Skip to content
Please enter a keyword to search

  • IEC 60068-2-11:1981

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  12-09-2022

    Language(s): 

    Published date:  01-01-1981

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    PREFACE
    1 Scope
    2 General
    3 Test apparatus
    4 Salt mist
    5 Initial measurements
    6 Pre-conditioning
    7 Conditioning
    8 Recovery
    9 Final measurements
    10 Test reports
    11 Information to be given in the relevant specification

    Abstract - (Show below) - (Hide below)

    IEC 60068-2-11:1981 Compares resistance to deterioration from salt mist between specimens of similar construction. May be used to evaluate the quality and the uniformity of protective coatings. The contents of the corrigendum of December 1999 have been included in this copy.

    General Product Information - (Show below) - (Hide below)

    Development Note Also numbered as BS EN 60068-2.11. (09/2005) Stability Date: 2017. (10/2012)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 60780-323:2017 Nuclear facilities. Electrical equipment important to safety. Qualification
    BS 7400(1991) : 1991 AMD 7672 SPECIFICATION FOR ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
    ISO 15003:2006 Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions
    CEI EN 60749-13 : 2004 SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 13: SALT ATMOSPHERE
    BS EN 61869-1:2009 Instrument transformers General requirements
    04/300071 DC : DRAFT JAN 2004 IEC 61300-2-26-A1 ED 1.0 - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-26: TESTS - SALT MIST
    14/30295302 DC : 0 BS EN 61587-1 ED. 4.0 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITIONS
    BS EN 60966-1:1999 Radio frequency and coaxial cable assemblies Generic specification. General requirements and test methods
    BS EN 60687:1993 ALTERNATING CURRENT STATIC WATT HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2S AND 0.5S)
    BS CECC 16000-1:1992 Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays General
    BS ISO 17363:2013 Supply chain applications of RFID. Freight containers
    BS EN 61757-1:2012 Fibre optic sensors Generic specification
    PD CEN ISO/TS 14907-1:2015 Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures
    BS EN 61036:1997 ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
    BS EN 60749:1999 SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS
    BS EN 60539-1:2016 Directly heated negative temperature coefficient thermistors Generic specification
    04/30112662 DC : DRAFT APR 2004 IEC 61810-7 ED.2 - ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES
    DD IEC PAS 62246-2-1 : DRAFT 2008 REED CONTACT UNITS - PART 2-1: HEAVY-DUTY REED SWITCHES - QUALITY ASSESSMENT SPECIFICATION
    DD CEN ISO/TS 14907-1:2010 Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures
    BS EN 60335-2-71:2003 Household and similar electrical appliances. Safety Particular requirements for electrical heating appliances for breeding and rearing animals
    CSA E60335.2.71 : 2006 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS
    BS EN 61169-8:2007 RADIO-FREQUENCY CONNECTORS - PART 8: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 6,5 MM (0,256 IN) WITH BAYONET LOCK - CHARACTERISTICS IMPEDANCE 50 OHMS (TYPE BNC)
    05/30135445 DC : DRAFT JUN 2005 IEC 61169-8 - RADIO-FREQUENCY CONNECTORS - PART 8: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 6,5 MM (0,256 IN) WITH BAYONET LOCK - CHARACTERISTICS IMPEDANCE 50 OHMS (TYPE BNC)
    BS EN 62271-203:2012 High-voltage switchgear and controlgear Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
    BS EN 61114-2:1997 METHODS OF MEASUREMENT ON RECEIVING ANTENNA FOR SATELLITE BROADCAST TRANSMISSION IN THE 11/12 GHZ BAND - PART 2: MECHANICAL AND ENVIRONMENTAL TESTS ON INDIVIDUAL AND COLLECTIVE RECEIVING ANTENNAS
    BS CECC68000(1990) : AMD 9184 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: QUARTZ CRYSTAL UNITS
    NF EN 60947-5-5 : 1998 AMD 2 2017 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
