ISO 19840:2012
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces |
ISO 14917:2017
|
Thermal spraying — Terminology, classification |
ISO 8502-3:2017
|
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
ISO 8502-4:2017
|
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application |
ISO 8501-1:2007
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
ISO 12944-6:1998
|
Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods |
ISO 12679:2011
|
Thermal spraying Recommendations for thermal spraying |
ISO 14232:2000
|
Thermal spraying Powders Composition and technical supply conditions |
EN 1395-3:2007
|
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying |
ISO 14713-1:2017
|
Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance |
ISO 8503-2:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
ISO 12944-5:2007
|
Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
EN 1395-1:2007
|
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 1: General requirements |
ISO 17834:2003
|
Thermal spraying Coatings for protection against corrosion and oxidation at elevated temperatures |
CEN/TR 15339-5:2014
|
Thermal spraying - Safety requirements for thermal spraying equipment - Part 5: Powder and wire feed units |
ISO 11126-4:1993
|
Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 4: Coal furnace slag |
ISO 8503-3:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Focusing microscope procedure |
ISO 1463:2003
|
Metallic and oxide coatings Measurement of coating thickness Microscopical method |
CEN/TR 15339-4:2014
|
Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply |
ISO 8501-3:2006
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
ISO 14918:1998
|
Thermal spraying Approval testing of thermal sprayers |
CEN/TR 15339-1:2014
|
Thermal spraying - Safety requirements for thermal spraying equipment - Part 1: General requirements |
EN 15339-2:2007
|
Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
EN 15520:2007
|
Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings |
ASTM D 610 : 2008
|
Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces |
ISO 11126-10:2017
|
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 10: Almandite garnet |
ISO 14916:2017
|
Thermal spraying — Determination of tensile adhesive strength |
ISO 4624:2016
|
Paints and varnishes — Pull-off test for adhesion |
ISO 12944-2:2017
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
ISO 12944-1:2017
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
EN 1395-6:2007
|
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems |
ISO 8044:2015
|
Corrosion of metals and alloys Basic terms and definitions |
ISO 11126-3:1993
|
Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 3: Copper refinery slag |
EN 1395-7:2007
|
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed systems |
ISO 11124-2:1993
|
Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 2: Chilled-iron grit |
ISO 12944-4:2017
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
ISO 14923:2003
|
Thermal spraying Characterization and testing of thermally sprayed coatings |
ISO 8501-2:1994
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings |
ISO 2178:2016
|
Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
ISO 12944-3:2017
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations |
ISO 12690:2010
|
Metallic and other inorganic coatings Thermal spray coordination Tasks and responsibilities |
ISO 8503-1:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
EN 13507:2010
|
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
ISO 12671:2012
|
Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings |
ISO 8503-4:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure |
ISO 14922-1:1999
|
Thermal spraying Quality requirements of thermally sprayed structures Part 1: Guidance for selection and use |
ISO 2063-1:2017
|
Thermal spraying Zinc, aluminium and their alloys Part 1: Design considerations and quality requirements for corrosion protection systems |
ISO 14919:2015
|
Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions |
EN 15648:2009
|
Thermal spraying - Component related procedure qualification |
CEN/TR 15339-6:2014
|
Thermal spraying - Safety requirements for thermal spraying equipment - Part 6: Spray booth, Handling system, Dust collection, Exhaust system, Filter |
CEN/TR 15339-3:2014
|
Thermal spraying - Safety requirements for thermal spraying equipment - Part 3: Torches for thermal spraying and their connection and supply units |
ISO 2064:1996
|
Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
EN 1395-2:2007
|
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2: Flame spraying including HVOF |
ISO 12944-7:2017
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work |
ISO 8503-5:2017
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile |