• I.S. EN 61076-4-110:2002

    Current The latest, up-to-date edition.

    CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2002

    Publisher:  National Standards Authority of Ireland

    For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
    Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

    Dates of withdrawal of national standards are available from NSAI.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    1 General data
      1.1 Recommended method for mounting
           1.1.1 Number of signal contacts and contact
                  cavities
      1.2 Ratings and characteristics
      1.3 Normative references
      1.4 Marking
      1.5 IEC type designation
      1.6 Ordering information
    2 Technical information
      2.1 Definitions
      2.2 Surveys of styles and variants
           2.2.1 Styles of connectors
           2.2.2 Survey of termination variants
           2.2.3 Survey of cable diameters
      2.3 Information on application
           2.3.1 Complete connectors (pairs)
           2.3.2 Fixed board connectors
           2.3.3 Free cable connectors
           2.3.4 Shielding and grounding
    3 Dimensional information
      3.1 General
      3.2 Isometric view and common features
           3.2.1 Common features
           3.2.2 Reference system
           3.2.3 Height dimensions
           3.2.4 Width dimensions
           3.2.5 Depth dimensions
      3.3 Mating information
           3.3.1 Engaging direction contacts range
           3.3.2 Perpendicular to engaging direction
           3.3.3 Inclination
      3.4 Fixed board connectors
           3.4.1 Common dimensions
           3.4.2 Dimensions of signal contacts
           3.4.3 Termination of signal contacts
      3.5 Free cable connectors
           3.5.1 Dimensions of the free connectors
           3.5.2 Terminations
      3.6 Accessories
           3.6.1 Latching devices
      3.7 Mounting information for fixed board connectors
           3.7.1 Straight version
           3.7.2 Right-angle version
      3.8 Gauges
           3.8.1 Gauge for mating part of shielding (fixed
                  connector)
           3.8.2 Test gauge for static load
    4 Characteristics
      4.1 Climatic category
      4.2 Electrical
           4.2.1 Creepage and clearance distances
           4.2.2 Voltage proof
           4.2.3 Current carrying capacity
           4.2.4 Initial contact resistance
           4.2.5 Initial insulation resistance
      4.3 Mechanical
           4.3.1 Mechanical operation
           4.3.2 Engaging and separating forces
           4.3.3 Contact retention in insert
           4.3.4 Static load, transverse
           4.3.5 Gauge retention force
           4.3.6 Vibration (sinusoidal)
           4.3.7 Shock
           4.3.8 Polarizing method
           4.3.9 Latch retention in housing (axial) -
                  Effectiveness of coupling devices
           4.3.10 Cable clamp resistance to cable rotation
           4.3.11 Cable clamp robustness
           4.3.12 Cable clamp resistance to cable pulling
           4.3.13 Cable clamp resistance to cable torsion
           4.3.14 Shielding contact spring holding force
      4.4 Electromagnetic compatibility (EMC)
           4.4.1 Shielding effectiveness of connectors
    5 Test schedule
      5.1 General
           5.1.1 Arrangement for contact resistance
                  measurement
           5.1.2 Arrangement for dynamic stress tests
           5.1.3 Arrangements for testing static load,
                  transverse
           5.1.4 Arrangement for voltage proof and
                  polarization voltage
           5.1.5 Arrangement for shielding effectiveness
                  test
      5.2 Test schedule tables
           5.2.1 Basic test schedule
           5.2.2 Full test schedule
    6 Quality assessment procedures
      6.1 Qualification approval testing
           6.1.1 Method 1
           6.1.2 Method 2
      6.2 Quality conformance inspection
           6.2.1 Lot-by-lot tests
           6.2.2 Periodic tests
      6.3 Delayed delivery, re-inspection
    Annex ZA (normative) Normative references to international
             publications with their corresponding European
             publications
    Figures
    Tables

    Abstract - (Show below) - (Hide below)

    Describes a connector family having a basic grid of 2,0 mm, which consists of a fixed connector with shielded shroud, where a plurality of shielded free cable connectors may be plugged in. The fixed connectors and shroud have 30 contacts or a multiple of this value. The free connectors have 10, 20, or 30 contacts; they may be stacked end to end and fit in all slots of the shroud.

    General Product Information - (Show below) - (Hide below)

    Development Note For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
    Document Type Standard
    Publisher National Standards Authority of Ireland
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
    EN 60917-2-2 : 1996 MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES - SECTIONAL SPECIFICATION - INTERFACE CO-ORDINATION DIMENSIONS FOR THE 25 MM EQUIPMENT PRACTICE - DETAIL SPECIFICATION - DIMENSIONS FOR SUBRACKS, CHASSIS, BACKPLANES, FRONT PANELS AND PLUG-IN UNITS
    EN 60352-2:2006/A1:2013 SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
    EN 61076-4-104 : 1999 CONNECTORS FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4-104: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART MODULAR CONNECTORS, BASIC GRID OF 2.0 MM WITH TERMINATIONS ON A MULTIPLE GRID OF 0.5 MM
    IEC 60512-8:1993 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
    IEC 61076-4-100:2001 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
    IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
    IEC 61076-4-104:1999 Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm
    EN 60068-1:2014 ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE (IEC 60068-1:2013)
    HD 625.1 : 200S1 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PRINCIPLES, REQUIREMENTS AND TESTS
    EN 61076-4:1996 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4: SECTIONAL SPECIFICATION - PRINTED BOARD CONNECTORS
    EN 61076-1:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
    EN 61076-4-100 : 2001 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-100: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES HAVING A GRID OF 2.5 MM FOR PRINTED BOARDS AND BACKPLANES
    IEC 60410:1973 Sampling plans and procedures for inspection by attributes
    EN 60352-5:2012/AC:2014 SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-5:2012)
    ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
    IEC 60352-5:2012 Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
    IEC 61076-4:1995 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors
    EN 60512-23-3 : 2001 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS - PART 23-3: TEST 23C: SHEILDING EFFECTIVENESS OF CONNECTORS AND ACESSORIES
    IEC 60512-4:1976 Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 4: Dynamic stress tests
    IEC 60917-2-2:1994 Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subracks, chassis, backplanes, front panels and plug-in units
    IEC 60512-9:1992 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 9: Miscellaneous tests
    IEC 60352-2:2006+AMD1:2013 CSV Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance
    EN 60352-4:1994/A1:2000 SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
    IEC 60512-23-3:2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    IEC 60512-3:1976 Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective