I.S. EN 62717:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LED MODULES FOR GENERAL LIGHTING - PERFORMANCE REQUIREMENTS
Hardcopy , PDF
01-05-2019
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Marking
5 Dimensions
6 Test conditions
7 Electrical LED module input
8 Light output
9 Chromaticity coordinates, correlated colour temperature
(CCT) and colour rendering
10 LED module life
11 Verification
12 Information for luminaire design
Z1 - Requirements for directional LED modules
Z2 - Requirements for non-directional LED Modules
Annex A (normative) - Method of measuring LED module
characteristics
Annex B (informative) - Information for luminaire design
Annex C (informative) - Explanation of recommended LED
procuct lifetime metrics
Annex D (normative) - Explanation of the photometric code
Annex E (normative) - Measurement of displacement factor
Annex F (informative) - Explanation of displacement factor
Annex G (informative) - Examples of LED dies and LED
packages
Annex H (informative) - Test equipment for temperature measurement
Annex I (normative) - Use of IES LM-80 for lumen
maintenance, colour rendering index
and maintained chromaticity coordinates data
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Annex ZZA (informative) - Relationship between this
European Standard and the requirements of
Commission Regulation (EC) No 244/2009
Annex ZZB (informative) - Relationship between this
European Standard and the requirements of
Commission Regulation (EU) No 1194/2012
Annex ZZC (informative) - Relationship between this
European Standard and the requirements of
Commission Regulation (EU) No 874/2012
Defines the performance requirements for LED modules, together with the test methods and conditions, required to show compliance with this standard.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (07/2017)
|
| DocumentType |
Standard
|
| Pages |
124
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 62717:2017 | Identical |
| IEC 62707-1:2013 | LED-binning - Part 1: General requirements and white colour grid |
| EN 62031:2008/A2:2015 | LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS (IEC 62031:2008/A2:2014) |
| IEC 61347-2-13:2014+AMD1:2016 CSV | Lamp controlgear - Part 2-13: Particular requirements for d.c. ora.c. supplied electronic controlgear for LED modules |
| IEC TR 61341:2010 | Method of measurement of centre beam intensity and beam angle(s) of reflector lamps |
| EN 61347-2-13:2014/A1:2017 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES |
| IEC PAS 62722-2-1:2011 | Luminaire performance - Part 2-1: Particular requirements for LED luminaires |
| IEC 60050-845:1987 | International Electrotechnical Vocabulary (IEV) - Part 845: Lighting |
| CISPR 15:2013+AMD1:2015 CSV | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
| EN 61000-4-7:2002/A1:2009 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-7: TESTING AND MEASUREMENT TECHNIQUES - GENERAL GUIDE ON HARMONICS AND INTERHARMONICS MEASUREMENTS AND INSTRUMENTATION, FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERETO (IEC 61000-4-7:2002/A1:2008) |
| EN 60068-3-5:2002 | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
| EN 13032-4:2015 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires |
| IEC 62384:2006+AMD1:2009 CSV | DC or AC supplied electronic control gear for LED modules - Performance requirements |
| EN 61341:2011 | Method of measurement of centre beam intensity and beam angle(s) of reflector lamps |
| IEC 60969:2016 | Self-ballasted compact fluorescent lamps for general lighting services - Performance requirements |
| IEC 60068-3-5:2001 | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
| IEC 62504:2014 | General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions |
| IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
| EN 61000-3-2:2014 | Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
| EN 13032-1:2004+A1:2012 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format |
| IEC 61000-4-7:2002+AMD1:2008 CSV | Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto |
| IEC TR 61000-1-7:2016 | Electromagnetic compatibility (EMC) - Part 1-7: General - Power factor in single-phase systems under non-sinusoidal conditions |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| EN 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.