I.S. EN ISO 15614-5:2004
Current
The latest, up-to-date edition.
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 5: ARC WELDING OF TITANIUM, ZIRCONIUM AND THEIR ALLOYS
Hardcopy , PDF
English
01-01-2004
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Preliminary welding procedure specification (pWPS)
5 Welding procedure test
6 Test piece
6.1 General
6.2 Shape and dimensions of test pieces
6.2.1 General
6.2.2 Butt joint in plate with full penetration
6.2.3 Butt joint in pipe with full penetration
6.2.4 T-joint
6.2.5 Branch connection
6.3 Welding of test pieces
7 Examination and testing
7.1 Extent of testing
7.2 Location and taking of test specimens
7.3 Non-destructive testing
7.4 Destructive testing
7.4.1 General
7.4.2 Transverse tensile test
7.4.3 Bend test
7.4.4 Macro/micro-examination
7.5 Acceptance level
7.6 Coloration
7.7 Re-testing
8 Range of qualification
8.1 General
8.2 Related to the manufacturer
8.3 Related to the parent material
8.3.1 Parent material grouping
8.3.2 Material thickness and pipe diameter
8.3.3 Angle of branch connection
8.4 Common to all welding procedures
8.4.1 Welding process
8.4.2 Welding positions
8.4.3 Type of joint/weld
8.4.4 Filler material, designation
8.4.5 Type of current
8.4.6 Interpass temperature
8.4.7 Post-weld heat treatment
8.4.8 Backing gas
8.5 Specific to processes
8.5.1 Process 131
8.5.2 Process 141
8.5.3 Process 15
9 Welding procedure qualification record (WPQR)
Annex A (informative) Welding Procedure Qualification
Record form (WPQR)
Record of weld test
Test results
Annex ZA (informative) Corresponding International and
European Standards for which equivalents are
not given in the text
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 97/23/EC
Specifies conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of variables listed in clause 8.
| DocumentType |
Standard
|
| Pages |
56
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN ISO 15614-5:2004 | Identical |
| UNE-EN ISO 15614-5:2005 | Identical |
| BS EN ISO 15614-5:2004 | Identical |
| NS EN ISO 15614-5 : 1ED 2004 | Identical |
| UNI EN ISO 15614-5 : 2005 | Identical |
| SN EN ISO 15614-5 : 2004 | Identical |
| ISO 15614-5:2004 | Identical |
| NF EN ISO 15614-5 : 2004 | Identical |
| NBN EN ISO 15614-5 : 2004 | Identical |
| NEN EN ISO 15614-5 : 2004 | Identical |
| ONORM EN ISO 15614-5 : 2004 | Identical |
| DIN EN ISO 15614-5:2004-07 | Identical |
| I.S. 328:2015/AC1:2015 | GAS TRANSMISSION PIPELINES AND PIPELINE INSTALLATIONS (EDITION 4) |
| I.S. 328:2015 | GAS TRANSMISSION PIPELINES AND PIPELINE INSTALLATIONS (EDITION 4) |
| EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
| EN 439 : 1994 | WELDING CONSUMABLES - SHIELDING GASES FOR ARC WELDING AND CUTTING |
| EN 1321:1996 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
| CR ISO 15608 : 2000 | WELDING - GUIDELINES FOR A METALLIC MATERIAL GROUPING SYSTEM |
| EN ISO 6947:2011 | Welding and allied processes - Welding positions (ISO 6947:2011) |
| EN 895:1995 | Destructive tests on welds in metallic materials - Transverse tensile test |
| EN 910 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS |
| EN ISO 9606-5:2000 | Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000) |
| EN 571-1:1997 | Non destructive testing - Penetrant testing - Part 1: General principles |
| EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
| EN 970:1997 | Non-destructive examination of fusion welds - Visual examination |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.