IEC 60079-20-1:2010

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Superseded date: 31-12-2021

Language(s):

Published date: 21-01-2010

Publisher: International Electrotechnical Committee

Table of Contents - (Show below) - (Hide below)

FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Classification of gases and vapours
5 Data for flammable gases and vapours, relating to the
use of equipment
6 Method of test for the maximum experimental safe gap
7 Method of test for auto-ignition temperature
Annex A (normative) - Furnaces of test apparatus for the
tests of auto-ignition temperature
Annex B (informative) - Tabulated values
Bibliography

Abstract - (Show below) - (Hide below)

IEC 60079-20-1:2010 provides guidance on classification of gases and vapours. It describes a test method intended for the measurement of the maximum experimental safe gaps (MESG) for gas- or vapour-air mixtures under normal conditions of temperature and pressure so as to permit the selection of an appropriate group of equipment. The tabulated values of chemical and engineering properties of substances are provided to assist engineers in their selection of equipment to be used in hazardous areas. This first edition of IEC 60079-20-1 cancels and replaces the first edition of IEC 60079-1-1(2002), the second edition of IEC 60079-4 (1975), its amendment 1(1995) and its complement: IEC 60079-4A (1970), the first edition of IEC/TR 60079-12 (1978) and the first edition of IEC 60079-20 (1996). It constitutes a technical revision. The contents of the corrigendum of July 2012 have been included in this copy.

General Product Information - (Show below) - (Hide below)

Development Note	Supersedes IEC 60079-1-1, IEC 60079-4, IEC 60079-4A, IEC 60079-12, and IEC 60079-20. (01/2010) Stability Date: 2017. (07/2015)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Electrotechnical Committee
Status	Superseded
Supersedes	IEC TR 60079-20:1996 IEC 60079-1-1:2002 IEC TR 60079-12:1978 IEC 60079-4A:1970

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
GOST R IEC 60079-20-1 : 2011	Identical
NF EN 60079-20-1 : 2010	Identical
NEN EN IEC 60079-20-1 : 2010 C1 2012	Identical
I.S. EN 60079-20-1:2010	Identical
PN EN 60079-20-1 : 2013	Identical
SANS 60079-20-1 : 2010 COR 1 2014	Identical
VDE 0170-20-1 : 2010	Identical
DIN EN 60079-20-1 : 2010	Identical
AS/NZS 60079.20.1:2012	Identical
BIS IS/IEC 60079-20-1 : 2010	Identical
BS EN 60079-20-1:2010	Identical
CEI EN 60079-20-1 : 2010	Identical
EN 60079-20-1:2010	Identical
UNE-EN 60079-20-1:2010	Identical
UNE-EN 60079-20-1:2014	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

ISO/IEC 80079-38:2016	Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines
PREN 1127-1 : DRAFT 2017	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
BS EN ISO 16852:2010	FLAME ARRESTERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND LIMITS FOR USE
13/30279579 DC : 0	BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY
UNI EN 13237 : 2012	POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
12/30243465 DC : 0	BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
CSA C22.2 No. 60079.1 : 2016	EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
BS EN 62282-3-100:2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
12/30260078 DC : 0	BS EN 60092-502 IEC 60092-502 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 502: TANKERS - SPECIAL FEATURES
UNE-EN 60079-10-1:2016	Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
CSA C22.2 No. 60079.0 : 2015	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
BS EN 61285:2015	Industrial-process control. Safety of analyzer houses
BS EN 50570:2013	Household and similar electrical appliances. Safety. Particular requirements for commercial electric tumble dryers
CEI EN 61285 : 2016	INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYZER HOUSES
CSA C22.2 No. 61010-2-011 : 2017	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-011: PARTICULAR REQUIREMENTS FOR REFRIGERATING EQUIPMENT
I.S. EN 50570:2013	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
I.S. EN 60079-10-1:2015	EXPLOSIVE ATMOSPHERES - PART 10-1: CLASSIFICATION OF AREAS - EXPLOSIVE GAS ATMOSPHERES
CSA C22.2 No. 62282-2 : 2007 : R2013	FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
S.R. CEN/TR 16787:2014	INDUSTRIAL GAS INSTALLATION - GUIDELINE
PD CLC/TR 60079-32-1:2015	EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE
17/30365866 DC : 0	BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
18/30369304 DC : DRAFT APR 2018	BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
IEC 60079-0:2017	Explosive atmospheres - Part 0: Equipment - General requirements
DIN EN ISO/IEC 80079-38:2012-08 (Draft)	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
IEC 60079-0 REDLINE : 7.0	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
EN ISO 80079-36:2016	Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
EN IEC 60079-7:2015/A1:2018	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015/A1:2017)
BS EN ISO 80079-36:2016	Explosive atmospheres. Non-electrical equipment for explosive atmospheres. Basic method and requirements
BS EN ISO 80601-2-13:2012+A2:2019	Medical electrical equipment Particular requirements for basic safety and essential performance of an anaesthetic workstation
DIN EN 1473:2016-10	Installation and equipment for liquefied natural gas - Design of onshore installations
BS ISO 26142:2010	HYDROGEN DETECTION APPARATUS - STATIONARY APPLICATIONS
BS EN 61010-2-011:2017	Safety requirements for electrical equipment for measurement, control, and laboratory use Particular requirements for refrigerating equipment
I.S. EN 12583:2014	GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
EN 62282-2:2012	Fuel cell technologies - Part 2: Fuel cell modules
CEN/TR 16793:2016	Guide for the selection, application and use of flame arresters
EN 13237:2012	Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
EN ISO 80601-2-13:2012	Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011)
EN ISO 80079-37:2016	Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016)
S.R. CLC/TR 60079-32-1:2015	EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE
12/30258747 DC : DRAFT MAR 2012	BS EN 12583 - GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
BS EN ISO 80601-2-13:2012	Medical electrical equipment Particular requirements for basic safety and essential performance of an anaesthetic workstation
BS EN 62282-5-1:2012 (published 2013-01)	Fuel cell technologies Portable fuel cell power systems. Safety
12/30258581 DC : 0	BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS
14/30284759 DC : 0	BS EN ISO 16852 - FLAME ARRESTERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND LIMITS FOR USE
PD CEN/TR 16793:2016	GUIDE FOR THE SELECTION, APPLICATION AND USE OF FLAME ARRESTERS
BS EN 60079-29-2:2015	Explosive atmospheres Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen
CEN/TR 16787:2014	Industrial Gas Installation - Guideline
15/30320559 DC : 0	BS EN 60335-2-11 ED 7.0 /A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR TUMBLE DRYERS
NFPA 497 : 2017	CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
UNE-EN 60079-1:2015	Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
14/30297169 DC : 0	BS EN 60335-2-24/A2/ED7 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-24: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE MAKERS
DIN EN ISO 16852:2010-09	FLAME ARRESTERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND LIMITS FOR USE (ISO 16852:2016)
I.S. EN ISO 80079-36:2016	EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO/DIS 80079-36:2014)
BS EN 60079-7 : 2015	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015)
C22.1-15 PACKAGE	Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference
IEC 60079-1 REDLINE : 7ED 2014	EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
IEC 60079-1:2014 RLV	Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-7:2015+AMD1:2017 CSV	Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
IEC 60079-10-1:2015 RLV	Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
DIN EN ISO 80079-36 E : 2016	EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO 80079-36:2016)
UNE-EN ISO 80601-2-13:2013	Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011)
ISO 80079-36:2016	Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements
EN 62282-3-100:2012	Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
BIS IS/IEC 60079-0 : 2011	EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
DIN EN 1473:1997-11	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
I.S. EN 13237:2012	POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
Z462-18	Workplace electrical safety
DIN EN 12583:2000-11	GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
I.S. EN 62282-2:2012	FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV))
CEI EN 62282-2 : 2013	FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
EN 60079-10-1:2015	Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
C22.1HB-18	Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I
BS EN ISO 80079-37:2016	Explosive atmospheres Non-electrical equipment for explosive atmospheres. Non-electrical type of protection constructional safety \'\'c\'\', control of ignition sources \'\'b\'\', liquid immersion \'\'k\'\'
DIN EN ISO 80079-37:2016-12	Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety "c", control of ignition sources "b", liquid immersion "k" (ISO 80079-37:2016)
PREN 1473 : DRAFT 2018	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
NF EN 61285 : 2015	INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYZER HOUSES
UNE-EN 60079-13:2011	Explosive atmospheres - Part 13: Equipment protection by pressurized room "p"
PD IEC/TS 60079-40:2015	Explosive atmospheres Requirements for process sealing between flammable process fluids and electrical systems
14/30278882 DC : 0	BS EN 60079-7 IEC 60079-7 ED. 5.0 - EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
16/30354071 DC : 0	BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS ISO 14839-4:2012	Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings Technical guidelines
CEI EN 62282-3-100 : 2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
IEC 60730-2-5:2013+AMD1:2017 CSV	Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
14/30310243 DC : 0	BS EN 60079-40 - EXPLOSIVE ATMOSPHERES - REQUIREMENTS FOR PROCESS SEALING BETWEEN FLAMMABLE OR COMBUSTIBLE PROCESS FLUIDS AND ELECTRICAL SYSTEMS
PD CEN/TR 16787:2014	Industrial Gas Installation. Guideline
UNE-EN ISO 16852:2017	Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
ANSI/CSA FC 1:2014	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
SAE J 2578 : 2014	RECOMMENDED PRACTICE FOR GENERAL FUEL CELL VEHICLE SAFETY
CSA C22.2 NO. 60079-29-1:17	EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
ISO/TS 19880-1:2016	Gaseous hydrogen Fuelling stations Part 1: General requirements
I.S. EN 60079-29-2:2015	EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN
I.S. EN ISO 80601-2-13:2012	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION (ISO 80601-2-13:2011)
EN ISO/IEC 80079-38:2016	Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
I.S. EN 60335-2-89:2010	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR
IEC 60079-29-2 REDLINE : 2ED 2015	EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN
EEMUA 186 : 2016	A PRACTITIONER'S HANDBOOK FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 12583:2014-07	GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
IEC 60335-2-89:2010+AMD1:2012+AMD2:2015 CSV	Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor
UNE-EN 61010-2-011:2017	Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
IEC 62282-5-1:2012	Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
CSA CE CODE SAFETY PACKAGE : 2012	CE CODE SAFETY PACKAGE
CSA C22.2 No. 60079.1 : 2016	EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
UNI EN 12583 : 2014	GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
DIN EN ISO/IEC 80079-38 E : 2017	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
I.S. EN 60079-0:2012	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD))
I.S. EN 60079-2:2014	EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P'
FM 6061 : 2013 ADD 1 2016	FLAME ARRESTERS
BS EN 60079-10-1:2015	Explosive atmospheres Classification of areas. Explosive gas atmospheres
BS EN 60079-2:2014	Explosive atmospheres Equipment protection by pressurized enclosure \'p\'
I.S. EN 61285:2015	INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYZER HOUSES
BS EN ISO/IEC 80079-38 : 2016	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016)
BS PD IEC TS 60079-32-1 : 2013	EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE
I.S. EN 62282-3-100:2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV))
I.S. EN ISO/IEC 80079-38:2016	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012)
CSA C22.2 No. 60079-7 : 2016	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
I.S. EN ISO 80079-37:2016	EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY ''C'', CONTROL OF IGNITION SOURCES ''B'', LIQUID IMMERSION ''K'' (ISO/DIS 80079-37:2014)
CSA C22.2 No. 60079-2 : 2016	EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P'
CEI EN 61010-2-012 : 1ED 2017	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
UNE-EN ISO 80079-37:2018	Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016)
IEC TS 60079-40:2015	Explosive atmospheres - Part 40: Requirements for process sealing between flammable process fluids and electrical systems
IEC 61892-7:2014	Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas
13/30276640 DC : 0	BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY
BS EN 12583:2014	Gas Infrastructure. Compressor stations. Functional requirements
IEC 61010-2-011:2016	Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
ISO 26142:2010	Hydrogen detection apparatus Stationary applications
ISO 16852:2016	Flame arresters Performance requirements, test methods and limits for use
IEC 60335-2-24:2010+AMD1:2012+AMD2:2017 CSV	Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
BS EN 62282-4-101:2014	Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks
12/30276304 DC : 0	BS EN 61892-7 ED 3.0 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 7: HAZARDOUS AREAS
UNE-EN 60079-0:2013	Explosive atmospheres - Part 0: Equipment - General requirements
11/30242646 DC : DRAFT FEB 2011	BS EN 62282-2 - FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
UNE-EN 60335-2-89:2010	Household and similar electrical appliances - Safety -- Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
IEC 62282-4-101:2014	Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
BS EN 13237:2012	Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
UNE-EN 62282-5-1:2013	Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
IEC 62282-2:2012	Fuel cell technologies - Part 2: Fuel cell modules
IEC 60079-29-2:2015 RLV	Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
ISO 80079-37:2016	Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k'
ISO 80601-2-13:2011	Medical electrical equipment Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation
IEC 60079-10-1:2015	Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
IEC 62282-3-100:2012	Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
UNI EN ISO 80601-2-13 : 2013	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION
UNE-EN 50570:2014	Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers
BS EN 62282-2:2012	FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
IEC 61285:2015	Industrial-process control - Safety of analyser houses
UNE-EN 60079-2:2015	Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
UNE-EN 62282-2:2012	Fuel cell technologies - Part 2: Fuel cell modules
DIN EN ISO 80079-36:2016-12	Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
DIN EN ISO 80079-37 E : 2016	EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'C', CONTROL OF IGNITION SOURCES 'B', LIQUID IMMERSION 'K' (ISO 80079-37:2016)
14/30297177 DC : 0	BS EN 60335-2-89/A2/ED2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT UNIT OR COMPRESSOR
13/30267536 DC : 0	BS EN 60079-29-1 ED 2.0 - EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
12/30243459 DC : 0	BS ISO/IEC 80079-37 - EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'CH', CONTROL OF IGNITION SOURCES 'BH', LIQUID IMMERSION 'KH'
ISO 14839-4:2012	Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 4: Technical guidelines
11/30247086 DC : 0	BS EN 60079-1 ED. 7.0 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES "D"
BS EN 60079-0 : 2012	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
I.S. EN 60079-7:2015	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
I.S. EN 62282-5-1:2012	FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012 (EQV))
CEI EN 60079-13 : 2011	EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT PROTECTION BY PRESSURIZED ROOMS 'P'
I.S. EN 60079-1:2014	EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
EN 60335-2-89:2010/A2:2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR (IEC 60335-2-89:2010/A2:2015, MODIFIED)
UNE-EN 60079-29-2:2016	Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
CSA C22.2 No. 62282-2 :2007	FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
S.R. CEN/TR 16793:2016	GUIDE FOR THE SELECTION, APPLICATION AND USE OF FLAME ARRESTERS
CLC/TR 60079-32-1:2015	Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance
IEC 60079-10-1 REDLINE : 2ED 2015	EXPLOSIVE ATMOSPHERES - PART 10-1: CLASSIFICATION OF AREAS - EXPLOSIVE GAS ATMOSPHERES
I.S. EN ISO 16852:2016	FLAME ARRESTERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND LIMITS FOR USE (ISO 16852:2016)
DIN EN 13237:2013-01	POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
C22.1-18	Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations
13/30286778 DC : 0	BS EN 60079-1 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
BS IEC 61892-7:2014	MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 7: HAZARDOUS AREAS
16/30354067 DC : 0	BS EN 62282-5-100 - FUEL CELL TECHNOLOGIES - PART 5-100: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY
12/30236742 DC : 0	BS ISO/IEC 80079-36 - EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - BASIC METHODS AND REQUIREMENTS
IEC 60079-0:2017 RLV	Explosive atmospheres - Part 0: Equipment - General requirements
EN 60079-2:2014/AC:2015	EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014)
EN 60079-0:2012/A11:2013	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
I.S. EN 61010-2-011:2017	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-011: PARTICULAR REQUIREMENTS FOR REFRIGERATING EQUIPMENT
EN 50570:2013/A1:2018	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
EN 12583:2014	Gas Infrastructure - Compressor stations - Functional requirements
EN 62282-5-1:2012	FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012)
EN ISO 16852:2016	Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
EN 60079-1:2014	Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 61010-2-011:2017	Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment
EN 60079-29-2:2015	Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
EN 62282-4-101:2014	Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
EN 61285:2015	Industrial-process control - Safety of analyzer houses

Standards Referencing This Book - (Show below) - (Hide below)

IEC 60050-426:2008	International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
IEC 60079-11:2011	Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-14:2013	Explosive atmospheres - Part 14: Electrical installations design, selection and erection

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account