I.S. EN 81714-2:2007
Current
The latest, up-to-date edition.
DESIGN OF GRAPHICAL SYMBOLS FOR USE IN THE TECHNICAL DOCUMENTATION OF PRODUCTS - PART 2: SPECIFICATION FOR GRAPHICAL SYMBOLS IN A COMPUTER SENSIBLE FORM, INCLUDING GRAPHICAL SYMBOLS FOR A REFERENCE LIBRARY, AND REQUIREMENTS FOR THEIR INTERCHANGE
Hardcopy , PDF
English
01-01-2007
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
3.1 Graphical symbols for use on documents
3.2 Nodes
3.3 Administration of openings
3.4 Graphical constructs
3.5 Routing and placing of graphical symbols in diagrams
3.6 Administration of graphical symbols
3.7 Text
4 Markers
4.1 Markers for reference points and connect nodes
4.2 Markers for alignment of text
5 Reference symbols
6 Specifications for symbols including symbols for a reference
library
6.1 General
6.2 Variants of graphical symbols
6.3 Scaling
6.4 Module sizes in reference libraries
6.5 Use of layer technique
6.6 Constructs used in the creation of graphical symbols
6.7 Text
6.8 Connect nodes
6.9 Reference point of reference symbols
6.10 Identification of schematic connect nodes
6.11 Routing and placing of symbols
6.12 Identifying block
6.13 Descriptive data block
6.14 Defaulted location of identifying and descriptive block
6.15 Creation of reference symbols not shown in IEC 60617
nor in ISO 14617
6.16 Classification of graphical symbols
6.17 Description of symbols
6.18 Reference symbol identifier
Annex A (informative) Relations to IEC 60617 and ISO 14617
Annex B (informative) Interchange of diagrams and symbol libraries
Annex C (informative) Application reference model
Annex D (informative) Product identification
Annex E (normative) Data types, value formats, recommended lengths,
defaults
Annex F (normative) Requirements concerning lines
Annex G (normative) Requirements concerning text
Annex H (informative) Examples of pattern definitions
Annex I (normative) Library versions - Conformance requirements
Annex J (normative) Requirements concerning global definitions in a
library
Annex K (informative) Data element type specification
Annex ZA (normative) Normative references to international
publications with their corresponding European publications
Bibliography
Defines requirements for graphical symbols to be included in a reference symbol library in a computer sensible form, and requirements for their interchange among computer aided tools.
| DocumentType |
Standard
|
| Pages |
185
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| SN EN 81714-2 : 1998 | Identical |
| IEC 81714-2:2006 | Identical |
| UNE-EN 81714-2:2008 | Identical |
| DIN EN 81714-2:2007-08 | Identical |
| BS EN 81714-2:2007 | Identical |
| NF EN 81714-2 : 2007 | Identical |
| NBN EN 81714-2 : 2007 | Identical |
| EN 81714-2:2007 | Identical |
| ISO 128-40:2001 | Technical drawings General principles of presentation Part 40: Basic conventions for cuts and sections |
| ISO 10303-1:1994 | Industrial automation systems and integration — Product data representation and exchange — Part 1: Overview and fundamental principles |
| EN ISO 128-21:2001 | Technical drawings - General principles of presentation - Part 21: Preparation of lines by CAD systems (ISO 128-21:1997) |
| ISO 639-1:2002 | Codes for the representation of names of languages — Part 1: Alpha-2 code |
| ISO/IEC 10646:2014 | Information technology Universal Coded Character Set (UCS) |
| EN ISO 3098-5:1997 | Technical product documentation - Lettering - Part 5: CAD lettering of the Latin alphabet, numerals and marks (ISO 3098-5:1997) |
| EN 61360-4:2005/corrigendum:2005 | STANDARD DATA ELEMENT TYPES WITH ASSOCIATED CLASSIFICATION SCHEME FOR ELECTRIC COMPONENTS - PART 4: IEC REFERENCE COLLECTION OF STANDARD DATA ELEMENT TYPES AND COMPONENT CLASSES |
| ISO 10303-201:1994 | Industrial automation systems and integration Product data representation and exchange Part 201: Application protocol: Explicit draughting |
| IEC 61966-2-1:1999 | Multimedia systems and equipment - Colour measurement and management - Part 2-1: Colour management - Default RGB colour space - sRGB |
| ISO 128-50:2001 | Technical drawings General principles of presentation Part 50: Basic conventions for representing areas on cuts and sections |
| ISO/IEC 7942-1:1994 | Information technology Computer graphics and image processing Graphical Kernel System (GKS) Part 1: Functional description |
| EN 61286:2002 | Information technology - Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange |
| ISO 6428:1982 | Technical drawings — Requirements for microcopying |
| IEC 61360-4:2005 | Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types and component classes |
| ISO 3098-5:1997 | Technical product documentation — Lettering — Part 5: CAD lettering of the Latin alphabet, numerals and marks |
| EN ISO 81714-1:2010 | Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules (ISO 81714-1:2010) |
| ENV ISO 10303-1 : DRAFT 1995 | INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - OVERVIEW AND FUNDAMENTAL PRINCIPLES |
| EN ISO 3166-1:2014 | Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013) |
| ISO 10303-212:2001 | Industrial automation systems and integration — Product data representation and exchange — Part 212: Application protocol: Electrotechnical design and installation |
| IEC 61082-1:2014 RLV | Preparation of documents used in electrotechnology - Part 1: Rules |
| IEC 61286:2001 | Information technology - Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange |
| IEC 61360-1:2017 | Standard data element types with associated classification scheme - Part 1: Definitions - Principles and methods |
| ISO 81714-1:2010 | Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules |
| ISO/IEC 6523-1:1998 | Information technology — Structure for the identification of organizations and organization parts — Part 1: Identification of organization identification schemes |
| ISO 10303-11:2004 | Industrial automation systems and integration — Product data representation and exchange — Part 11: Description methods: The EXPRESS language reference manual |
| IEC 61346-1:1996 | Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules |
| EN 61346-1:1996 | Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules |
| EN 61666:2010 | Industrial systems, installations and equipment and industrial products - Identification of terminals within a system |
| EN 61966-2-1:2000/A1:2003 | MULTIMEDIA SYSTEMS AND EQUIPMENT - COLOUR MEASUREMENT AND MANAGEMENT - PART 2-1: COLOUR MANAGEMENT - DEFAULT RGB COLOUR SPACE - SRGB |
| EN ISO/IEC 7942-1 : 1995 | INFORMATION TECHNOLOGY - COMPUTER GRAPHICS AMD IMAGE PROCESSING - GRAPHICAL KERNEL SYSTEM (GKS) - PART 1: FUNCTIONAL DESCRIPTION |
| ENV ISO 10303-21 : DRAFT 1995 | INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - IMPLEMENTATION METHODS: CLEAR TEST ENCODING OF THE EXCHANGE STRUCTURE |
| EN 61082-1:2015 | Preparation of documents used in electrotechnology - Part 1: Rules |
| EN 61346-2:2000 | Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 2: Classification of objects and codes for classes |
| ISO 3098-0:1997 | Technical product documentation Lettering Part 0: General requirements |
| ISO/IEC 646:1991 | Information technology ISO 7-bit coded character set for information interchange |
| ISO 128-20:1996 | Technical drawings General principles of presentation Part 20: Basic conventions for lines |
| ISO 10303-21:2002 | Industrial automation systems and integration Product data representation and exchange Part 21: Implementation methods: Clear text encoding of the exchange structure |
| ISO 128-21:1997 | Technical drawings General principles of presentation Part 21: Preparation of lines by CAD systems |
| ISO 3166-1:2013 | Codes for the representation of names of countries and their subdivisions Part 1: Country codes |
| EN ISO 3098-0:1997 | Technical product documentation - Lettering - Part 0: General requirements (ISO 3098-0:1997) |
| EN ISO 128-20:2001 | Technical drawings - General principles of presentation - Part 20: Basic conventions for lines (ISO 128-20:1996) |
| IEC 61666:2010 | Industrial systems, installations and equipment and industrial products - Identification of terminals within a system |
| IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
| ISO 13584-26:2000 | Industrial automation systems and integration — Parts library — Part 26: Logical resource: Information supplier identification |
| IEC 61346-2:2000 | Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 2: Classification of objects and codes for classes |
| ENV ISO 10303-201 : DRAFT 1995 | INDUSTRIAL SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - APPLICATION PROTOCOL: EXPLICIT DRAUGHTING |
| ENV ISO 10303-11 : DRAFT 1995 | INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - DESCRIPTION METHODS: THE EXPRESS LANGUAGE REFERENCE MANUAL |
| ISO/IEC 9592-1:1997 | Information technology Computer graphics and image processing Programmer's Hierarchical Interactive Graphics System (PHIGS) Part 1: Functional description |
| EN ISO 6428:1999 | Technical drawings - Requirements for microcopying (ISO 6428:1982) |
| IEC 81714-3:2004 | Design of graphical symbols for use in the technical documentation of products - Part 3: Classification of connect nodes, networks and their encoding |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.