Skip to content
Please enter a keyword to search

  • IEC 60216-2:2005

    Current The latest, up-to-date edition.

    Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French

    Published date:  11-08-2005

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    1 Scope
    2 Normative references
    3 General considerations
    4 Guide for the choice of properties and end-points
    Annex A (informative) Additional Information on the group
                          to which new or unknown materials
                          should be assigned

    Abstract - (Show below) - (Hide below)

    Gives guidance for the choice of test criteria for the determination of thermal endurance characteristics. It includes a list of existing published procedures which is however not exhaustive.The main changes from the previous edition are as follows:- editorial,- Table 1 has been actualized essentially by Part 3 sheets of SC 15C publications.

    General Product Information - (Show below) - (Hide below)

    Committee TC 112
    Development Note Also numbered as BS 5691-2(1995) (08/2005) Stability Date: 2022. (09/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 60780-323:2017 NUCLEAR FACILITIES - ELECTRICAL EQUIPMENT IMPORTANT TO SAFETY - QUALIFICATION
    BS EN 61241-1:2004 Electrical apparatus for use in the presence of combustible dust Protection by enclosures 'tD'
    IEC 62930:2017 Electric cables for photovoltaic systems with a voltage rating of 1,5 kV DC
    CSA C22.2 No. 0.17 : 2000 : R2004 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
    BS 2782-1.135(1993) : 1993 AMD 10349 METHODS OF TEST PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT
    IEC 62899-201:2016 Printed electronics - Part 201: Materials - Substrates
    05/30128627 DC : DRAFT FEB 2005 IEC 60216-6 ED.2 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD
    BS 7290-2(1990) : 1990 AMD 10106 PLASTICS FILMS FOR ELECTRICAL PURPOSES - METHODS OF TEST
    I.S. EN 60079-0:2012 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD))
    15/30294124 DC : 0 BS EN 60674-2 ED 2.0 - SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
    CEI EN 60216-3 : 2006 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 3: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS
    EN IEC 61730-1:2018/AC:2018-06 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2016)
    BS PD IEC TS 62446-3 : 2017 PHOTOVOLTAIC (PV) SYSTEMS - REQUIREMENTS FOR TESTING, DOCUMENTATION AND MAINTENANCE - PART 3: PHOTOVOLTAIC MODULES AND PLANTS - OUTDOOR INFRARED THERMOGRAPHY
    BS EN 60216-1:2013 Electrical insulating materials. Thermal endurance properties Ageing procedures and evaluation of test results
    CSA C22.2 No. 60079.0 : 2015 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
    CEI EN 60454-2 : 2008 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
    CSA E60079.15 : 2002 : R2011 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL APPARATUS WITH TYPE OF PROTECTION "n"
    IEC TS 62332-2:2014 Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 2: Simplified test
    I.S. EN 60505:2011 EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS
    I.S. EN 62109-1:2010 SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
    I.S. EN 50618:2014 ELECTRIC CABLES FOR PHOTOVOLTAIC SYSTEMS
    IEC 60079-0 REDLINE : 7.0 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
    BS EN 50021:1999 Electrical apparatus for potentially explosive atmospheres. Type of prot ection \'n\'
    I.S. EN IEC 61730-1:2018 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
    ASTM D 1830 : 2017 : REDLINE Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
    IEC 61241-0:2004 Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
    NF EN 60216-3 : 2006 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 3: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS
    EN 60137:2017 Insulated bushings for alternating voltages above 1 000 V
    IEC 61730-1:2016 Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction
    ASTM D 2756 : 2007 : R2012 Standard Test Method for Weight Loss of Electrical Insulating Varnishes
    ASTM D 3377 : 2004 Standard Test Method for Weight Loss of Solventless Varnishes
    EN IEC 60079-7:2015/A1:2018 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015/A1:2017)
    BS EN ISO 11248:2000 PLASTICS - THERMOSETTING MOULDING MATERIALS - EVALUATION OF SHORT-TERM PERFORMANCE AT ELEVATED TEMPERATURES
    16/30330036 DC : 0 BS EN 62788-2 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 2: POLYMERIC MATERIALS USED FOR FRONTSHEETS AND BACKSHEETS
    EN 60216-6:2006 Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
    EN 60747-5-2:2001/A1:2002 DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-2: OPTOELECTRONIC DEVICES - ESSENTIAL RATINGS AND CHARACTERISTICS
    EN 61241-1:2004/corrigendum Dec. 2006 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD"
