S.R. 16:2016
|
GUIDANCE ON THE USE OF I.S. EN 12620:2002+A1:2008 - AGGREGATES FOR CONCRETE |
EN 12390-3:2009/AC:2011
|
TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
EN 45501 : 2015
|
METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
EN 12390-8:2009
|
Testing hardened concrete - Part 8: Depth of penetration of water under pressure |
CR 13902:2000
|
Test methods for determining the water/cement ratio of fresh concrete |
EN 196-2:2013
|
Method of testing cement - Part 2: Chemical analysis of cement |
EN 197-1:2011
|
Cement - Part 1: Composition, specifications and conformity criteria for common cements |
ISO 7980:1986
|
Water quality Determination of calcium and magnesium Atomic absorption spectrometric method |
CR 13901:2000
|
The use of the concept of concrete families for the production and conformity control of concrete |
I.S. EN 1992-1-1:2004
|
EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
EN 12504-3:2005
|
Testing concrete in structures - Part 3: Determination of pull-out force |
EN 12350-2:2009
|
Testing fresh concrete - Part 2: Slump-test |
EN 12350-6:2009
|
Testing fresh concrete - Part 6: Density |
ISO 3951:1989
|
Sampling procedures and charts for inspection by variables for percent nonconforming |
DIN 4030-2:2008-06
|
ASSESSMENT OF WATER, SOIL AND GASES FOR THEIR AGGRESSIVENESS TO CONCRETE - PART 2: SAMPLING AND ANALYSIS OF WATER AND SOIL SAMPLES |
EN 12390-7:2009
|
Testing hardened concrete - Part 7: Density of hardened concrete |
I.S. EN 15167-1:2006
|
GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA |
PREN 13791 : DRAFT 2017
|
ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
1990/384/EEC : 1990
|
COUNCIL DIRECTIVE OF 20 JUNE 1990 ON THE HARMONIZATION OF THE LAWS OF THE MEMBER STATES RELATING TO NON-AUTOMATIC WEIGHING INSTRUMENTS |
EN 12390-5:2009
|
Testing hardened concrete - Part 5: Flexural strength of test specimens |
EN 12350-3:2009
|
Testing fresh concrete - Part 3: Vebe test |
EN 1097-3:1998
|
Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids |
EN 1008:2002
|
Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
EN 12504-2:2012
|
TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
I.S. EN 13791:2007
|
ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
EN 933-1:2012
|
Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
EN 12350-5:2009
|
Testing fresh concrete - Part 5: Flow table test |
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
EN 12390-4:2000
|
Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines |
EN 12620:2002+A1:2008
|
Aggregates for concrete |
EN 12390-1:2012
|
TESTING HARDENED CONCRETE - PART 1: SHAPE, DIMENSIONS AND OTHER REQUIREMENTS FOR SPECIMENS AND MOULDS |
EN 12504-4:2004
|
Testing concrete - Part 4: Determination of ultrasonic pulse velocity |
EN 12350-4:2009
|
Testing fresh concrete - Part 4: Degree of compactability |
EN 450 : 1994
|
FLY ASH FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND QUALITY CONTROL |
EN 12390-2:2009
|
Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
ISO 9001:2015
|
Quality management systems — Requirements |
EN 12350-1:2009
|
Testing fresh concrete - Part 1: Sampling |
EN 1097-6:2013
|
Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
ENV 13670-1 : DRAFT 2000
|
EXECUTION OF CONCRETE STRUCTURES - PART 1 - COMMON |
ISO 4316:1977
|
Surface active agents — Determination of pH of aqueous solutions — Potentiometric method |
ISO 7150-2:1986
|
Water quality Determination of ammonium Part 2: Automated spectrometric method |
EN 12390-6:2009
|
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens |
EN 12878:2014
|
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test |
EN 12350-7:2009
|
Testing fresh concrete - Part 7: Air content - Pressure methods |
ISO 7150-1:1984
|
Water quality — Determination of ammonium — Part 1: Manual spectrometric method |
EN 13055-1:2002/AC:2004
|
LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
EN 12504-1:2009
|
Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression |
ENV 1992-1-1 : DRAFT 91 COR 1992
|
EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - GENERAL RULES AND RULES FOR BUILDINGS |
CR 1901:1995
|
Regional Specifications and Recommendations for the avoidance of damaging alkali silica reactions in concrete |
EN 934-2:2009+A1:2012
|
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling |