I.S. EN ISO 9606-1:2017
Current
The latest, up-to-date edition.
QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS (ISO 9606-1:2012 INCLUDING COR 1:2012 AND COR 2:2013)
Hardcopy , PDF
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
National Foreword
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Reference numbers, symbols and
abbreviated terms
5 Essential variables and range of
qualification
6 Examination and testing
7 Acceptance requirements for test pieces
8 Re-tests
9 Period of validity
10 Welder's qualification test certificate
11 Designation
Annex A (informative) - Welder's qualification
test certificate
Annex B (informative) - Job knowledge
Annex C (informative) - FW/BW test assembly option
Bibliography
Annex ZA (informative) - Relationship between this
European Standard and the essential requirements
of EU Directive 2014/68/EU [2014 OJ L 189] (PED)
aimed to be covered
Annex ZB (informative) - Relationship between this
European Standard and the Essential Requirements
of EU Directive 2014/29/EU (SPVD) [2014 OJ L96]
Describes the requirements for qualification testing of welders for fusion welding of steels.
| DevelopmentNote |
Supersedes I.S. EN 287-1. (10/2013)
|
| DocumentType |
Standard
|
| Pages |
54
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN ISO 9606-1:2017 | Identical |
| ISO 9606-1:2012 | Identical |
| I.S. 328:2015/AC1:2015 | GAS TRANSMISSION PIPELINES AND PIPELINE INSTALLATIONS (EDITION 4) |
| I.S. 329:2015 | GAS DISTRIBUTION MAINS (EDITION 3) |
| I.S. 328:2015 | GAS TRANSMISSION PIPELINES AND PIPELINE INSTALLATIONS (EDITION 4) |
| ISO 14341:2010 | Welding consumables — Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels — Classification |
| ISO 26304:2011 | Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels — Classification |
| ISO 3581:2016 | Welding consumables — Covered electrodes for manual metal arc welding of stainless and heat-resisting steels — Classification |
| ISO 14343:2017 | Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels — Classification |
| ISO 24598:2012 | Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels — Classification |
| ISO 17633:2010 | Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification |
| ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
| ISO 14732:2013 | Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| ISO/TR 15608:2017 | Welding — Guidelines for a metallic materials grouping system |
| ISO 2560:2009 | Welding consumables — Covered electrodes for manual metal arc welding of non-alloy and fine grain steels — Classification |
| ISO 18276:2017 | Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification |
| ISO 9017:2001 | Destructive tests on welds in metallic materials — Fracture test |
| ISO 3580:2017 | Welding consumables — Covered electrodes for manual metal arc welding of creep-resisting steels — Classification |
| ISO 5173:2009 | Destructive tests on welds in metallic materials — Bend tests |
| ISO 18274:2010 | Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification |
| ISO 17640:2017 | Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 21952:2012 | Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels — Classification |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 1: Arc welding |
| ISO 14171:2016 | Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels — Classification |
| ISO 14172:2015 | Welding consumables — Covered electrodes for manual metal arc welding of nickel and nickel alloys — Classification |
| ISO 16834:2012 | Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels — Classification |
| ISO/TR 25901:2007 | Welding and related processes — Vocabulary |
| ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials — Part 2: Comprehensive quality requirements |
| ISO 857-1:1998 | Welding and allied processes — Vocabulary — Part 1: Metal welding processes |
| ISO 17639:2003 | Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds |
| ISO 17632:2015 | Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels — Classification |
| ISO 17634:2015 | Welding consumables — Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels — Classification |
| ISO 17637:2016 | Non-destructive testing of welds — Visual testing of fusion-welded joints |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 15609-2:2001 | Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 2: Gas welding |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials — General rules |
| ISO 636:2017 | Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification |
| ISO 18275:2011 | Welding consumables — Covered electrodes for manual metal arc welding of high-strength steels — Classification |
| ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials — Part 3: Standard quality requirements |
| ISO 6947:2011 | Welding and allied processes — Welding positions |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.