    EN 50021 : 99 COR 2000 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - TYPE OF PROTECTION "N"
    EN 60684-2:2011 Flexible insulating sleeving - Part 2: Methods of test
    EN 60505:2011/AC:2017-03 EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS (IEC 60505:2011/COR1:2017)
    EN 60454-2:2007 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
    EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
    EN 61212-2:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test
    EN 60216-3-2:1995 Guide for the determination of thermal endurance properties of electrical insulating materials - Part 3: Instructions for calculating thermal endurance characteristics - Section 2: Calculations for incomplete data: proof test results up to and including the median time to end-point (equal test groups)
    NBR IEC 60079-0 : 2013 ERRATA 2 2016 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
    BS 2782-1.136(1994) : 1994 AMD 10687 METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE SHORT-TERM PERFORMANCE OF THERMOSETTING MOULDING MATERIALS AT ELEVATED TEMPERATURES
    04/30111589 DC : 0
    DIN ISO 5630-4 E : 2017 PAPER AND BOARD - ACCELERATED AGEING - PART 4: DRY HEAT TREATMENT AT 120 OR 150 DEGREES C (ISO 5630-4:1986)
    03/300201 DC : DRAFT FEB 2003 IEC 60079-0 ED.4.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
    BS EN 60216-8:2013 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES
    BS 3G 198-3:1994 SLEEVES FOR AIRCRAFT ELECTRIC CABLES AND EQUIPMENT WIRES - SPECIFICATION FOR HEAT-SHRINKABLE SLEEVING FOR BINDING, INSULATION AND IDENTIFICATION
    DIN EN 60216-3-2 : 1997 GUIDE FOR THE DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - PART 3: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS - SECTION 2: CALCULATIONS FOR INCOMPLETE DATA: PROOF TEST RESULTS UP TO AND INCLUDING THE MEDIAN TIME TO END-POINT (EQUAL TEST GROUPS)
    00/243930 DC : DRAFT AUG 2000 IEC 60079-18. ED. 2. ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 18: ENCAPSULATION 'M'
    I.S. EN 60216-5:2008 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 5: DETERMINATION OF RELATIVE THERMAL ENDURANCE INDEX (RTE) OF AN INSULATING MATERIAL
    BS EN 50281-1-1:1999 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING
    PD IEC/TS 60216-7-1:2015 ELECTRICAL INSULATION MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 7-1: ACCELERATED DETERMINATION OF RELATIVE THERMAL ENDURANCE USING ANALYTICAL TEST METHODS RTE[A] - INSTRUCTIONS FOR CALCULATIONS BASED ON ACTIVATION ENERGY
    02/204778 DC : DRAFT JULY 2002 IEC 61241-0 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
    CSA C22.2 No. 0.17 : 2000 : R2013 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
    BS EN 60747-5-5 : 2011 SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS
    BS IEC/IEEE 60780-323 : 2016 NUCLEAR FACILITIES - ELECTRICAL EQUIPMENT IMPORTANT TO SAFETY - QUALIFICATION
    BS EN 60216-6:2006 Electrical insulating materials. Thermal endurance properties Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
    IEC TR 62392:2006 Suitability of typical electrical insulating material (EIM) for polymer recycling
    PD 6524:1989 GUIDE TO SPECIFYING PERMISSIBLE TEMPERATURE AND TEMPERATURE RISE FOR PARTS OF ELECTRICAL EQUIPMENT, IN PARTICULAR FOR TERMINALS
    I.S. EN 60216-3:2006 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 3: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS
    ASTM D 2756 : 2007 : R2017 Standard Test Method for Weight Loss of Electrical Insulating Varnishes
    I.S. EN 60137:2017 INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V
    BIS IS 8504-6 : 2012 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF RELATIVE THERMAL ENDURANCE INDEX (RTE) OF AN INSULATING MATERIAL
    IEC TS 62332-1:2011 Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 1: General requirements
    IEC 60137 REDLINE : 7ED 2017 INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V
    NF EN 60216-5 : 2008 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 5: DETERMINATION OF RELATIVE THERMAL ENDURANCE INDEX (RTE) OF AN INSULATING MATERIAL
    CSA C22.2 No. 0.17 : 2000 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
    IEC TS 62332-3:2016 Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 3: Hermetic motor-compressors
    09/30206527 DC : 0 BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
    BIS IS/IEC 60079-0 : 2011 EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
    I.S. EN 61212-2:2006 INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
    IEC 60137:2017 RLV Insulated bushings for alternating voltages above 1000 V
    ISA 61241-0 : 2006 ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS
    BS 2757:1986 METHOD FOR DETERMINING THE THERMAL CLASSIFICATION OF ELECTRICAL INSULATION
    BS 5691-1:1995 GUIDE FOR THE DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - GENERAL GUIDELINES FOR AGEING PROCEDURES AND EVALUATION OF TEST RESULTS
