I.S. EN 62321:2009
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
ELECTROTECHNICAL PRODUCTS - DETERMINATION OF LEVELS OF SIX REGULATED SUBSTANCES (LEAD, MERCURY, CADMIUM, HEXAVALENT CHROMIUM, POLYBROMINATED BIPHENYLS, POLYBROMINATED DIPHENYL ETHERS)
Hardcopy , PDF
31-07-2013
English
09-07-2009
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Test methods - Overview
5 Mechanical sample preparation
6 Screening by X-ray fluorescence spectrometry (XRF)
7 Determination of mercury in polymers, metals and electronics
by CV-AAS, CV-AFS, ICP-OES and ICP-MS
8 Determination of lead and cadmium in polymers by ICP-OES,
ICP-MS and AAS
9 Determination of lead and cadmium in metals by ICP-OES,
ICP-MS and AAS
10 Determination of lead and cadmium in electronics by ICP-OES,
ICP-MS and AAS
Annex A (informative) - Determination of PBB and PBDE in polymers
by GC-MS
Annex B (informative) - Test for the presence of hexavalent
chromium (Cr(VI)) in colourless and
coloured corrosion-protected coatings
on metals
Annex C (Informative) - Determination of hexavalent chromium
(Cr(VI)) in polymers and electronics by
the colorimetric method
Annex D (informative) - Practical application of screening by X-ray
fluorescence spectrometry (XRF)
Annex E (informative) - Practical application of determination of
mercury in polymers, metals and electronics
by CV-AAS, CV-AFS, ICP-OES and ICP-MS
Annex F (informative) - Practical application of determination of
lead and cadmium in polymers by ICP-OES,
ICP-MS and AAS
Annex G (informative) - Practical application of determination of
lead and cadmium in metals by ICP-OES,
ICP-MS and AAS
Annex H (informative) - Practical application of determination of
lead and cadmium in electronics by ICP-OES,
CP-MS and AAS
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Describes the determination of the levels of lead (Pb), mercury (Hg), cadmium (Cd), hexavalent chromium (Cr(VI)) contained in inorganic and organic compounds, and two types of brominated flame retardants, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE) contained in electrotechnical products.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017) 2009 Edition is Partially Superseded by I.S. EN 62321-1, I.S. EN 62321-3-2, I.S. EN 62321-4, I.S. EN 62321-5, I.S. EN 62321-2, I.S. EN 62321-3-1, I.S. EN 62321-6 & I.S. EN 62321-7-2. (01/2018)
|
| DocumentType |
Standard
|
| Pages |
236
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Standards | Relationship |
| IEC 62321:2008 | Identical |
| EN 62321:2009 | Identical |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| EN ISO 17294-1:2006 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004) |
| ISO/IEC Guide 98:1993 | Guide to the expression of uncertainty in measurement (GUM) |
| EN 15205:2006 | Determination of hexavalent chromium in corrosion protection layers - Qualitative analysis |
| EN ISO 5961:1995 | Water quality - Determination of cadmium by atomic absorption spectrometry (ISO 5961:1994) |
| ISO 5961:1994 | Water quality Determination of cadmium by atomic absorption spectrometry |
| IEC TS 62239:2008 | Process management for avionics - Preparation of an electronic components management plan |
| ISO 6101-2:1997 | Rubber Determination of metal content by atomic absorption spectrometry Part 2: Determination of lead content |
| ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
| ASTM E 1622 : 1994 : R1999 : EDT 1 | Standard Practice for Correction of Spectral Line Overlap in Wavelength-Dispersive X-Ray Spectrometry (Withdrawn 2006) |
| ISO 17294-1:2004 | Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 1: General guidelines |
| ASTM E 1172 : 2016 : REDLINE | Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer |
| ISO Guide 30:2015 | Reference materials — Selected terms and definitions |
| EN 13346:2000 | Characterization of sludges - Determination of trace elements and phosphorus - Aqua regia extraction methods |
| ASTM E 1621 : 2013 : REDLINE | Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 3856-4:1984 | Paints and varnishes — Determination of "soluble" metal content — Part 4: Determination of cadmium content — Flame atomic absorption spectrometric method and polarographic method |
| EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
| ISO 247:2006 | Rubber Determination of ash |
| EN 1122:2001 | Plastics - Determination of cadmium - Wet decomposition method |
| EN ISO 3613:2010 | Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2010) |
| ISO 3613:2010 | Metallic and other inorganic coatings Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methods |
| IEC GUIDE 114:2005 | Environmentally conscious design - Integrating environmental aspects into design and development of electrotechnical products |
| IEC 60114:1959 | Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| DIN 50993-1:2005-05 | DETERMINATION OF HEXAVALENT CHROMIUM IN CORROSION PROTECTION COATINGS - PART 1: QUALITATIVE ANALYSIS |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.