I.S. EN 61076-3-001:2008
Current
The latest, up-to-date edition.
CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-001: RECTANGULAR CONNECTORS - BLANK DETAIL SPECIFICATION
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
FOREWORD
INTRODUCTION
1 General information
1.1 Scope
1.2 Normative references
2 Technical information
2.1 Terms and definitions
2.2 Systems of levels
2.2.1 Performance levels
2.2.2 Compatibility levels, according to IEC 61076-1:2006
2.3 Classification into climatic categories
2.4 Clearance and creepage distances
2.5 Current-carrying capacity
2.6 Marking
3 Dimensional information
3.1 General
3.2 Isometric view and common features
3.2.1 Common features
3.2.2 Reference system
3.3 Engagement (mating) information
3.3.1 Engaging (mating) direction
3.3.2 Perpendicular to the engaging (mating) direction
3.3.3 Inclination
3.4 Fixed connectors
3.4.1 Dimensions
3.4.2 Terminations
3.5 Free connectors
3.5.1 Dimensions
3.5.2 Terminations
3.6 Accessories
3.7 Mounting information for connectors
3.7.1 Mounting on panels
3.8 Gauges
3.8.1 Sizing gauges and retention force gauges
3.8.2 Mechanical function,
engaging/separating/insertion/withdrawal force gauges
3.8.3 Probes
3.8.4 Contact resistance gauge
3.8.5 Test panel (for voltage proof test)
3.8.6 Test panel (for EMC/crosstalk, etc.)
4 Characteristics
4.1 General
4.2 Pin assignment and other definitions
4.3 Classification into climatic categories
4.4 Electrical characteristics
4.4.1 Creepage and clearance distances
4.4.2 Voltage proof
4.4.3 Current-carrying capacity
4.4.4 Contact and shield resistance
4.4.5 Insulation resistance
4.4.6 Impedance
4.4.7 Transmission characteristics
4.5 Mechanical characteristics
4.5.1 Mechanical operation
4.5.2 Effectiveness of connector coupling devices
4.5.3 Engaging and separating forces (or insertion and
withdrawal forces)
4.5.4 Contact retention in insert
4.5.5 Polarizing and coding method
4.6 Other characteristics
4.6.1 Shock and vibration (method either random or
sine)
4.6.2 Degree of protection provided by enclosures
(IP-code)
4.6.3 Screen and shielding properties
4.7 Environmental aspects
4.7.1 Marking of insulation material (plastics)
4.7.2 Design/use of material
5 Test schedule
5.1 General
5.1.1 Climatic category
5.1.2 Creepage and clearance distances
5.1.3 Arrangement for contact resistance measurement
5.1.4 Arrangement for dynamic stress tests
5.1.5 Arrangement for testing static load, axial
5.1.6 Wiring of specimens
5.2 Test schedules
5.2.1 Basic (minimum) test schedule
5.2.2 Full test schedule
5.3 Test procedures and measuring methods
5.4 Pre-conditioning
5.5 Wiring and mounting of specimens
5.5.1 Wiring
5.5.2 Mounting
Annex A (normative) New tests and additional test phases
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Contains requirements for style, layout and content of detail product specifications for rectangular connectors.
DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
DocumentType |
Standard
|
Pages |
164
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Standards | Relationship |
BS EN 61076-3-001:2000 | Identical |
EN 61076-3-001:2008 | Identical |
IEC 61076-3-001:2008 | Identical |
DIN EN 61076-3-001:2009-07 | Identical |
SN EN 61076-3-001 : 2000 | Identical |
IEC GUIDE 109:2012 | Environmental aspects - Inclusion in electrotechnical product standards |
IEC 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
IEC 61076-3:2008 | Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification |
EN 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
EN 62197-1 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - QUALITY ASSESSMENT REQUIREMENTS - PART 1: GENERIC SPECIFICATION |
IEC 62197-1:2006 | Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification |
EN 61076-3:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3: RECTANGULAR CONNECTORS - SECTIONAL SPECIFICATION |
IEC GUIDE 114:2005 | Environmentally conscious design - Integrating environmental aspects into design and development of electrotechnical products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.