I.S. EN ISO 52000-1:2017
Current
The latest, up-to-date edition.
ENERGY PERFORMANCE OF BUILDINGS - OVERARCHING EPB ASSESSMENT - PART 1 - GENERAL FRAMEWORK AND PROCEDURES (ISO 52000-1:2017)
Hardcopy , PDF
English
13-08-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National foreword
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols, subscripts and abbreviations
5 Description of the overarching framework and procedures
6 Overarching preparation steps
7 Calculated energy performance of buildings
8 Measured overall energy performance and comparison
with calculations
9 Overall assessment of the energy performance of buildings
10 Zoning
11 Calculation of the energy performance, routing and
energy balance
12 Common overarching output
Annex A (normative) - Input and method selection data sheet
- Template
Annex B (informative) - Input and method selection data
sheet - Default choices
Annex C (normative) - Common subscripts
Annex D (informative) - Calculation of measured energy
performance
Annex E (normative) - Calculation methods for energy
performance indicators per part of a building
and/or service
Annex F (informative) - Alphabetical index of terms
Annex G (informative) - Electrical grid related indicators
Annex H (informative) - Proposal of indicators for the
assessment of nearly Zero-Energy Buildings (NZEB)
Bibliography
Gives a systematic, comprehensive and modular structure for assessing the energy performance of new and existing buildings (EPB) in a holistic way.
| Committee |
TC 371
|
| DevelopmentNote |
Supersedes I.S. EN 15603. (12/2017)
|
| DocumentType |
Standard
|
| Pages |
150
|
| ProductNote |
The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document.
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN ISO 52000-1:2017 | Identical |
| ISO 52000-1:2017 | Identical |
| ISO 13789:2017 | Thermal performance of buildings — Transmission and ventilation heat transfer coefficients — Calculation method |
| ISO/IEC 17000:2004 | Conformity assessment Vocabulary and general principles |
| CEN/TS 16629:2014 | Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards |
| EN 15193-1:2017 | Energy performance of buildings - Energy requirements for lighting - Part 1: Specifications, Module M9 |
| EN 15603:2008 | Energy performance of buildings - Overall energy use and definition of energy ratings |
| ISO 10211:2017 | Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations |
| EN 15316-3:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 3: Space distribution systems (DHW, heating and cooling), Module M3-6, M4-6, M8-6 |
| CEN/TS 16628:2014 | Energy Performance of Buildings - Basic Principles for the set of EPB standards |
| ISO 12631:2017 | Thermal performance of curtain walling — Calculation of thermal transmittance |
| EN 16798-13:2017 | Energy performance of buildings - Ventilation for buildings - Part 13: Calculation of cooling systems (Module M4-8) - Generation |
| ISO 16346:2013 | Energy performance of buildings Assessment of overall energy performance |
| ISO 9488:1999 | Solar energy Vocabulary |
| EN 16798-9:2017 | Energy performance of buildings - Ventilation for buildings - Part 9: Calculation methods for energy requirements of cooling systems (Modules M4-1, M4-4, M4-9) - General |
| EN 15316-4-4:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-4: Heat generation systems, building-integrated cogeneration systems, Module M8-3-4, M8-8-4, M8-11-4 |
| ISO/TR 16344:2012 | Energy performance of buildings Common terms, definitions and symbols for the overall energy performance rating and certification |
| EN 15459-1:2017 | Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 1: Calculation procedures, Module M1-14 |
| EN 15316-1:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4 |
| EN 16798-15:2017 | Energy performance of buildings - Ventilation for buildings - Part 15: Calculation of cooling systems (Module M4-7) - Storage |
| ISO 10077-2:2017 | Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 2: Numerical method for frames |
| EN 15378-3:2017 | Energy performance of buildings - Heating and DHW systems in buildings - Part 3: Measured energy performance, Module M3-10, M8-10 |
| PREN 12831-3 : DRAFT 2014 | HEATING SYSTEMS AND WATER BASED COOLING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 3: DOMESTIC HOT WATER SYSTEMS HEAT LOAD AND CHARACTERISATION OF NEEDS |
| EN 15316-4-3:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-3: Heat generation systems, thermal solar and photovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3 |
| EN 16946-1:2017 | Energy Performance of Buildings - Inspection of Automation, Controls and Technical Building Management - Part 1: Module M10-11 |
| PREN 16798-5-2 : DRAFT 2015 | ENERGY PERFORMANCE OF BUILDINGS - MODULES M5-6, M5-8 - VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY REQUIREMENTS OF VENTILATION SYSTEMS - PART 5-2: DISTRIBUTION AND GENERATION (REVISION OF EN 15241) - METHOD 2 |
| EN 15316-2:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 2: Space emission systems (heating and cooling), Module M3-5, M4-5 |
| PREN 16798-3 : DRAFT 2014 | ENERGY PERFORMANCE OF BUILDINGS - PART 3: VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS |
| EN 16798-17:2017 | Energy performance of buildings - Ventilation for buildings - Part 17: Guidelines for inspection of ventilation and air conditioning systems (Module M4-11, M5-11, M6-11, M7-11) |
| ISO 13786:2017 | Thermal performance of building components — Dynamic thermal characteristics — Calculation methods |
| EN 15316-5:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5: Space heating and DHW storage systems (not cooling), Module M3-7, M8-7 |
| ISO 13370:2017 | Thermal performance of buildings — Heat transfer via the ground — Calculation methods |
| ISO 13612-2:2014 | Heating and cooling systems in buildings — Method for calculation of the system performance and system design for heat pump systems — Part 2: Energy calculation |
| ISO/TR 52000-2:2017 | Energy performance of buildings Overarching EPB assessment Part 2: Explanation and justification of ISO 52000-1 |
| ISO 13675:2013 | Heating systems in buildings — Method and design for calculation of the system energy performance — Combustion systems (boilers) |
| EN 15316-4-8:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-8: Space heating generation systems, air heating and overhead radiant heating systems, including stoves (local), Module M3-8-8 |
| EN 16947-1:2017 | Energy Performance of Buildings - Building Management System - Part 1: Module M10-12 |
| ISO 6946:2017 | Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
| ISO 10077-1:2017 | Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 1: General |
| EN 16798-7:2017 | Energy performance of buildings - Ventilation for buildings - Part 7: Calculation methods for the determination of air flow rates in buildings including infiltration (Modules M5-5) |
| EN 16798-5-1:2017 | Energy performance of buildings - Ventilation for buildings - Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distribution and generation |
| PREN 16798-1 : DRAFT 2015 | ENERGY PERFORMANCE OF BUILDINGS - PART 1: INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS - MODULE M1-6 |
| EN 15378-1:2017 | Energy performance of buildings - Heating systems and DHW in buildings - Part 1: Inspection of boilers, heating systems and DHW, Module M3-11, M8-11 |
| EN 15232-1:2017 | Energy Performance of Buildings - Energy performance of buildings - Part 1: Impact of Building Automation, Controls and Building Management - Modules M10-4,5,6,7,8,9,10 |
| EN 15316-4-10:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-10: Wind power generation systems, Module M11-8-7 |
| EN 15316-4-1:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating and DHW generation systems, combustion systems (boilers, biomass), Module M3-8-1, M8-8-1 |
| ISO 7345:1987 | Thermal insulation Physical quantities and definitions |
| PREN 12831-1 : DRAFT 2014 | HEATING SYSTEMS AND WATER BASED COOLING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD |
| EN 15316-4-5:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5 |
| ISO 14683:2017 | Thermal bridges in building construction — Linear thermal transmittance — Simplified methods and default values |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.