• I.S. EN 60454-2:2007

    Current The latest, up-to-date edition.

    PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2007

    Publisher:  National Standards Authority of Ireland

    For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
    Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

    Dates of withdrawal of national standards are available from NSAI.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    1 Scope
    2 Normative references
    3 Conditioning and specimen preparation
    4 Determination of thickness
       4.1 Test apparatus
       4.2 Test specimens
       4.3 Procedure
       4.4 Results
    5 Determination of width
       5.1 Method A
       5.2 Method B
       5.3 Method C
    6 Determination of roll length
       6.1 Principle
       6.2 Method A - Measurement of turns method
       6.3 Method B - Length sensor method
    7 Corrosion-related properties
       7.1 General
       7.2 Preparation of water extract for pH and conductivity
           determinations
       7.3 Determination of pH value of water extract
       7.4 Determination of conductivity of water extract
       7.5 Detection of corrosive sulfur
       7.6 Insulation resistance method
       7.7 Visual method
       7.8 Wire tensile strength method
    8 Tensile strength and elongation at break
       8.1 Apparatus
       8.2 Test specimens
       8.3 Procedure
       8.4 Results
    9 Low-temperature properties
       9.1 Principle
       9.2 Test specimen
       9.3 Procedure
       9.4 Flexibility
       9.5 Electric strength
       9.6 Results
    10 Resistance to penetration at elevated temperatures
       10.1 Apparatus
       10.2 Test specimens
       10.3 Procedure
       10.4 Results
    11 Adhesion
       11.1 Principle
       11.2 Materials
       11.3 Apparatus
       11.4 Test samples and test pieces
       11.5 Procedure
       11.6 Expression of results
    12 Adhesion to backing at low temperatures
       12.1 Test specimens
       12.2 Procedure
       12.3 Results
    13 Shear adhesion to backing after liquid immersion
       13.1 Apparatus
       13.2 Test specimens
       13.3 Procedure
       13.4 Results
    14 Curing properties of thermosetting adhesive tapes
       14.1 Bond separation during thermal treatment (adhesive to backing)
       14.2 Bond separation after thermal treatment (adhesion to backing)
    15 Flagging tests
       15.1 Principle
       15.2 Apparatus
       15.3 Test specimens
       15.4 Preparation of specimens for test
       15.5 Test conditions
       15.6 Results
    16 Water vapor permeability
       16.1 Apparatus
       16.2 Test specimens
       16.3 Procedure
       16.4 Results
    17 Electric strength
       17.1 General
       17.2 Test specimens
       17.3 Procedure
       17.4 Results
    18 Electric strength after humid conditioning
    19 Resistance to flame propagation
       19.1 Principle
       19.2 Apparatus
       19.3 Test specimen
       19.4 Procedure
       19.5 Results
    20 Flame test
       20.1 Principle
       20.2 Apparatus
       20.3 Preparation of test specimen
       20.4 Procedure
       20.5 Results
    21 Thermal endurance
       21.1 Determination of thermal endurance (based on IEC 60216-1
            and IEC 60216-2)
       21.2 Voltage breakdown
       21.3 Loss of mass
    Annex A (normative) Rollers to be used in various tests
    Annex ZA (normative) Normative references to international
             publications with their corresponding European
             publications
    Bibliography

    Abstract - (Show below) - (Hide below)

    Describes methods of test for pressure-sensitive adhesive tapes for electrical purposes.

    General Product Information - (Show below) - (Hide below)

    Development Note For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
    Document Type Standard
    Publisher National Standards Authority of Ireland
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
    EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
    ISO 683-13:1974 Heat-treated steels, alloy steels and free-cutting steels Part 13: Wrought stainless steels
    ISO 10093:1998 Plastics Fire tests Standard ignition sources
    ISO 383:1976 Laboratory glassware — Interchangeable conical ground joints
    IEC 60216-2:2005 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
    EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
    EN 60216-3:2006 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 3: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS
    EN 60216-2:2005 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
    ISO 3071:2005 Textiles Determination of pH of aqueous extract
    IEC 60589:1977 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
    EN ISO 10093:1998 PLASTICS - FIRE TESTS - STANDARD IGNITION SOURCES
    EN 1939 : 2003 SELF ADHESIVE TAPES - DETERMINATION OF PEEL ADHESION PROPERTIES
    ISO 468:1982 Surface roughness — Parameters, their values and general rules for specifying requirements
    ISO 3599:1976 Vernier callipers reading to 0,1 and 0,05 mm
    EN 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
    EN 60243-1:2013 ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013)
    IEC 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
    EN ISO 3071:2006 Textiles - Determination of pH of aqueous extract (ISO 3071:2005)
    ISO 527-3:1995 Plastics Determination of tensile properties Part 3: Test conditions for films and sheets
    HD 381 : 200S1 METHODS OF TEST FOR THE DETERMINATION OF IONIC IMPURITIES IN ELECTRICAL INSULATING MATERIALS BY EXTRACTION WITH LIQUIDS
    EN ISO 527-3:1995/AC:2002 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS
    ISO 2194:1991 Industrial screens — Woven wire cloth, perforated plate and electroformed sheet — Designation and nominal sizes of openings
    IEC 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
    IEC 60216-3:2006 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective