• I.S. EN 81-22:2014

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH

    Available format(s):  Hardcopy, PDF

    Superseded date:  24-09-2021

    Language(s):  English

    Published date:  01-01-2014

    Publisher:  National Standards Authority of Ireland

    For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
    Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

    Dates of withdrawal of national standards are available from NSAI.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    0 Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions, symbols and
      abbreviated terms
    4 List of significant hazards
    5 Safety requirements and/or protective
      measures
    6 Verification of the safety requirements and/or
      protective measures
    7 Information for use
    Annex A (normative) - List of the safety contacts
    Annex B (normative) - Unlocking triangle
    Annex C (informative) - Technical dossier
    Annex D (normative) - Examinations and tests before
            putting into service
    Annex E (informative) - Periodical examinations and
            tests, examinations and tests after an important
            modification or after an accident
    Annex F (normative) - Safety components - Test procedures
            for verification of conformity
    Annex G (informative) - Calculation of the supporting
            structure, the running tracks, the guide rails,
            the vehicle and the safety gear gripping element
    Annex H (normative) - Electronic components- Failure
            exclusion
    Annex I (informative) - Safety circuits
    Annex J (normative) - Pendulum shock tests
    Annex K (informative) - Traction evaluation
    Annex L (normative) - Evaluation of safety factor for
            suspension ropes
    Annex M (informative) - Machinery spaces - Access
    Annex N (informative) - Building interfaces
    Annex O (informative) - Environment: aspects to be considered
            for a risk analysis
    Annex P (informative) - Determination of anti-slip properties
            for floor surfaces
    Annex ZA (informative) - Relationship between this European
             Standard and the Essential Requirements of
             EU Directive 95/16/EC
    Bibliography

    Abstract - (Show below) - (Hide below)

    Defines the safety rules for the construction and installation of permanently installed new electric lifts, with traction or positive drive, serving defined landings levels, having a vehicle designed to convey passengers or passengers and loads, suspended by ropes or chains and travelling in a vertical plan along guide rails that are inclined at an angle of between 15 degrees and 75 degrees in relation to the horizontal.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher National Standards Authority of Ireland
    Status Superseded
    Superseded By

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60112:2003+AMD1:2009 CSV METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
    EN 12015 : 2014 ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - EMISSION
    EN 61508-6 : 2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 6: GUIDELINES ON THE APPLICATION OF IEC 61508-2 AND IEC 61508-3
    EN 12016 : 2013 ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
    ISO/IEC 17065:2012 Conformity assessment Requirements for bodies certifying products, processes and services
    IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
    EN 12929-1 : 2015 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 1: REQUIREMENTS FOR ALL INSTALLATIONS
    ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
    EN 61508-3 : 2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 3: SOFTWARE REQUIREMENTS
    EN 12930 : 2015 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CALCULATIONS
    IEC 60227-4:1992+AMD1:1997 CSV Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring
    EN 50214:2006/corrigendum Dec. 2007 FLAT POLYVINYL CHLORIDE SHEATHED FLEXIBLE CABLES
    EN 61800-5-2 : 2017 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL (IEC 61800-5-2:2016)
    BGR 181 : 2003 FUSSBOEDEN IN ARBEITSRAEUMEN UND ARBEITSBEREICHEN MIT RUTSCHGEFAHR
    EN 61508-1 : 2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS
    HD 21-3 : S3 AMD 2 2008 POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - NON-SHEATHED CABLES FOR FIXED WIRING
    HD 21.5 S3:1994/A2:2001 POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 5: FLEXIBLE CABLES (CORDS)
    HD 214 : 200S2 RECOMMENDED METHOD FOR DETERMINING THE COMPARATIVE TRACKING INDEX OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS
    IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
    IEC 60947-4-1:2009+AMD1:2012 CSV LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
    EN 61508-7 : 2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
    IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
    ISO 7465:2007 Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type
    EN 61558-1:2005/A1:2009 SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
    EN 13796-1 : 2017 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS
    EN 61439-1 : 2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
    IEC 60227-3:1993+AMD1:1997 CSV Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    HD 60364-4-41:2017/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
    HD 60364-5-54:2011/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
    IEC 61508-5:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508)
    IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
    EN 81-77 : 2013 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATIONS OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER AND GOODS PASSENGER LIFTS - PART 77: LIFTS SUBJECT TO SEISMIC CONDITIONS
    IEC 61508-4:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508)
    IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV Low-voltage fuses - Part 1: General requirements
    IEC 61508-3:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508)
    EN 81-1:1998+A3:2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
    IEC 62326-1:2002 Printed boards - Part 1: Generic specification
    EN ISO 13857 : 2008 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS
    CEN/TR 81-10 : 2008 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - BASICS AND INTERPRETATIONS - PART 10: SYSTEM OF THE EN 81 SERIES OF STANDARDS
    ISO 12100:2010 Safety of machinery General principles for design Risk assessment and risk reduction
    HD 22-4 : 200S4 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 4: CORDS AND FLEXIBLE CABLES
    DIN 51130:2014-02 Testing of floor coverings - Determination of the anti-slip property - Workrooms and fields of activities with slip danger - Walking method - Ramp test
    EN 60747-5-5:2011/A1:2015 SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS (IEC 60747-5-5:2007/A1:2013)
    EN 60068-2-27 : 2009 ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK
    IEC 60364-6:2016 Low voltage electrical installations - Part 6: Verification
    EN 61508-2 : 2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS
    IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
    EN 60947-4-1 : 2010 AMD 1 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012)
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    EN 60664-1 : 2007 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
    EN ISO/IEC 17065 : 2012 CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES (ISO/IEC 17065:2012)
    EN 61508-5 : 2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 5: EXAMPLES OF METHODS FOR THE DETERMINATION OF SAFETY INTEGRITY LEVELS
    ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
    EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
    EN ISO 12100 : 2010 SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
    HD 516 S2:1997/A2:2008 GUIDE TO USE OF LOW VOLTAGE HARMONIZED CABLES
    EN 60068-2-6 : 2008 ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
    IEC 61508-6:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508)
    IEC 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    EN 1997-1:2004/A1:2013 EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
    IEC 60747-5-5:2007+AMD1:2013 CSV Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices - Photocouplers
    IEC 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    IEC 61508-7:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508)
    EN 1998-1:2004/A1:2013 EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS
    IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
    EN 62326-1 : 2002 PRINTED BOARDS - PART 1: GENERIC SPECIFICATION
    EN 1991-1-4:2005/A1:2010 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    EN 60068-2-14 : 2009 ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE
    IEC 61508-2:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508)
    HD 21 PT4 : 200S2 POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 4: SHEATHED CABLES FOR FIXED WIRING
    IEC 60227-5:2011 POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 5: FLEXIBLE CABLES (CORDS)
    IEC 61800-5-2:2016 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
    EN 131-2:2010+A2:2017 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
    EN 13015:2001+A1:2008 MAINTENANCE FOR LIFTS AND ESCALATORS - RULES FOR MAINTENANCE INSTRUCTIONS
    EN 60269-1:2007/A2:2014 LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014)
    EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    EN 61508-4 : 2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 4: DEFINITIONS AND ABBREVIATIONS
    CEN/TR 14819-1 : 2004 SAFETY RECOMMENDATIONS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE - PART 1: FUNICULAR RAILWAYS IN TUNNELS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective