I.S. EN 622-5:2009
Current
The latest, up-to-date edition.
FIBREBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR DRY PROCESS BOARDS (MDF)
Hardcopy , PDF
English
01-01-2009
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General
4.2 Requirements for non load-bearing boards, including boards
for general purpose use
4.2.1 Requirements for boards for use in dry conditions
4.2.2 Requirements for boards for use in humid conditions
4.3 Requirements for load-bearing boards
4.3.1 Requirements for load-bearing boards for use in
dry conditions
4.3.2 Requirements for load-bearing boards for use in
humid conditions
4.4 Requirements for light MDF boards for non load-bearing
applications, including general purpose boards
4.4.1 Requirements for boards for use in dry conditions
4.4.2 Requirements for boards for use in humid conditions
4.5 Requirements for ultra-light MDF boards for non
load-bearing applications, including general purpose boards
4.6 Requirements for boards for use in rigid underlays in
roofing and walls
5 Verification of compliance
5.1 General
5.2 External control
5.3 Factory production control
6 Supplementary properties
7 Marking
7.1 Boards marketed within the European Economic Area
for construction applications
7.2 Other boards
Annex A (normative) Boil test according to EN 1087-1 -
Modified procedure
Bibliography
Describes the requirements for dry process boards (MDF) as defined in EN 316.
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN 622-5 : 2010 | Identical |
| NF EN 622-5 : 2009 | Identical |
| BS EN 622-5:2009 | Identical |
| NEN EN 622-5 : 2009 | Identical |
| UNE-EN 622-5:2010 | Identical |
| SN EN 622-5 : 2009 | Identical |
| DIN EN 622-5:2010-03 | Identical |
| NBN EN 622-5 : 2010 | Identical |
| NS EN 622-5 : 2009 | Identical |
| EN 622-5:2009 | Identical |
| I.S. 440:2009 | TIMBER FRAME DWELLINGS |
| I.C.P. 2:2002 | SLATING AND TILING |
| EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| EN 321:2001 | Wood-based panels - Determination of moisture resistance under cyclic test conditions |
| EN 319:1993 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
| EN 1087-1:1995 | Particleboards - Determination of moisture resistance - Part 1: Boil test |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| ENV 1156:1998 | Wood-based panels - Determination of duration of load and creep factors |
| EN 317:1993 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
| EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
| EN 13446:2002 | Wood-based panels - Determination of withdrawal capacity of fasteners |
| EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
| EN 320:2011 | Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws |
| EN 12369-1:2001 | Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards |
| EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
| EN 335-3:1995 | Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
| EN 382-1:1993 | Fibreboards - Determination of surface absorption - Part 1: Test method for dry process fibreboards |
| EN 622-3:2004 | Fibreboards - Specifications - Part 3: Requirements for medium boards |
| EN 316:2009 | Wood fibre boards - Definition, classification and symbols |
| EN 622-4:2009 | Fibreboards - Specifications - Part 4: Requirements for softboards |
| EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| ENV 12872 : DRAFT 2000 | WOOD-BASED PANELS - GUIDANCE ON THE USE OF LOAD-BEARING BOARDS IN FLOORS, WALLS AND ROOFS |
| EN 622-1:2003 | Fibreboards - Specifications - Part 1: General requirements |
| EN 311:2002 | Wood-based panels - Surface soundness - Test method |
| EN 14964:2006 | Rigid underlays for discontinuous roofing - Definitions and characteristics |
| ISO 3340:1976 | Fibre building boards — Determination of sand content |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.