• There are no items in your cart

IEC 60034-3:2007

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

31-12-2021

Language(s)

English - French, Spanish, Castilian

Published date

27-11-2007

FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General
  4.1 General rules
  4.2 Rated conditions
  4.3 Rated voltage
  4.4 Power factor
  4.5 Rated speed
  4.6 Ranges of voltage and frequency
  4.7 Direction of rotation
  4.8 Stator winding
  4.9 Generator rated field current and voltage
  4.10 Winding insulation
       4.10.1 Thermal class
       4.10.2 Withstand voltage tests
  4.11 Insulation against shaft current
  4.12 Over-speed test
  4.13 Critical speeds
  4.14 P-Q capability diagram
  4.15 Overcurrent requirements
  4.16 Sudden short circuit
  4.17 Short-circuit ratio
  4.18 Direct axis transient and subtransient reactances for
       generators
  4.19 Tolerances on short-circuit ratio and direct axis
       transient and subtransient reactances
  4.20 Mechanical conditions for rotors
       4.20.1 Number of starts
       4.20.2 Turning gear operation
  4.21 Coolers
5 Air-cooled generators
  5.1 General
  5.2 Generator cooling
  5.3 Temperature of primary coolant
       5.3.1 Temperature detectors
6 Hydrogen-cooled or liquid-cooled generators
  6.1 General
  6.2 Hydrogen pressure and purity in the casing
  6.3 Generator housing and cover plates
  6.4 Stator winding terminals
  6.5 Temperature of primary coolants, temperatures and
       temperature rises of the generator
  6.6 Temperature detectors
  6.7 Auxiliary system
7 Generators for combustion gas turbines or combined
  cycle applications
  7.1 General
  7.2 Service conditions
       7.2.1 General
       7.2.2 Primary coolant temperature
       7.2.3 Number of starts
       7.2.4 Application of load
  7.3 Rated output
  7.4 Capabilities
       7.4.1 General
       7.4.2 Base capability
       7.4.3 Temperature rise and temperature at base
              capability
       7.4.4 Peak capability
  7.5 Rating plate
  7.6 Temperature tests
Annex A (normative) Precautions to be taken when using
        hydrogen cooled turbine-driven synchronous
        generators
Bibliography

Applies to three-phase synchronous generators, having rated outputs of 10 MVA and above driven by steam turbines or combustion gas turbines. Provides common requirements as well as specific requirements for air, hydrogen or liquid cooled synchronous generators and supplements the basic requirements given in IEC 60034-1. Gives also the precautions to be taken when using hydrogen cooled generators. The scope of this new edition has been limited with respect to the previous edition.

Committee
TC 2
DevelopmentNote
Supersedes IEC 60842. (04/2006) Stability date: 2017. (09/2017)
DocumentType
Standard
Pages
54
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy
Supersedes

IEEE C50.13 : 2014 CYLINDRICAL-ROTOR 50 HZ AND 60 HZ, SYNCHRONOUS GENERATORS RATED 10 MVA AND ABOVE
14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
CEI EN 60034-1 : 2015 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
(INACTIVE RECORD)IEEE C50.12 : 2005 SALIENT-POLE 50 HZ AND 60 HZ SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS RATED 5 MVA AND ABOVE
IEEE DRAFT C50.12 : D10 2004 SALIENT-POLE 50 AND 60 HZ SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS RATED 5 MVA AND ABOVE
IEC 61936-1:2010+AMD1:2014 CSV Power installations exceeding 1 kV a.c. - Part 1: Common rules
ISO 19859:2016 Gas turbine applications Requirements for power generation
VDI/VDE 3524 Blatt 3:2012-09 (Draft) Modelling and simulation of power plants - Electrical Systems
15/30256504 DC : 0 BS EN 60034-23 ED 1.0 - ROTATING ELECTRICAL MACHINES - PART 23: REPAIR, OVERHAUL AND RECLAMATION
UNE-EN 60034-1:2011 Rotating electrical machines - Part 1: Rating and performance
BS EN 60034-1:2010 Rotating electrical machines Rating and performance
IEEE DRAFT C37.102 : D8 2006 AC GENERATOR PROTECTION
KTA 2103 : 2015 COR 2017 EXPLOSION PROTECTION IN NUCLEAR POWER PLANTS WITH LIGHT WATER REACTORS (GENERAL AND CASE-SPECIFIC REQUIREMENTS)
IEEE C37.102-2006 REDLINE IEEE Guide for AC Generator Protection
EN 61936-1 : 2010 AMD 1 2014 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014)
IEC TS 60034-23:2003 Rotating electrical machines - Part 23: Specification for the refurbishing of rotating electrical machines
BIS IS/IEC 60034-1 : 2004 AMD 1 2015 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
01/202922 DC : DRAFT APR 2001 IEC 60034-23 ED.1 - ROTATING ELECTRICAL MACHINES - PART 23: SPECIFICATION FOR THE REFURBISHING OF ROTATING ELECTRICAL MACHINES
IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
I.S. EN 61936-1:2010 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
BS EN 61936-1 : 2010 POWER INSTALLATIONS EXCEEDING 1 KV A.C - PART 1: COMMON RULES
UNE-EN 61936-1:2012 Power installations exceeding 1 kV a.c. -- Part 1: Common rules
08/30182672 DC : DRAFT MAY 2008 BS EN 60034-1 - ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
I.S. EN 60034-1:2010 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
NF EN 60034-1 : 2011 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
EN 60034-1:2010/corrigendum Oct. 2010 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE

IEC 60045-1:1991 Steam turbines - Part 1: Specifications
IEC 60034-8:2007+AMD1:2014 CSV Rotating electrical machines - Part 8: Terminal markings anddirection of rotation
IEC 60034-4:2008 Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests
IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance

View more information
€194.44
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.