I.S. EN 60107-1:1999
Current
The latest, up-to-date edition.
METHODS OF MEASUREMENT ON RECEIVERS FOR TELEVISION BROADCAST TRANSMISSION - PART 1: GENERAL CONSIDERATIONS - MEASUREMENTS ON DISPLAYS AT RADIO AND VIDEO FREQUENCIES
Hardcopy , PDF
English
01-01-1999
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1 General
1.1 Scope
1.2 Normative references
2 General explanation of terms
2.1 Definitions
2.2 Types of receivers
2.3 Peripheral connectors
3 General notes on measurement
3.1 General conditions
3.2 Test signals
3.3 Radiofrequency (r.f.) television signal
3.4 Radiofrequency (r.f.) input signals
3.5 Measuring system and test instruments
3.6 Standard measuring conditions
4 Initial tests under general operating conditions
4.1 Electrical and mechanical performance
4.2 Power consumption
5 Characteristics of radiofrequency channel
5.1 Tuning characteristics
5.2 Sensitivity
5.3 Selectivity and response to undesired signals
6 Characteristics of luminance and chrominance channels
6.1 Characteristics of the luminance and chrominance channels
6.2 Characteristics of chrominance channels
6.3 Demodulation characteristics of chrominance signals inherent
in each colour system (NTSC, PAL and SECAM)
7 Characteristics of displayed pictures
7.1 General properties of the picture
7.2 Synchronizing quality
7.3 Picture size stability versus changes of CRT beam current
7.4 Characteristics inherent in projection type displays
7.5 Characteristics inherent in LCD displays
7.6 Characteristics inherent in widescreen displays
8 Characteristics inherent in the receivers using double-rate
scan displays
8.1 General
9 Disturbance on the picture due to signals inserted into the
field blanking interval
9.1 Introduction
9.2 Method of measurement
9.3 Presentation of results
10 Characteristics inherent in teletext signals
10.1 General
10.2 General measuring conditions
10.3 Characteristics of teletext signal
Annexes
A - Analytical description of the offset-carrier colour bar signal
B - Calculation of the relative amplitude and the group delay
by the response of a modulated sine-squared pulse
C - Bibliography
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Covers the standard conditions and methods of measurement on television receivers that conform to the terrestrial broadcast television standards specified by the ITU-R.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
418
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 60107-1:1997 | Identical |
| IEC 60107-1:1997 | Identical |
| DIN EN 60107-1:1998-01 | Identical |
| NBN EN 60107-1 : 1997 | Identical |
| EN 60107-1:1997 | Identical |
| NF EN 60107-1 : 1997 | Identical |
| SN EN 60107-1 : 1997 | Identical |
| CISPR 20:2006+AMD1:2013 CSV | Sound and television broadcast receivers and associated equipment -Immunity characteristics - Limits and methods of measurement |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| CISPR 13:2009+AMD1:2015 CSV | Sound and television broadcast receivers and associated equipment -Radio disturbance characteristics - Limits and methods of measurement |
| IEC 60107-2:1997 | Methods of measurement on receivers for television broadcast transmissions - Part 2: Audio channels - General methods and methods for monophonic channels |
| IEC 60107-6:1989 | Recommended methods of measurement on receivers for television broadcast transmissions. Part 6: Measurements under conditions different from broadcast signal standards |
| EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
| EN 60107-5:1992/A1:1999 | RECOMMENDED METHODS OF MEASUREMENT ON RECEIVERS FOR TELEVISION BROADCAST TRANSMISSION - PART 5: ELECTRICAL MEASUREMENTS ON MULTICHANNEL SOUND TELEVISION RECEIVERS USING THE NICAM TWO-CHANNEL DIGITAL SOUND-SYSTEM |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| IEC 60107-5:1992+AMD1:1999 CSV | Recommended methods of measurements on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system |
| IEC 60933-5:1992 | Audio, video and audiovisual systems - Interconnections and matching values - Part 5: Y/C connector for video systems - Electrical matching values and description of the connector |
| IEC 61079-3:1993 | Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band - Part 3: Electrical measurements of overall performance of receiver systems comprising an outdoor unit and a DBS tuner unit |
| IEC 60107-3:1988+AMD1:1999 CSV | Recommended methods of measurement on receivers for television broadcast transmissions - Part 3: Electrical measurements on multichannel sound television receivers using subcarrier systems |
| IEC 61079-2:1992 | Methods of measurement on receivers for satellite broadcasttransmissions in the 12 GHz band - Part 2: Electrical measurementson DBS tuner units |
| EN 60933-5:1993 | Audio, video and audiovisual systems - Interconnections and matching values - Part 5: Y/C connector for video systems - Electrical matching values and description of the connector |
| IEC 60569:1977 | Informative guide for subjective tests on television receivers |
| EN 60107-2:1997/corrigendum:1997 | METHODS OF MEASUREMENT ON RECEIVERS FOR TELEVISION BROADCAST TRANSMISSIONS - AUDIO CHANNELS - GENERAL METHODS AND METHODS FOR MONOPHONIC CHANNELS |
| HD 567.6 : 200S1 | RECOMMENDED METHODS OF MEASUREMENT ON RECEIVERS FOR TELEVISION BROADCAST TRANSMISSIONS - MEASUREMENT UNDER CONDITIONS DIFFERENT FROM BROADCAST SIGNAL STANDARDS |
| IEC 61079-1:1992 | Methods of measurement on receivers for satellite broadcasttransmissions in the 12 GHz band - Part 1: Radio-frequencymeasurements on outdoor units |
| IEC 61079-5:1993 | Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band - Part 5: Electrical measurements on decoder units for MAC/packet systems |
| IEC 60107-4:1988+AMD1:1999 CSV | Recommended methods of measurement on receivers for television broadcast transmissions - Part 4: Electrical measurements on multichannel sound television receivers using the two-carrier FM-system |
| IEC 60728-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths |
| IEC 61079-4:1993 | Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band - Part 4: Electrical measurements on sound/data decoder units for the digital subcarrier NTSC system |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.