I.S. ENV 14232:2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ADVANCED TECHNICAL CERAMICS - TERMS, DEFINITIONS AND ABBREVIATIONS
Hardcopy , PDF
17-11-2009
English
01-01-2003
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
1 Scope
2 Terms and definitions
2.1 General terms
2.2 Terms for form and processing
2.3 Terms for properties and testing
3 Abbreviations
3.1 Abbreviations for ceramic materials
3.2 Abbreviations for processes
Bibliography - English
Bibliography - French
Bibliography - German
English alphabetical index of terms
English alphabetical index of abbreviations
French alphabetical index of terms
French alphabetical index of abbreviations
German alphabetical index of terms
German alphabetical index of abbreviations
Specifies a list of terms and associated definitions which are typically used for advanced technical ceramic materials, products, applications, properties and processes.
DocumentType |
Standard
|
Pages |
108
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
ENV 14232 : DRAFT 2003 | Identical |
ENV 1159-2 : 1993 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - THERMOPHYSICAL PROPERTIES - DETERMINATION OF THERMAL DIFFUSIVITY |
ENV 1894 : 1996 | |
ENV 12789 : 1998 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER AIR AT ATMOSPHERE PRESSURE - DETERMINATION OF FLEXURAL STRENGTH |
ENV 12291 : 1996 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERE PRESSURE - DETERMINATION OF COMPRESSION PROPERTIES |
EN 843-1:2006 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength |
ENV 12290 : DRAFT 1996 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF COMPRESSION PROPERTIES |
ENV 623-4 : 1993 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GENERAL AND TEXTURAL PROPERTIES - DETERMINATION OF SURFACE ROUGHNESS |
ENV 658-2 : 1993 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - DETERMINATION OF COMPRESSIVE STRENGTH |
ENV 658-4 : DRAFT 1993 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - DETERMINATION OF SHEAR STRENGTH BY COMPRESSION LOADING OF NOTCHED SPECIMENS |
ENV 1007-2 : 1993 | ADVANCED TECHNICAL CERAMICS - CERAMICS COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - DETERMINATION OF LINEAR DENSITY |
ENV 821-3 : 1993 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - THERMO-PHYSICAL PROPERTIES - DETERMINATION OF SPECIFIC HEAT CAPACITY |
ENV 843-5 : 1996 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - MECHANICAL TESTS AT ROOM TEMPERATURE - STATISTICAL ANALYSIS |
ENV 1007-4 : 1994 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - DETERMINATION OF TENSILE PROPERTIES OF FILAMENT AT AMBIENT TEMPERATURE |
ENV 1007-5 : 1998 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - DETERMINATION OF DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT AMBIENT TEMPERATURE |
EN 821-1:1995 | Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 1: Determination of thermal expansion |
ENV 820-1 : DRAFT 1993 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - DETERMINATION OF FLEXURAL STRENGTH AT ELEVATED TEMPERATURES |
EN 658-1:1998 | Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties |
ENV 1071-1 : 1993 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - DETERMINATION OF COATING THICKNESS BY CONTACT PROBE PROFILOMETER |
ENV 1006 : DRAFT 2003 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES |
ENV 1007-3 : 1993 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - DETERMINATION OF FILAMENT DIAMETER |
ENV 12923-1 : 1997 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GENERAL PRACTICE FOR UNDERTAKING CORROSION TESTS |
EN 623-1:2006 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 1: Determination of the presence of defects by dye penetration |
ENV 1892 : 1996 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF TENSILE PROPERTIES |
ENV 725-4 : 1994 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - DETERMINATION OF OXYGEN CONTENT IN ALUMINIUM NITRIDE BY XRF ANALYSIS |
ENV 658-3 : 1992 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - DETERMINATION OF FLEXURAL STRENGTH |
EN 725-1:2007 | Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina |
ENV 1159-1 : 1993 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOUNDS - THERMOPHYSICAL PROPERTIES - DETERMINATION OF THERMAL EXPANSION |
ENV 12788 : 1998 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF FLEXURAL STRENGTH |
ENV 1071-2 : 1993 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - DETERMINATION OF COATING THICKNESS BY THE CAP GRINDING METHOD |
EN 725-8:2006 | Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density |
EN 725-9:2006 | Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density |
ENV 820-2 : 1992 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - DETERMINATION OF SELFLOADED DEFORMATION |
EN 623-2:1993 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 2: Determination of density and porosity |
EN 821-2:1997 | Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method |
ENV 843-2 : 1995 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - MECHANICAL PROPERTIES AT ROOM TEMPERATURE - DETERMINATION OF ELASTIC MODULI |
EN 623-3:2001 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the Linear Intercept Method) |
ENV 658-5 : 1993 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - DETERMINATION OF SHEAR STRENGTH BY SHORT SPAN BEND TEST (THREE POINT) |
ENV 843-3 : DRAFT 1996 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - MECHANICAL PROPERTIES AT ROOM TEMPERATURE - DETERMINATION OF SUBCRITICAL CRACK GROWTH PARAMETERS FROM CONSTANT STRESSING RATE FLEXURAL STRENGTH TESTS |
ENV 658-6 : DRAFT 1993 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - DETERMINATION OF SHEAR STRENGTH BY DOUBLE PUNCH SHEARING |
ENV 1159-3 : 1995 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES, THERMOPHYSICAL PROPERTIES - DETERMINATION OF SPECIFIC HEAT CAPACITY |
ENV 1893 : 1996 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF TENSILE PROPERTIES |
EN 725-7 : 1995 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 7: DETERMINATION OF THE ABSOLUTE DENSITY |
EN 725-10:2007 | Advanced technical ceramics - Methods of test for ceramic powders - Part 10: Determination of compaction properties |
ENV 820-3 : DRAFT 93 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - DETERMINATION OF RESISTANCE TO THERMAL SHOCK BY WATER QUENCHING |
EN 725-6 : 1996 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 6: DETERMINATION OF THE SPECIFIC SURFACE AREA |
ENV 1389 : DRAFT 1994 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - PHYSICAL PROPERTIES - DETERMINATION OF DENSITY AND APPARENT POROSITY |
ENV 12212 : DRAFT 1995 | ADVANCED TECHNICAL CERAMICS - UNIFIED METHOD FOR CLASSIFICATION |
ENV 1071-5 : DRAFT 1995 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 5: DETERMINATION OF POROSITY |
ENV 12289 : DRAFT 1996 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT AMBIENT TEMPERATURE - DETERMINATION OF IN-PLANE SHEAR PROPERTIES |
ENV 843-4 : DRAFT 1994 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - MECHANICAL PROPERTIES AT ROOM TEMPERATURE - VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS TESTS |
EN 725-3:2007 | Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas |
ENV 725-11 : 1993 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - DETERMINATION OF THE DENSIFICATION ON NATURAL SINTERING |
ENV 1007-1 : 1993 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - DETERMINATION OF SIZE CO |
ENV 725-2 : 1994 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - DETERMINATION OF IMPURITIES IN BARIUM TITANATE |
ENV 1071-4 : 1995 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - DETERMINATION OF CHEMICAL COMPOSITION |
ENV 623-3 : 1993 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GENERAL AND TEXTURAL PROPERTIES - DETERMINATION OF GRAIN SIZE |
ENV 1071-3 : DRAFT 1994 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 3: DETERMINATION OF ADHESION BY A SCRATCH TEST |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.