition.
DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PUMPING SYSTEMS - PART 1: GENERAL REQUIREMENTS
06-05-2018
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
National foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Health and safety
6 Types of pumping systems
7 Planning of pumping systems
8 Detailed design of pumping stations
and vacuum stations
9 Detailed design of rising mains and
vacuum pipelines
10 Installation
11 Testing and commissioning
12 Operations and maintenance
Bibliography
Describes requirements for design, construction and acceptance testing of wastewater pumping systems in drain and sewer systems outside the buildings they are intended to serve.
| DevelopmentNote |
Supersedes I.S. EN 1671 & I.S. EN 1091. (05/2018)
|
| DocumentType |
Standard
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 16932-1:2018 | Identical |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| EN 1295-1:1997 | Structural design of buried pipelines under various conditions of loading - Part 1: General requirements |
| EN 15885:2010 | Classification and characteristics of techniques for renovation and repair of drains and sewers |
| EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 16933-2 | Drain and sewer systems outside buildings - Design - Part 2: Hydraulic design |
| EN 13380:2001 | General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
| EN 16323:2014 | Glossary of wastewater engineering terms |
| EN ISO 17769-1:2012 | Liquid pumps and installation - General terms, definitions, quantities, letter symbols and units - Part 1: Liquid pumps (ISO 17769-1:2012) |
| EN 476:2011 | General requirements for components used in drains and sewers |
| EN 60034-30-1:2014 | Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code) |
| EN 12889:2000 | Trenchless construction and testing of drains and sewers |
| EN 61439-2:2011 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES (IEC 61439-2:2011) |
| ISO 17769-1:2012 | Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 1: Liquid pumps |
| EN 809 : 1998 COR 2010 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| EN ISO 17769-2:2012 | Liquid pumps and installation - General terms, definitions, quantities, letter symbols and units - Part 2: Pumping System (ISO 17769-2:2012) |
| EN 752:2017 | Drain and sewer systems outside buildings - Sewer system management |
| ISO 17769-2:2012 | Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 2: Pumping system |
| EN 12255-9:2002 | Wastewater treatment plants - Part 9: Odour control and ventilation |
| EN 1610:2015 | Construction and testing of drains and sewers |
| EN 14457:2004 | General requirements for components specifically designed for use in trenchless construction of drains and sewers |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| 2009/125/EC : 2009 AMD 1 2012 | DIRECTIVE 2009/125/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 21 OCTOBER 2009 ESTABLISHING A FRAMEWORK FOR THE SETTING OF ECODESIGN REQUIREMENTS FOR ENERGY-RELATED PRODUCTS (RECAST) (TEXT WITH EEA RELEVANCE) |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.