    EN IEC 60099-8:2018 Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
    UNE-IEC/TS 61827:2011 Electrical installations for lighting and beaconing of aerodromes - Characteristics of inset and elevated luminaires used on aerodromes and heliports
    DIN ISO 10109:2015-12 OPTICS AND PHOTONICS - GUIDANCE FOR THE SELECTION OF ENVIRONMENTAL TESTS (ISO 10109:2015)
    EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    I.S. EN 61757-1:2012 FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012 (EQV))
    S.R. HD 60364-5-51:2009 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
    I.S. EN 61810-7:2006 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES
    I.S. EN 61394:2011 OVERHEAD LINES - REQUIREMENTS FOR GREASES FOR ALUMINIUM, ALUMINIUM ALLOY AND STEEL BARE CONDUCTORS (IEC 61394:2011)
    BS EN 50539-11 : 2013 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
    I.S. EN 60335-2-24:2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-24: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE MAKERS
    OIML D 11 : 2013 GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS
    CEI EN 50326 : 2003 CONDUCTORS FOR OVERHEAD LINES - CHARACTERISTICS OF GREASES
    BS EN 60335-2-24:2010+A2:2019 Household and similar electrical appliances. Safety Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
    I.S. EN 60749-13:2002 SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 13: SALT ATMOSPHERE
    UNE-EN 60099-4:2016 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
    I.S. EN 61114-2:1999 METHODS OF MEASUREMENT ON RECEIVING ANTENNAS FOR SATELLITE BROADCAST TRANSMISSION IN THE 11/12 GHZ BAND - PART 2: MECHANICAL AND ENVIRONMENTAL TESTS ON INDIVIDUAL AND COLLECTIVE RECEIVING ANTENNAS
    I.S. EN 62246-1-1:2013 REED SWITCHES - PART 1-1: GENERIC SPECIFICATION - QUALITY ASSESSMENT (IEC 62246-1-1:2013 (EQV))
    NF EN 60099-9 : 2015 SURGE ARRESTERS - PART 9: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR HVDC CONVERTER STATIONS
    CSA C22.2 No. 61980-1 : 2016 ELECTRIC VEHICLE WIRELESS POWER TRANSFER (WPT) SYSTEMS - PART 1: GENERAL REQUIREMENTS
    IEC 60748-23-1:2002 Semiconductor devices - Integrated circuits - Part 23-1: Hybrid integrated circuits and film structures - Manufacturing line certification - Generic specification
    EN 60950-22:2017 Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
    UNE-EN 50290-4-1:2016 Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects
    BS EN 15183:2006 Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test
    IEC 62246-1:2015 Reed switches - Part 1: Generic specification
    IEC 61230:2008 Live working - Portable equipment for earthing or earthing and short-circuiting
    IEC 62752:2016 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
    UNE-EN 62271-203:2013 High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
    BS EN 50155:2017 Railway applications. Rolling stock. Electronic equipment
    IEC 60687:1992 Alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S)
    16/30282633 DC : 0 BS EN 50155 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK
    IEC 60512-11-6:2002 Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist
    I.S. EN 2591-307:2012 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 307: SALT MIST
    NF EN 60335-2-71 : 2005 AMD 1 2007 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS
    EN 60099-4:2014 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
    EN 61268:1996 Alternating current static var-hour meters for reactive energy (classes 2 and 3)
    EN 61300-2-26:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist
    EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
    EN 62246-1:2015 Reed switches - Part 1: Generic specification
    EN 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
    HD 60364-5-51:2009/A12:2017 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
    NF EN 60335-2-24 : 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-24: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE MAKERS
    EN 50539-11 : 2013 AMD 1 2014 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
    EN 61011:1992/A11:1996 ELECTRIC FENCE ENERGIZERS - SAFETY REQUIREMENTS FOR MAINS-OPERATED ELECTRIC FENCE ENERGIZERS
    EN 60687:1992/corrigendum:1993 ALTERNATING CURRENT STATIC WATT HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2S AND 0.5S)
    EN 60738-1:2006/A1:2009 THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
    DIN EN ISO 4611:2011-04 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
    EN 61230:2008 LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING
    EN 61114-2:1996 Methods of measurement on receiving antennas for satellite broadcast transmission in the 11/12 GHz band - Part 2: Mechanical and environmental tests on individual and collective receiving antennas
    EN 60169-21:1997 Radio-frequency connectors - Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling - Characteristic impendance 50 ohms (types SC-A and SC-B)
    EN 61086-2:2004 Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
    NBR 15820 : 2010 BOX FOR ELECTRIC POWER METER - REQUIREMENTS
    EN 181000:1994 Generic Specification: Fibre optic branching devices
    EN 180000:1995 Generic specification: Fibre optic attenuators
    EN 117000:1991 Generic Specification: Solid state all-or-nothing relays of assessed quality - Generic data and methods of test
    EN 168000 : 1993 AMD 2 1998 GENERIC SPECIFICATION - QUARTZ CRYSTAL UNITS
    NF EN 50483-6 : 2009 TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 6: ENVIRONMENTAL TESTING
    CEI 13-32 : 2000 WATT-VAR-HOUR METERS FOR LOW-VOLTAGE THREE-PHASE NETWORKS (INTEGRATED UNITS) PRESETTED FOR PROCESSING AND REMOTE MANAGEMENT OF DATA WITH OR WITHOUT INSERTION OF CURRENT TRANSFORMERS
    I.S. EN IEC 60099-8:2018 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
    BS EN 50483-6:2009 Test requirements for low voltage aerial bundled cable accessories Environmental testing
    99/240909 DC : DRAFT MAR 1999 BS EN 50315-1 - ACCUMULATORS FOR USE IN PHOTOVOLTAIC SYSTEMS - PART 1: SAFETY - TEST REQUIREMENTS AND PROCEDURE
    IEC 60950-22 REDLINE : 2ED 2016 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
    CEI EN 50470-1 : 2007 ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C)
    NF EN 62246-1-1 : 2013 REED SWITCHES - PART 1-1: GENERIC SPECIFICATION - QUALITY ASSESSMENT
    CEI EN 62217 : 2013 POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
    NF EN 60099-4 : 2015 SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS
    16/30309512 DC : 0 BS EN 62327 ED 2.0 - RADIATION PROTECTION INSTRUMENTATION - HAND-HELD INSTRUMENTS FOR THE DETECTION AND IDENTIFICATION OF RADIONUCLIDES AND FOR THE ESTIMATION OF AMBIENT DOSE EQUIVALENT RATE FROM PHOTON RADIATION
    NF EN 61869-1 : 2009 INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
    14/30295051 DC : 0 BS ISO 19095-4 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 4: ENVIRONMENTAL CONDITION FOR DURABILITY
    09/30194273 DC : 0 BS EN 62208 - EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
    06/30151992 DC : DRAFT JUN 2006 BS ISO 22239-2 - ROAD VEHICLES - CHILD SEAT PRESENCE AND ORIENTATION DETECTION SYSTEM (ISOCARE) - PART 2: RESONATOR SPECIFICATION
    CEI EN 60335-2-24 : 2011 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-24: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE MAKERS
    BS EN 61011:1993 Electric fence energizers. Safety requirements for mains-operated electric fence energizers
    PREN ISO 4611 : DRAFT 2010 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
    CEI EN 61300-2-26 : 2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-26: TESTS - SALT MIST
    13/30278343 DC : 0 BS EN 62246-1 - REED SWITCHES - PART 1: GENERIC SPECIFICATION
    ISO 16750-4:2010 Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads
    17/30336631 DC : 0 BS EN 62246-1-1 - REED SWITCHES - PART 1-1: DETAIL SPECIFICATION - QUALITY ASSESSMENT
    01/714407 DC : DRAFT OCT 2001 ISO/DIS 16750-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS
    BS ISO 19453-4:2018 Road vehicles. Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Climatic loads
    BS EN 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
    BS IEC/IEEE 60780-323 : 2016 NUCLEAR FACILITIES - ELECTRICAL EQUIPMENT IMPORTANT TO SAFETY - QUALIFICATION
    09/30167595 DC : 0 BS EN 60099-8 ED.1 - SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
    BS EN 60512-11-6:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11f. Corrosion, salt mist
    07/30175425 DC : DRAFT DEC 2007 BS EN 60335-2-24 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE-MAKERS
    BS ISO 16750-4:2010 Road vehicles. Environmental conditions and testing for electrical and electronic equipment Climatic loads
    BS EN 181000:1995 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION: FIBRE OPTIC BRANCHING DEVICES
    00/200618 DC : DRAFT JAN 2000 IEC 61827 ED.1 - ELECTRICAL INSTALLATION AND BEACONING OF AERODROMES - CHARACTERISTICS OF INSET AND ELEVATED LUMINAIRES USED ON AERODROMES
    CEI EN 61757-1 : 2013 FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION
    NF EN 62208 : 2012 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
    I.S. EN 168000:1994 QUARTZ CRYSTAL UNITS (GENERIC SPECIFICATION)
    NF EN 62246-1 : 2015 REED SWITCHES - PART 1: GENERIC SPECIFICATION
    BIS IS/IEC 62271-203 : 2003 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV
    BIS IS 13252-22 : 2014 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
    BS EN 62146-1 : 2014 GRADING CAPACITORS FOR HIGH-VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS - PART 1: GENERAL (IEC 62146-1:2013)
    IEC 60335-2-71:2018 Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals
    BS ISO 15003:2006 Agricultural engineering. Electrical and electronic equipment. Testing resistance to environmental conditions
    BS EN 60115-1 : 2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
    CEI EN 62208 : 2012 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
    I.S. EN 62246-1:2015 REED SWITCHES - PART 1: GENERIC SPECIFICATION
    EN 50470-1:2006 Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
    I.S. EN 50539-11:2013 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
    I.S. EN 60512-11-6:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-6: CLIMATIC TESTS - TEST 11F: CORROSION, SALT MIST
    IEEE/ANSI N42.38-2015 American National Standard for Performance Criteria for Spectroscopy-Based Portal Monitors Used in Homeland Security
    ISO 17363:2013 Supply chain applications of RFID Freight containers
    IEC 60539-1:2016 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
    NF EN 61230 : 2009 LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING
    ISO/TR 16335:2013 Corrosion of metals and alloys Corrosion tests in artificial atmospheres Guidelines for selection of accelerated corrosion test for product qualification
    EN IEC 62246-1-1:2018 Reed switches - Part 1-1: Generic specification - Blank detail specification
    CEI EN 60099-4 : 2015 SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS
    I.S. EN 60099-4:2014 SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS
    IEC 60099-8 REDLINE : 2ED 2017 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
    IEC 61757:2018 Fibre optic sensors - Generic specification
    CSA C22.2 No. 60335.2.24 : 2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-24: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE-MAKERS
    DIN EN 15183 E : 2006 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - CORROSION PROTECTION TEST
    IEC 60749:1996+AMD1:2000+AMD2:2001 CSV Semiconductor devices - Mechanical and climatic test methods
    EN 60335-2-24:2010 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
    I.S. EN ISO 4611:2010 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
    I.S. EN 50155:2017-11 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRONIC EQUIPMENT
    EN 60947-5-5 : 1997 AMD 2 2016 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION (IEC 60947-5-5:1997/A2:2016)
    BS 2011-2.1R:1990 ENVIRONMENTAL TESTING - TESTS - TEST R. AND GUIDANCE. WATER
    VDE 0700-216 : 1997 AMD 2 2001 SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING OF ANIMALS
    BS CECC17000(1992) : 1992 AMD 9626 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION - SOLID STATE ALL OR NOTHING RELAYS - GENERIC DATA AND METHODS OF TEST
    07/30149142 DC : 0 BS IEC 60115-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
    PREN 50290-4-1 : DRAFT 2013 COMMUNICATION CABLES - PART 4-1: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - ENVIRONMENTAL CONDITIONS AND SAFETY ASPECTS
    17/30347375 DC : 0 BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
    17/30356577 DC : 0 BS EN 60099-8 - SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
    IEC/IEEE 60780-323:2016 Nuclear facilities - Electrical equipment important to safety - Qualification
    13/30287806 DC : 0 BS EN 60539-1 - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
    11/30241337 DC : DRAFT JAN 2011 BS EN 61757-1 - FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION
    16/30353588 DC : 0 BS EN 61020-1 ED 3.0 - ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
    17/30296023 DC : DRAFT MAR 2017 BS ISO 19453-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT FOR DRIVE SYSTEM OF ELECTRIC PROPULSION VEHICLES - PART 4: CLIMATIC LOADS
    05/30134095 DC : DRAFT MAY 2005 IEC 61587-1 ED 2 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND 60297 - PART 1: CLIMATIC, MECHANICAL TESTS AND SAFETY ASPECTS FOR CABINETS, RACKS AND SUBRACKS
    10/30206257 DC : 0 BS EN ISO 4611 - PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
    DIN CEN ISO/TS 14907-1;DIN SPEC 91192:2015-12 ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015)
    12/30235047 DC : 0 BS EN 62146-1 ED.1 - GRADING CAPACITORS FOR HIGH-VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS
    BS ISO 10109:2015 Optics and photonics. Guidance for the selection of environmental tests
    02/208921 DC : DRAFT AUG 2002 IEC 62052-21 ED.1 - ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
    I.S. EN 61086-2:2004 COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST
    BS EN 61300-2-26:2007 Fibre optic interconnecting devices and passive Components. Basic test and measurement procedures Tests. Salt mist
    BS EN 140000:1995 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION: FIXED RESISTORS
    06/30153438 DC : DRAFT JULY 2006 BS IEC 60539-1 ED.2 - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORES - PART 1: GENERIC SPECIFICATION
    08/30179468 DC : DRAFT MAR 2008 BS EN 62271-203 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV
    CEI EN 62052-21 : 2005 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
    BS EN 62246-1:2015 Reed switches Generic specification
    15/30297966 DC : 0 BS EN 60950-22/ED2 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
    13/30279156 DC : 0 BS EN 6101-2-012 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
    CEI EN 61394 : 2012 OVERHEAD LINES - REQUIREMENTS FOR GREASES FOR ALUMINIUM, ALUMINIUM ALLOY AND STEEL BARE CONDUCTORS
    BS EN 60749-13:2002 Semiconductor devices. Mechanical and climatic test methods Salt atmosphere
    BS EN 60099-8:2011 Surge arresters Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
    07/30166893 DC : 0 BS EN 61394 - OVERHEAD LINES - REQUIREMENTS FOR GREASES FOR ALUMINIUM, ALUMINIUM ALLOY STEEL BARE CONDUCTORS
    BS CECC 22000:1980 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: RADIO FREQUENCY COAXIAL CONNECTORS
    IEC 62327:2017 Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the estimation of ambient dose equivalent rate from photon radiation
    BS EN 61169-1:2013 Radio-frequency connectors Generic specification. General requirements and measuring methods
    13/30277837 DC : 0 BS EN 62817 ED 1.0 - SOLAR TRACKERS FOR PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION
    03/103069 DC : DRAFT JAN 2003
    CCS GUIDELINE E-07 : DEC 2017 TRANSFORMERS
    14/30295038 DC : 0 BS ISO 19095-1 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 1: GUIDELINES FOR THE APPROACH
    BS EN 62217:2013 Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
    BS QC 763000(1990) : AMD 6754 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. FILM AND HYBRID FILM INTEGRATED CIRCUITS. GENERIC SPECIFICATION
    CSA C22.2 No. 61010-2-012 : 2017 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
    BS EN 50463 : 2007 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS
    10/30234803 DC : 0 BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
    BS EN 50298:1999 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
    BS EN 168000:1996 Harmonized system of quality assessment for electronic components. Generic specification: quartz crystal units
    BS EN 62246-1-1:2013 REED SWITCHES - PART 1-1: GENERIC SPECIFICATION - QUALITY ASSESSMENT
    CEI EN 61587-1 : 2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
    04/30124042 DC : DRAFT OCT 2004 IEC 61300-2-26 - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-26: TESTS - SALT MIST
    BS EN 61086-2:2004 Coatings for loaded printed wire boards (conformal coatings) Methods of test
    BS EN 61243-5:2001 Live working. Voltage detectors Voltage detecting systems (VDS)
    BS EN 50290-4-1:2014 Communication cables General considerations for the use of cables. Environmental conditions and safety aspects
    BS EN 60335-2-24:2010+A2:2019 Household and similar electrical appliances. Safety Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
    IEC 60364-5-51:2005 Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules
    CEI 79-17 : 2002 PROTECTION SYSTEMS FOR UNAUTHORIZED USE OF MOTOR VEHICLES - PARTICULAR REQUIREMENTS FOR THE PROTECTION SYSTEMS AGAINST THE THEFT FOR COMMERCIAL VEHICLES
    UNE-EN 62208:2012 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
    NF EN 62052-11 : 2003 AMD 1 2017 ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT
    ISO 19453-4:2018 Road vehicles — Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles — Part 4: Climatic loads
    CEI EN 61643-11 : 2014 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS
    I.S. EN 61869-1:2009 INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
    I.S. EN 50470-1:2006 ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C)
    I.S. EN 61643-11:2012 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TESTS METHODS
    CEI EN 61114-2 : 1997 METHODS OF MEASUREMENT ON RECEIVING ANTENNAS FOR SATELLITE BROADCAST TRANSMISSION IN THE 11/12 GHZ BAND PART 2: MECHANICAL AND ENVIRONMENTAL TESTS ON INDIVIDUAL AND COLLECTIVE RECEIVING ANTENNAS
    I.S. EN 62752:2016&AC:2019-03 IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
    I.S. EN 50483-6:2009 TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 6: ENVIRONMENTAL TESTING
    I.S. EN 61439-1:2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
    I.S. EN 61230:2008 LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING
    I.S. EN 62271-203:2012 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV (IEC 62271-203:2011 (EQV))
    I.S. EN 60439-5:2006 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
    IEC 60099-8:2017 Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
    CEI EN 61086-2 : 2005 COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST
    CSA C61869-1 : 2014 INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
    ISO 10109:2015 Optics and photonics Guidance for the selection of environmental tests
    API 551 : 2016 PROCESS MEASUREMENT
    I.S. EN 50463:2007 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS
    IEC 60115-1:2008 Fixed resistors for use in electronic equipment - Part 1: Generic specification
    IEC PAS 62246-2-1:2008 Reed contact units - Part 2-1: Heavy-duty reed switches - Quality assessment specification
    IEC TS 61827:2004 Electrical installations for lighting and beaconing of aerodromes - Characteristics of inset and elevated luminaires used on aerodromes and heliports
    I.S. EN 50290-4-1:2014 COMMUNICATION CABLES - PART 4-1: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - ENVIRONMENTAL CONDITIONS AND SAFETY ASPECTS
    IEC 60780:1998 Nuclear power plants - Electrical equipment of the safety system - Qualification
    I.S. EN 60115-1:2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 60115-1:2008, MODIFIED)
    I.S. EN 61587-1:2017 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
    UNE-EN 50491-2:2011 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 2: Environmental conditions
    IEC 60439-5:2006 Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies for power distribution in public networks
    IEC 61169-1:2013 Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods
    04/30123347 DC : DRAFT OCT 2004 IEC 61439-1 - LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
    IEC 62217:2012 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
    UNE-EN 61869-1:2010 Instrument transformers -- Part 1: General requirements
    EN 50155:2017 Railway applications - Rolling stock - Electronic equipment
    EN 50298:1998 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
    UNI EN ISO 4611 : 2011 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
    UNI EN 2591-307 : 2012 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 307: SALT MIST
    EN ISO 4611:2010 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
    CEI EN 61243-5 : 2002 LIVE WORKING - VOLTAGE DETECTORS - PART 5: VOLTAGE DETECTING SYSTEMS (VDS)
    BS ISO 19095-1:2015 Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies Guidelines for the approach
    I.S. EN 62052-21:2004 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
    NF EN 300019 2-4 : 2016 ENVIRONMENTAL ENGINEERING (EE) - ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT - PART 2-4: SPECIFICATION OF ENVIRONMENTAL TESTS - STATIONARY USE AT NON-WEATHERPROTECTED LOCATIONS (V2.4.1)
    01/205932 DC : DRAFT AUG 2001 BS 8431 - CODE OF PRACTICE FOR ELECTRICAL STATIC METERING FOR SECONDARY OR SUB-METERING
    ISO 15763:2002 Road vehicles Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t
    CEI 45-60 : 2009 NUCLEAR POWER PLANTS - ELECTRICAL EQUIPMENT OF THE SAFETY SYSTEM - QUALIFICATION
    IEC 61587-1:2016 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
    I.S. EN 143000:1994 THERMISTORS (GENERIC SPECIFICATION)
    BS EN 60169-21:1997 RADIO-FREQUENCY CONNECTORS - PART 21: TWO TYPES OF RADIO-FREQUENCY CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9,5 MM (0,374 IN) WITH DIFFERENT VERSIONS OF SCREW COUPLING - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPES SC-A AND SC-B)
    CEI EN 60169-21 : 1998 RADIO-FREQUENCY CONNECTORS - PART 21: TWO TYPES OF RADIO-FREQUENCY CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9,5 MM (0,374 IN) WITH DIFFERENT VERSIONS OF SCREW COUPLING CHARACTERISTIC IMPEDANCE 50 OHMS (TYPES SC-A AND SC-B)
    17/30363106 DC : DRAFT SEP 2017 BS IEC 63138-1 ED.1.0 - MULTI-RADIO FREQUENCY CHANNEL CONNECTORS - PART 1: GENERIC SPECIFICATION-GENERAL REQUIREMENTS AND MEASURING METHODS
    BS IEC 62401 : 2017 RADIATION PROTECTION INSTRUMENTATION - ALARMING PERSONAL RADIATION DEVICES (PRDS) FOR THE DETECTION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL
    04/30125747 DC : DRAFT NOV 2004 IEC 60439-5 ED.2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
    BS EN 61394:2011 Overhead lines. Requirements for greases for aluminium, aluminium alloy and steel bare conductors
    05/30135124 DC : DRAFT JUN 2005 IEC 61587-1 ED 2 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND 60297 - PART 1: CLIMATIC, MECHANICAL TESTS AND SAFETY ASPECTS FOR CABINETS, RACKS AND SUBRACKS
    08/30173382 DC : DRAFT AUG 2008 BS ISO 16750-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS
    10/30234015 DC : 0 BS EN 62246-1-1 ED.1 - REED SWITCHES - PART 1-1: QUALITY ASSESSMENT SPECIFICATION
    BS EN 61230:2008 LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING
    DIN EN 61268 : 1996 ALTERNATING CURRENT STATIC VAR-HOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3)
    13/30264600 DC : 0 BS EN 60747-14-8 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-8: SEMICONDUCTOR SENSORS - CAPACITIVE DEGRADATION SENSOR OF LIQUID
    I.S. HD 632:2016 POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES ABOVE 36 KV (U[M] = 42 KV) UP TO 150 KV (U[M] = 170 KV)