I.S. EN 4652-001:2015
Current
Current
The latest, up-to-date edition.
AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 001: TECHNICAL SPECIFICATION
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2015
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Description
5 Definition and mass
6 Test methods
7 Quality assurance
8 Designation and marking
9 Packaging
10 Packing
11 Storage
Bibliography
Defines the required characteristics, test methods, qualification and acceptance conditions of coaxial, radio frequency connectors used with flexible radio frequency cables in accordance with EN 4604-001 and semi-rigid coaxial cables.
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 4652-001:2015 | Identical |
| EN 2591-212:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 212: Surface transfer impedance |
| EN 2591-306:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 306: Mould growth |
| EN 2591-205:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B5: Housing (shell) electrical continuity |
| EN 2591-301:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part C1: Endurance at temperature |
| EN 2591-311:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 311: Low air pressure |
| EN 2591-305:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 305: Rapid change of temperature |
| EN 2591-319:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 319: Gastightness of solderless wrapped connections |
| EN 2591-213:1997 | Aeropsace series - Elements of electrical and optical connection - Test methods - Part 213: Shielding effectiveness from 100 MHz to 1 GHz |
| EN 2591-418:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 418: Gauge insertion/extraction forces (female contacts) |
| EN 2591-425:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 425: Unwrapping capability, solderless wrapped connections |
| EN 2591-502:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 502: Restricted entry |
| EN 2591-316:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 316: Ozone resistance |
| EN 2591-315:2015 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance |
| EN 2591-405:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 405: Axial load |
| MIL-PRF-39012 Revision F:2014 | CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
| EN 2591-308:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 308: Sand and dust |
| TR 6058 : 2011 | AEROSPACE SERIES - CABLE CODE IDENTIFICATION LIST |
| EN 2591-318:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 318: Fire-resistance |
| EN 2591-401:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part D1: Acceleration, steady state |
| EN 2591-412:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 412: Contact insertion and extraction forces |
| EN 2591-414:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 414: Unmating of lanyard release connectors |
| EN 2591-203:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B3: Electrical continuity at microvolt level |
| EN 2591-408:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 408: Mating and unmating forces |
| EN 2591-323:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 323: Thermal shock |
| EN 4604-001:2009 | Aerospace series - Cable, electrical, for signal transmission - Part 001: Technical specification |
| EN 2591-201:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B1: Contact resistance - Low level |
| EN 2591-515:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 515: Hydrolytic stability |
| EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
| EN 2591-417:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 417: Tensile strength (crimped connection) |
| EN 2591-322:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 322: Hermeticity |
| EN 2591-312:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 312: Air leakage |
| EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
| EN 2591-424:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 424: Stripping force, solderless wrapped connections |
| EN 2591-514:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and flux |
| EN 2591-406:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 406: Mechanical endurance |
| EN 2591-216:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 216: Engagement depth of contacts |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| EN 2591-410:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 410: Insert retention in housing (axial) |
| EN 2591-320:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 320: Simulated solar radiation at ground level |
| EN 2591-513:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 513: Magnetic permeability |
| EN 2591-223:2007 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 223: Measurement of characteristic impedance of a coaxial connector or contact |
| EN 2591-420:2006 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories |
| EN 2591-204:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B4: Discontinuity of contacts in the microsecond range |
| EN 2591-427:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 427: Robustness of protective cover attachment |
| EN 2591-505:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 505: Contact protection effectiveness (scoop-proof) |
| EN 2591-206:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B6: Measurement of insulation resistance |
| EN 2591-507:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 507: Plating porosity |
| EN 2591-317:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 317: Flammability |
| EN 2591-208:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B8: Temperature rise due to rated current |
| EN 2591-409:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 409: Contact retention in insert |
| EN 2591-226:2007 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 226: Corona level |
| EN 2591-313:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 313: Artificial rain |
| EN 2591-210:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 210: Electrical overload |
| EN 2591-506:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 506: Use of tools |
| EN 2591-214:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse |
| EN 2591-407:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 407: Durability of contact retention system and seals |
| EN 2591-321:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 321: Damp heat, cyclic test |
| EN 2591-314:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 314: Immersion at low air pressure |
| EN 2591-509:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts |
| EN 2591-413:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 413: Holding force of grounding spring system |
| EN 2424:2008 | Aerospace series - Marking of aerospace products |
| EN 2591-224:2007 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 224: RF leakage |
| EN 2591-309:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 309: Dry heat |
| EN 2591-501:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderability |
| EN 2591-304:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 304: Damp heat steady state |
| EN 2591-402:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock |
| EN 2591-503:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 503: Contact deformation after crimping |
| EN 2591-411:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 411: Insert retention in housing (torsional) |
| EN 2591-419:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 419: Stability of male contacts in insert |
| EN 2591-202:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B2: Contact resistance at rated current |
| EN 2591-302:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 302: Climatic sequence |
| EN 2591-209:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B9: Current temperature derating |
| EN 2591-221:2007 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 221: Voltage Standing Wave Ratio (VSWR) |
| EN 2591-508:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts |
| EN 2591-222:2007 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 222: Insertion Loss (I.L.) |
| EN 2591-426:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 426: Contact retention system effectiveness |
| EN 2591-307:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
| EN 3909:2016 | Aerospace series - Test fluids and test methods for electrical and optical components and sub-assemblies |
| EN 2591-225:2007 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 225: RF high potential withstanding voltage |
| EN 2591-207:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B7: Voltage proof test |
| EN 2591-416:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 416: Contact bending strength |
| EN 2591-324:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 324: Interfacial sealing |
| EN 2591-512:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shell |
| EN 2591-415:2001 | Aerospace series - Elements of electrical and optical connection - Test methodsPart 415: Test probe damage (female contacts) |
| EN 2591-310:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 310: Cold |
| EN 2591-403:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration |
| EN 2591-404:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 404: Transverse load |
| EN 2591-303:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 303: Cold/low pressure and damp heat |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.