    IEC/IEEE 60780-323:2016 Nuclear facilities - Electrical equipment important to safety - Qualification
    BS EN 60079-7 : 2015 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015)
    BS EN 60216-5:2008 Electrical insulating materials. Thermal endurance properties Determination of relative thermal endurance index (RTE) of an insulating material
    UNE-EN 50618:2015 Electric cables for photovoltaic systems
    BS EN 50618:2014 ELECTRIC CABLES FOR PHOTOVOLTAIC SYSTEMS (BT(DE/NOT)258)
    08/30184920 DC : DRAFT JULY 2008 BS EN 60034-18-31 - ROTATING ELECTRICAL MACHINES - PART 18-31: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - THERMAL EVALUATION AND CLASSIFICATION OF INSULATION SYSTEMS USED IN ROTATING MACHINES
    UNE-EN 60137:2011 Insulated bushings for alternating voltages above 1 000 V
    08/30176905 DC : DRAFT JAN 2008 BS EN 60684-2 - FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
    14/30278882 DC : 0 BS EN 60079-7 IEC 60079-7 ED. 5.0 - EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
    DD IEC/TS 62332-1:2011 Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components General requirements
    ASTM D 2671 : 2013 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
    02/207211 DC : DRAFT JULY 2002 IEC 60085 ED.3.0 - THERMAL EVALUATION AND CLASSIFICATION OF ELECTRICAL INSULATION
    15/30330425 DC : 0 BS EN 60370 ED 2.0 - TEST PROCEDURE FOR THERMAL ENDURANCE OF INSULATING RESINS AND VARNISHES FOR IMPREGNATION PURPOSES - ELECTRIC BREAKDOWN METHODS
    DWA-M 612:2018 TEST METHODS OF SAMPLING AND TESTING PULPS TO BE USED IN THE MANUFACTURE OF ELECTRICAL INSULATION
    15/30329267 DC : 0 BS EN 60747-17 - SEMICONDUCTOR DEVICES - PART 17: MAGNETIC AND CAPACITIVE COUPLER FOR BASIC AND REINFORCED ISOLATION
    BS EN 60684-2:2011 Flexible insulating sleeving Methods of test
    NF EN 60216-6 : 2006 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD
    I.S. EN 60079-7:2015 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
    BS EN 60137:2017 INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V
    CSA E60079.0 : 2002 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - GENERAL REQUIREMENTS
    I.S. EN 60454-2:2007 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
    IEEE 98-2002 IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials
    IEC TS 62446-3:2017 Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 3: Photovoltaic modules and plants - Outdoor infrared thermography
    CEI EN 60747-5-2 : 2002 DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-2: OPTOELECTRONIC DEVICES - ESSENTIAL RATINGS AND CHARACTERISTICS
    IEC 60076-12:2008 Power transformers - Part 12: Loading guide for dry-type power transformers
    IEC 61241-1-1:1999 Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus
    IEC 60216-8:2013 Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures
    IEC TS 60216-7-1:2015 Electrical insulation materials - Thermal endurance properties - Part 7-1: Accelerated determination of relative thermal endurance using analytical test methods (RTEA) - Instructions for calculations based on activation energy
    UNE-EN 62109-1:2011 Safety of power converters for use in photovoltaic power systems -- Part 1: General requirements
    BS PD IEC TS 62788-2 : 2017 MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 2: POLYMERIC MATERIALS - FRONTSHEETS AND BACKSHEETS
    00/243909 DC : DRAFT AUG 2000 IEC 61730-1 - PHOTOVOLTAIC MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
    BS 223:1985 SPECIFICATION FOR BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V
    EN 50281-1-1 : 98 AMD 1 2002 ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING
    ASTM D 3377 : 2004 : R2013 Standard Test Method for Weight Loss of Solventless Varnishes
    CSA C22.2 No. 62109-1 : 2016 SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
    06/30159335 DC : 0 BS EN 60216-5 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 5: DETERMINATION OF RELATIVE THERMAL ENDURANCE INDEX (RTE) OF AN INSULATING MATERIAL
    BS EN 60747-5-2:2001 DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-2: OPTOELECTRONIC DEVICES - ESSENTIAL RATINGS AND CHARACTERISTICS
    09/30198417 DC : DRAFT JAN 2009 BS EN 60505 - EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS
    PD IEC/TS 62332-3:2016 ELECTRICAL INSULATION SYSTEMS (EIS) - THERMAL EVALUATION OF COMBINED LIQUID AND SOLID COMPONENTS - PART 3: HERMETIC MOTOR-COMPRESSORS
    BIS IS 8504-4 : 2013 ELECTRICAL INSULATING MATERIALS- THERMAL ENDURANCE PROPERTIES - PART 4: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS
    I.S. EN 60684-2:2011 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011)
    14/30304003 DC : 0 BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES
    11/30246689 DC : 0 BS EN 60216-8 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES
    BS EN 61241-0:2006 (published 2007-01) Electrical apparatus for use in the presence of combustible dust General requirements
