• IEC 60335-2-45:2002+AMD1:2008+AMD2:2011 CSV

    Current The latest, up-to-date edition.

    Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French

    Published date:  30-01-2012

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Definitions
    4 General requirement
    5 General conditions for the tests
    6 Classification
    7 Marking and instructions
    8 Protection against access to live parts
    9 Starting of motor-operated appliances
    10 Power input and current
    11 Heating
    12 Void
    13 Leakage current and electric strength at operating
       temperature
    14 Transient overvoltages
    15 Moisture resistance
    16 Leakage current and electric strength
    17 Overload protection of transformers and associated
       circuits
    18 Endurance
    19 Abnormal operation
    20 Stability and mechanical hazards
    21 Mechanical strength
    22 Construction
    23 Internal wiring
    24 Components
    25 Supply connection and external flexible cords
    26 Terminals for external conductors
    27 Provision for earthing
    28 Screws and connections
    29 Clearances, creepage distances and solid insulation
    30 Resistance to heat and fire
    31 Resistance to rusting
    32 Radiation, toxicity and similar hazards
    Annexes
    Bibliography

    Abstract - (Show below) - (Hide below)

    IEC 60335-2-45:2002+A1:2008+A2:2011 deals with the safety of portable electric heating tools and similar appliances, their rated voltage being not more than 250 V. Examples of appliances that are within the scope of this standard are branding tools; burning-in pens; conduit-soldering tools; dehorning tools; desoldering irons; firelighters; glue guns; heat guns; paint strippers; plastic-cutting tools; soldering guns; soldering irons; stripping pliers and thermoplastic conduit-welding tools.

    This publication is to be read in conjunction with IEC 60335-1:2010.

    This consolidated version consists of the third edition (2002), its amendment 1 (2008) and its amendment 2 (2011). Therefore, no need to order amendments in addition to this publication.

    General Product Information - (Show below) - (Hide below)

    Committee TC 61
    Development Note To be used in conjunction with IEC 60335-1. (11/2002) Stability Date: 2017. (09/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ISO 12176-2:2008 Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
    08/30191453 DC : DRAFT OCT 2008 BS EN 50527-1 - ASSESSMENT OF HUMAN EXPOSURE AT THE WORKPLACE FOR PERSONS BEARING ACTIVE IMPLANTABLE MEDICAL DEVICES (AIMD) IN ELECTRIC, MAGNETIC AND ELECTROMAGNETIC FIELDS WITH FREQUENCIES FROM 0 HZ TO 300 GHZ - PART 1: GENERAL
    BS EN 60745-1 : 2009 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    CEI EN 50499 : 2009 PROCEDURE FOR THE ASSESSMENT OF THE EXPOSURE OF WORKERS TO ELECTROMAGNETIC FIELDS
    17/30365898 DC : 0 BS EN 50499 - PROCEDURE FOR THE ASSESSMENT OF THE EXPOSURE OF WORKERS TO ELECTROMAGNETIC FIELDS
    CSA C22.2 No. 60745.2.11 : 2004 : INC : AMD 1 : 2009 : R2013 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR RECIPROCATING SAWS
    NBR ISO 12176-2 : 2017 PLASTICS PIPES AND FITTINGS - EQUIPMENT FOR FUSION JOINTING POLYETHYLENE SYSTEMS - PART 2: ELECTROFUSION
    07/30152755 DC : 0 BS ISO 12176-2 - PLASTICS PIPES AND FITTINGS - EQUIPMENT FOR FUSION JOINTING POLYETHYLENE SYSTEMS - PART 2: ELECTROFUSION
    BS ISO 12176-2:2008 (published 2008-09) Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems Electrofusion
    NBR IEC 61892-3 : 2013 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENTS
    NF EN 50499 : 2009 PROCEDURE FOR THE ASSESSMENT OF THE EXPOSURE OF WORKERS TO ELECTROMAGNETIC FIELDS
    CSA C22.2 No. 60745.2.1 : 2004 : INC : AMD 1 : 2010 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-1: PARTICULAR REQUIREMENTS FOR DRILLS AND IMPACT DRILLS
    BS EN 50499 : 2008 PROCEDURE FOR THE ASSESSMENT OF THE EXPOSURE OF WORKERS TO ELECTROMAGNETIC FIELDS
    PREN 50499 : DRAFT 2017 PROCEDURE FOR THE ASSESSMENT OF THE EXPOSURE OF WORKERS TO ELECTROMAGNETIC FIELDS
    CSA C22.2 No. 60745.2.8 : 2004 : INC : AMD 1 : 2009 : R2013 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-8: PARTICULAR REQUIREMENTS FOR SHEARS AND NIBBLERS
    CSA C22.2 No. 60745.2.21 :2005 : INC : AMD 1 : 2009 : R2014 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-21: PARTICULAR REQUIREMENTS FOR DRAIN CLEANERS
    CSA C22.2 No. 60745.2.21 :2005 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-21: PARTICULAR REQUIREMENTS FOR DRAIN CLEANERS
    NBR 11793 : 1990 FERRAMENTAS ELETRICAS PORTATEIS OPERADAS A MOTOR - REQUISITOS DE SEGURANCA
    CSA C22.2 No. 60745.2.8: 2004 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-8: PARTICULAR REQUIREMENTS FOR SHEARS AND NIBBLERS
    I.S. EN 62841-1:2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60745.2.1 : 2004 : INC : AMD 1 : 2010 : FR HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-1: PARTICULAR REQUIREMENTS FOR DRILLS AND IMPACT DRILLS
    I.S. EN 50499:2008 PROCEDURE FOR THE ASSESSMENT OF THE EXPOSURE OF WORKERS TO ELECTROMAGNETIC FIELDS
    CSA C22.2 No. 60745.2.9 : 2004 : INC : AMD 1 : 2009 : R2013 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-9: PARTICULAR REQUIREMENTS FOR TAPPERS
    CSA C22.2 No. 60745.2.1:2004 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-1: PARTICULAR REQUIREMENTS FOR DRILLS AND IMPACT DRILLS
    CSA C22.2 No. 60745.2.1 : 2004 : INC : AMD 1 : 2010 : R2013 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-1: PARTICULAR REQUIREMENTS FOR DRILLS AND IMPACT DRILLS
    CSA C22.2 No. 60745.2.9 : 2004 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-9: PARTICULAR REQUIREMENTS FOR TAPPERS
    CSA C22.2 No. 60745.2.11 : 2004 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR RECIPROCATING SAWS
    I.S. EN 60745-1:2009 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    IEC 60745-2-21:2002+AMD1:2008 CSV Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners
    12/30272980 DC : 0 BS EN 6XXXX-1 - ELECTRIC MOTOR-OPERATED HAND-HELD, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 : FR HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    UNE-EN 62841-1:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements
    IEC 60745-1:2006 Hand-held motor-operated electric tools - Safety - Part 1: General requirements
    CSA C22.2 No. 60745.1 : 2007 : INC : UPD 3 : 2013 : R201200 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60745.1 : 2007 : R2012 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    CAN/CSA-C22.2 No. 62841-1 : 2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    IEC 60745-2-4:2002+AMD1:2008 CSV Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
    CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 : R2012 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60745.1 : 2007 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    UL 60745-1 : 4 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60745.1 : 2007 (R2017) HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    BS EN 62841-1 : 2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    EN 60745-1:2009/A11:2010 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60745.2.14 :2004 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-14: PARTICULAR REQUIREMENTS FOR PLANERS
    EN 60745-1:2006 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60745.2.6 : 2004 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR HAMMERS
    CSA C22.2 No. 60745.2.4 : 2004 : INC : AMD 1 : 2009 : R2013 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-4: PARTICULAR REQUIREMENTS FOR SANDERS AND POLISHERS OTHER THAN DISK TYPE
    CSA C22.2 No. 60745.2.6 : 2004 : INC : AMD 2 : 2009 : R2013 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR HAMMERS
    CSA C22.2 No. 60745.2.14 : 2004 : INC : AMD 2 : 2011 : R2013 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-14: PARTICULAR REQUIREMENTS FOR PLANERS
    CSA C22.2 No. 60745.2.4 : 2004 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-4: PARTICULAR REQUIREMENTS FOR SANDERS AND POLISHERS OTHER THAN DISK TYPE
    CSA C22.2 No. 60745.2.4 : 2004 : R2013 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-4: PARTICULAR REQUIREMENTS FOR SANDERS AND POLISHERS OTHER THAN DISK TYPE
    EN 62841-1:2015/AC:2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    EN 50499:2008 Procedure for the assessment of the exposure of workers to electromagnetic fields

