I.S. EN 1999-1-4:2007
Current
The latest, up-to-date edition.
EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING (INCLUDING IRISH NATIONAL ANNEX)
Hardcopy , PDF
English
01-01-2007
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
National Annex for EN 1999-1-4
1 General
2 Basis of design
3 Materials
4 Durability
5 Structural analysis
6 Ultimate limit states
7 Serviceability limit states
8 Joints with mechanical fasteners
9 Design assisted by testing
Annex A [normative] - Testing procedures
Annex B [informative] - Durability of fasteners
Bibliography
Annex NA (informative) - Irish National Annex to
Eurocode 9: Design of aluminium structures -
Part 1-4: Cold-formed structural sheeting
Introduction
NA.1 Scope
NA.2 Nationally Determined Parameters
NA.3 Decisions on the status of informative annexes
NA.4 References to non-contradictory complementary
information
Bibliography
Provides design requirements for cold-formed trapezoidal aluminium sheeting. It applies to cold-formed aluminium products made from hot rolled or cold rolled sheet or strip that have been cold-formed by such processes as cold-rolled forming or press-breaking.
| DevelopmentNote |
Supersedes I.S. ENV 1999-1-1, I.S. ENV 1999-1-2 and I.S. ENV 1999-2. (10/2007) Now includes Irish National Annex 2010 which is also available as a separate document, See I.S. EN 1999-1-4 NATIONAL ANNEX. (03/2010)
|
| DocumentType |
Standard
|
| Pages |
77
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS EN 1999-1-4 : 2007 AMD 1 2011 | Identical |
| NBN EN 1999-1-4 : 2007 AMD 1 2011 | Identical |
| SN EN 1999-1-4 : 2007 AMD 1 2011 | Identical |
| NF EN 1999-1-4 : 2007 AMD 1 2011 | Identical |
| BS EN 1999-1-4 : 2007 | Identical |
| UNI EN 1999-1-4 : 2011 | Identical |
| NEN EN 1999-1-4 : 2011 | Identical |
| EN ISO 1479:2011 | Hexagon head tapping screws (ISO 1479:2011) |
| EN ISO 15981:2002 | Open end blind rivets with break pull mandrel and protruding head - AIA/AIA (ISO 15981:2002) |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN ISO 15481:1999 | Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999) |
| EN ISO 15977:2002 | Open end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15977:2002) |
| EN ISO 1481:2011 | Slotted pan head tapping screws (ISO 1481:2011) |
| EN 485-2:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
| ISO 7049:2011 | Cross-recessed pan head tapping screws |
| EN 508-2:2008 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| PREN 1090-1 : DRAFT 2004 | STEEL AND ALUMINIUM STRUCTURAL COMPONENTS - GENERAL DELIVERY CONDITIONS |
| DIN 18807-3:1987-06 | TRAPEZOIDAL SHEETING IN BUILDING - STEEL TRAPEZOIDAL SHEETING - STRENGTH ANALYSIS, STRUCTURAL DESIGN |
| EN ISO 15974:2000 | Closed end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15974:2000) |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| PD 6702-1:2009 | Structural use of aluminium Recommendations for the design of aluminium structures to BS EN 1999 |
| DIN 18807-1 : 1987 AMD 1 2001 | TRAPEZOIDAL SHEETING IN BUILDING - TRAPEZOIDAL STEEL SHEETING - GENERAL REQUIREMENTS AND DETERMINATION OF LOADBEARING CAPACITY BY CALCULATION |
| EN ISO 15982:2002 | Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA (ISO 15982:2002) |
| PD 6705-3:2009 | Structural use of steel and aluminium Recommendations for the execution of aluminium structures to BS EN 1090-3 |
| EN ISO 15480:1999 | Hexagon washer head drilling screws with tapping screw thread (ISO 15480:1999) |
| EN ISO 15973:2000 | Closed end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15973:2000) |
| EN ISO 15978:2002 | Open end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15978:2002) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.