    12/30263544 DC : 0 BS EN 60216-1 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS
    BS EN 60505:2011 Evaluation and qualification of electrical insulation systems
    DIN ISO 5630-4:2016-10 (Draft) PAPER AND BOARD - ACCELERATED AGEING - PART 4: DRY HEAT TREATMENT AT 120 OR 150 DEGREES C (ISO 5630-4:1986)
    IEC 60079-7:2015+AMD1:2017 CSV Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
    CEI EN 60216-6 : 2007 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD
    15/30249614 DC : 0 BS IEC/IEEE 60780-323 ED 1.0 - NUCLEAR FACILITIES - ELECTRICAL EQUIPMENT IMPORTANT TO SAFETY - QUALIFICATION
    PD IEC/TS 62332-2:2014 Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components Simplified test
    NF EN 60454-2 : 2013 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
    16/30318517 DC : 0 BS EN 60137 ED. 7.0 - INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V
    CSA E61347.1 : 2003 : R2013 LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
    IEC 60079-0:2017 Explosive atmospheres - Part 0: Equipment - General requirements
    DIN EN 50021 : 2000 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - TYPE OF PROTECTION "N"
    C22.2 NO. 213-17 Nonincendive electrical equipment for use in Class I and II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locations (Binational standard with UL 121201)
    CSA C22.2 No. 60079-7 : 2016 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
    I.S. EN 61241-1:2004 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD"
    I.S. EN 60216-8:2013 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES (IEC 60216-8:2013 (EQV))
    I.S. EN 60216-1:2013 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS (IEC 60216-1:2013 (EQV))
    ISA 61241-1 : 2006 ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY ENCLOSURES "TD"
    BIS IS 8504-1 : 2012 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS
    BS IEC 62899-201 : 2016 PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES
    ASTM D 3377 : 2004 : R2009 Standard Test Method for Weight Loss of Solventless Varnishes
    I.S. EN 60780-323:2017 NUCLEAR FACILITIES - ELECTRICAL EQUIPMENT IMPORTANT TO SAFETY - QUALIFICATION
    I.S. EN 60216-6:2004 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD
    I.S. EN 60747-5-5:2011 SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS
    CEI EN 60505 : 2012 EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS
    BS EN 60216-3-2:1995 GUIDE FOR THE DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS - CALCULATIONS FOR INCOMPLETE DATA: PROOF TEST RESULTS UP TO AND INCLUDING THE MEDIAN TIME TO END-POINT (EQUAL TEST GROUPS)
    NF EN 60674-2 : 98 AMD 1 2002 SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
    CEI EN 60216-1 : 2014 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS
    I.S. EN 61241-0:2006 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
    IEC 60034-18-22:2000 Rotating electrical machines - Part 18-22: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions
    BS EN ISO 2578:1999 Plastics. Determination of the time-temperature limits after prolonged exposure to heat
    IEC 61241-1:2004 Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"
    IEC 60747-5-5:2007+AMD1:2013 CSV Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices - Photocouplers
    ISO 2578:1993 Plastics Determination of time-temperature limits after prolonged exposure to heat
    UL 121201 : 9ED 2017 NONINCENDIVE ELECTRICAL EQUIPMENT FOR USE IN CLASS 1 AND 2, DIVISION 2 AND CLASS 3, DIVISIONS 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS
    UNE-EN 60079-0:2013 Explosive atmospheres - Part 0: Equipment - General requirements
    BS EN 62109-1:2010 Safety of power converters for use in photovoltaic power systems General requirements
    IEC 60505:2011 Evaluation and qualification of electrical insulation systems
    IEC 61212-2:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test
    IEC 60454-2:2007 Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test
    IEC 60216-6:2006 Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
    IEC 60684-2:2011 Flexible insulating sleeving - Part 2: Methods of test
    IEC TS 62788-2:2017 Measurement procedures for materials used in photovoltaic modules - Part 2: Polymeric materials - Frontsheets and backsheets
    IEC 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
    IEC 60216-3:2006 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
    IEC 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
    05/30134569 DC : DRAFT JUN 2005 IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
    IEC 60747-5-2:1997+AMD1:2002 CSV Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics
    EN 62109-1 : 2010 SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
    EN 50618:2014 Electric cables for photovoltaic systems
    EN ISO 11248 : 1999 Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993)
    EN ISO 2578 : 1998 PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT
    ASTM D 2756 : 2007 Standard Test Method for Weight Loss of Electrical Insulating Varnishes
    EN 60780-323 : 2017 Nuclear facilities - Electrical equipment important to safety - Qualification
    DD IEC/PAS 60747-17:2011 SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 17: MAGNETIC AND CAPACITIVE COUPLER FOR BASIC AND REINFORCED ISOLATION
    BS 5691-3.1:1995 GUIDE FOR THE DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS - CALCULATIONS USING MEAN VALUES OF NORMALLY DISTRIBUTED COMPLETE DATA
    02/205209 DC : DRAFT JULY 2002 IEC 61241-1 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES 'TD'
    CEI EN 60684-2 : 2012 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
    EN 60216-3:2006 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 3: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS
    BS EN 60454-2:2007 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
    16/30350588 DC : 0 BS PD IEC/TS 62446-3 ED 1.0 - PHOTOVOLTAIC (PV) SYSTEMS - REQUIREMENTS FOR TESTING, DOCUMENTATION AND MAINTENANCE - PART 3: OUTDOOR INFRARED THERMOGRAPHY OF PHOTOVOLTAIC MODULES AND PLANTS
    DIN IEC 60085 : 1993 THERMAL EVALUATION AND CLASSIFICATION OF ELECTRICAL INSULATION
    CEI EN 60216-5 : 2012 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 5: DETERMINATION OF RELATIVE THERMAL ENDURANCE INDEX (RTE) OF AN INSULATING MATERIAL
    NF EN 60505 : 2011 EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS
    BS EN 60216-3:2006 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 3: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS
    IEC 60137:2017 Insulated bushings for alternating voltages above 1000 V
    CSA E61347.1 :2003 LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
    CSA E60079.15 : 2002 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL APPARATUS WITH TYPE OF PROTECTION "n"
    CEI EN 60216-8 : 2014 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES
    BIS IS 8504-7 : 2012 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 7: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD
    IEC 60216-3-1:1990 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 3: Instructions for calculating thermal endurance characteristics - Section 1: Calculations using mean values of normally distributed complete data
    CEI EN 60137 : 2009 INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V
    BS EN 60079-0 : 2012 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
    IEC PAS 60747-17:2011 Semiconductor devices - Discrete devices - Part 17: Magnetic and capacitive coupler for basic and reinforced isolation
    NF EN 60747-5-5 : 2012 AMD 1 2015 SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS
    ASTM D 3377 : 2004 : R2018 Standard Test Method for Weight Loss of Solventless Varnishes
    EN 60747-5-5:2011/A1:2015 SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS (IEC 60747-5-5:2007/A1:2013)
    ISO 11248:1993 Plastics Thermosetting moulding materials Evaluation of short-term performance at elevated temperatures
    IEC 62109-1:2010 Safety of power converters for use in photovoltaic power systems - Part 1: General requirements
    03/314451 DC : DRAFT SEP 2003 IEC 62392 TR ED.1 - SUITABILITY OF TYPICAL ELECTRICAL INSULATING MATERIAL FOR POLYMER RECYCLING
    BS EN 61212-2:2006 Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Methods of test
    IEC 60079-0:2017 RLV Explosive atmospheres - Part 0: Equipment - General requirements
    EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
    DIN ISO 5630-4:2017-03 PAPER AND BOARD - ACCELERATED AGEING - PART 4: DRY HEAT TREATMENT AT 120 OR 150 DEGREES C (ISO 5630-4:1986)
    EN 60216-8:2013 Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures
    EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
    EN 61241-0:2006 Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
    IEC 60216-6:2006 Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
    ISO 1520:2006 Paints and varnishes Cupping test
    IEC 60450:2004+AMD1:2007 CSV Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
    IEC 60370:1971 Test procedure for thermal endurance of insulating varnishes - Electric strength method
    ISO 8256:2004 Plastics Determination of tensile-impact strength
    ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
    IEC 60172:2015 Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
    ISO 179-1:2010 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
    ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
    IEC 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
    ISO 527-3:1995 Plastics Determination of tensile properties Part 3: Test conditions for films and sheets
    IEC 61033:1991 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
    ISO 178:2010 Plastics Determination of flexural properties
    ISO 2759:2014 Board Determination of bursting strength
    IEC 60216-3:2006 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective