I.S. EN 61800-7-204:2016
Current
The latest, up-to-date edition.
ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-204: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - PROFILE TYPE 4 SPECIFICATION
Hardcopy , PDF
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
National Foreword
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 General
5 Data types
6 Short description of SERCOS data exchange
7 Drive application functions
9 Status codes of drives
10 Drive classes
11 Identification numbers in numerical order
12 Description of identification numbers
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Defines profile type 4 for power drive systems (PDS). Profile type 4 can be mapped onto different communication network technologies.
| DevelopmentNote |
Supersedes I.S. EN 61491. (10/2009) For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
810
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 61800-7-204:2016 | Identical |
| BS EN 61800-7-204:2016 | Equivalent |
| DIN EN 61800-7-204:2016-11 | Equivalent |
| IEC 60050-351:2013 | International Electrotechnical Vocabulary (IEV) - Part 351: Control technology |
| EN 61158-4-16:2008 | Industrial communication networks - Fieldbus specifications - Part 4-16: Data-link layer protocol specification - Type 16 elements |
| IEC 61800-7-303:2015 | Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies |
| EN 61800-7-303:2016 | Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies |
| IEC 61800-7-1:2015 | Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition |
| EN 61800-7-304:2016 | Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies |
| EN 61800-7-302:2016 | Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies |
| EN 61499-1:2013 | Function blocks - Part 1: Architecture |
| IEC 61800-7-302:2015 | Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies |
| EN 61800-7-202:2016 | Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification |
| IEC 61800-7-304:2015 | Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies |
| IEC TR 62390:2005 | Common automation device - Profile guideline |
| EN 61800-7-201:2016 | Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification |
| IEC TS 61915:2003 | Low-voltage switchgear and controlgear - Principles for the development of device profiles for networked industrial devices |
| IEC 62026-3:2014 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet |
| ISO 15745-1:2003 | Industrial automation systems and integration — Open systems application integration framework — Part 1: Generic reference description |
| EN 50325-4:2002 | Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 4: CANopen |
| EN 61158-4-19:2014 | Industrial communication networks - Fieldbus specifications - Part 4-19: Data-link layer protocol specification - Type 19 elements |
| ISO/IEC 2382-15:1999 | Information technology — Vocabulary — Part 15: Programming languages |
| ISO/IEC 19501:2005 | Information technology — Open Distributed Processing — Unified Modeling Language (UML) Version 1.4.2 |
| EN 62026-3:2015 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet |
| IEC 61800-7-201:2015 | Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification |
| IEC 61800-7-203:2015 | Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification |
| EN 61158-6-16:2008 | Industrial communication networks - Fieldbus specifications - Part 6-16: Application layer protocol specification - Type 16 elements |
| IEC 61499-1:2012 | Function blocks - Part 1: Architecture |
| IEC 61158-4-19:2014 | Industrial communication networks - Fieldbus specifications - Part 4-19: Data-link layer protocol specification - Type 19 elements |
| EN 61800-7-1:2016 | Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition |
| IEC 61800-7-301:2015 | Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies |
| IEC 61800-7-202:2015 | Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification |
| EN 61800-7-203:2016 | Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification |
| EN 61800-7-301:2016 | Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies |
| IEC 61158-4-16:2007 | Industrial communication networks - Fieldbus specifications - Part 4-16: Data-link layer protocol specification - Type 16 elements |
| IEC 61158-6-16:2007 | Industrial communication networks - Fieldbus specifications - Part 6-16: Application layer protocol specification - Type 16 elements |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.