    Standards Referencing This Book - (Show below) - (Hide below)

    CISPR 14-1:2016 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
    IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
    IEC 60252:1993 A.C. motor capacitors
    IEC 60320-1:2015 Appliance couplers for household and similar general purposes - Part 1: General requirements
    IEC 60238:2016+AMD1:2017 CSV Edison screw lampholders
    IEC 60738-1:2006+AMD1:2009 CSV Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification
    IEC 60384-14:2013+AMD1:2016 CSV Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
    IEC 60950:1999 Safety of information technology equipment
    ISO 13732-1:2006 Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces
    CISPR 14-2:2015 RLV Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
    IEC 60320-2-3:1998+AMD1:2004 CSV Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0
    ISO 1463:2003 Metallic and oxide coatings Measurement of coating thickness Microscopical method
    IEC 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
    IEC 60695-2-13:2010+AMD1:2014 CSV Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials
    IEC 60999-1:1999 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
    IEC 60249-2-4:1987 Base materials for printed circuits. Part 2: Specifications. Specification No. 4: Epoxide woven glass fabric copper-clad laminated sheet, general purpose grade
    IEC 60249-2-5:1987 Base materials for printed circuits. Part 2: Specifications. Specification No. 5: Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)
    IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
    IEC 60051-2:1984 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2: Special requirements for ammeters and voltmeters
    IEC 61180-2:1994 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
    IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
    IEC 60695-2-12:2010+AMD1:2014 CSV Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials
    IEC 60998-2-2:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
    IEC 61643-1:2005 Low-voltage surge protective devices - Part 1: Surge protective devices connected to low-voltage power distribution systems - Requirements and tests
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    ISO 9772:2012 Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame
    IEC 61058-1:2016 Switches for appliances - Part 1: General requirements
    IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
    IEC 60598-1:2014+AMD1:2017 CSV Luminaires - Part 1: General requirements and tests
    IEC 60061-1:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
    IEC 60906-1:2009 IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c.
    ISO 2178:2016 Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method
    IEC 60335-2-29:2016 Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
    IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
    IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
    IEC 60664-3:2016 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
    CISPR 11:2015 RLV Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
    IEC 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
    IEC 61180-1:1992 High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements
    ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
    IEC 61032:1997 Protection of persons and equipment by enclosures - Probes for verification
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    IEC 60998-2-1:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
    IEC 60990:2016 Methods of measurement of touch current and protective conductor current
    IEC 61000-3-2 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
    IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective