IEC 60364-4-41:2005+AMD1:2017 CSV

Current

Current The latest, up-to-date edition.

Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s):

Published date: 17-03-2017

Publisher: International Electrotechnical Committee

Abstract - (Show below) - (Hide below)

IEC 60364-4-41:2005+A1:2017 specifies essential requirements regarding protection against electric shock of persons and livestock. It deals also with the application and co-ordination of these requirements in relation to external influences. Requirements are also given for the application of additional protection in certain cases.
The contents of the corrigendum of February 2018 have been included in this copy.
This consolidated version consists of the first edition (2005) and its amendment 1 (2017). Therefore, no need to order amendment in addition to this publication.

General Product Information - (Show below) - (Hide below)

Committee	TC 64
Development Note	Supersedes IEC 60364-3-1 (03/2001) Supersedes IEC 60364-4-46, IEC 60364-4-47, IEC 60364-4-48-481 (01/2002) Stability Date: 2020. (03/2017)
Document Type	Standard
ISBN
Pages
Published
Publisher	International Electrotechnical Committee
Status	Current
Supersedes	IEC 60364-4-41:2001 IEC 60364-2:1970 IEC 60364-4-46:1981

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
HD 60364-4-41:2017/A11:2017	Identical
JIS C 60364-4-41:2010	Identical
UNE-HD 60364-4-41:2010	Identical
VDE 0100-410 : 2018-10	Identical
VDE 0100-410 : 2007	Identical
I.S. HD 60364-4-41:2007	Identical
SAC GB 16895.21 : 2004	Identical
HD 384.4.41 S2:1996/A1:2002	Similar to
DIN VDE 0800-2 : 1985	Corresponds
BS 7671:1992	Similar to
DIN VDE 0800-1 : 1989	Corresponds
DIN VDE 0100-410 : 1997	Corresponds
I.S. HD 384.4.41:1998	Identical
UNE 20460-4-41:1998	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

I.S. HD 60364-7-753:2014	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-753: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - HEATING CABLES AND EMBEDDED HEATING SYSTEMS
I.S. HD 60364-4-42:2011	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS
I.S. HD 384-7-708:2005	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SECTION 708: ELECTRICAL INSTALLATIONS IN CARAVAN PARKS
I.S. EN 62838:2016	LEDSI LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES NOT EXCEEDING 50 V A.C. R.M.S. OR 120 V RIPPLE FREE D.C. - SAFETY SPECIFICATIONS
IEC 60898-1:2015	Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
I.S. EN 60439-4:2004	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 4: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR CONSTRUCTION SITES (ACS)
I.S. EN 50491-6-1:2014	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 6-1: HBES INSTALLATIONS - INSTALLATION AND PLANNING
EN 61439-1:2011	Low-voltage switchgear and controlgear assemblies - Part 1: General rules
DIN VDE 0800-1 : 1989	TELECOMMUNICATIONS - GENERAL CONCEPTS - REQUIREMENTS AND TESTS FOR THE SAFETY OF FACILITIES AND APPARATUS
IEC 60364-6:2016	Low voltage electrical installations - Part 6: Verification
S.R. HD 60364-5-557:2013	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-557: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - AUXILIARY CIRCUITS
IEC TR 61439-0:2013	Low-voltage switchgear and controlgear assemblies - Part 0: Guidance to specifying assemblies
CSA ISO/IEC 15018 : 2005 : R2010	INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
CSA ISO/IEC 15018:2005	INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
CSA ISO/IEC 15018 : 2005 : INC : AMD 1 : 2010 : R201000	INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
S.R. HD 60364-4-42:2011	LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS
S.R. HD 60364-5-51:2009	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
I.S. EN ISO 18246:2017	ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY (ISO 18246:2015)
I.S. EN 62282-5-1:2012	FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012 (EQV))
I.S. EN 12649:2008	CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
I.S. HD 60364-7-702:2010	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-702: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SWIMMING POOLS AND FOUNTAINS
I.S. HD 60364-7-715:2005	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-715: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXTRA-LOW-VOLTAGE LIGHTING INSTALLATIONS (IEC 60364-7-715:2011 (MOD))
I.S. EN 61010-2-201:2013	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-201: PARTICULAR REQUIREMENTS FOR CONTROL EQUIPMENT (IEC 61010-2-201:2013 (EQV))
S.R. HD 60364-7-715:2012	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-715: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXTRA-LOW-VOLTAGE LIGHTING INSTALLATIONS
I.S. EN 60950-1:2006	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD))
I.S. EN 60309-2:1999	PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 2: DIMENSIONAL INTERCHANGEABILITY REQUIREMENTS FOR PIN AND CONTACT-TUBE ACCESSORIES (IEC 60309-2:1999 (EQV))
I.S. EN 61347-1:2015	LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
S.R. HD 60364-7-729:2009	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-729: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - OPERATING OR MAINTENANCE GANGWAYS
I.S. EN 62271-212:2017	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 212: COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATION (CEADS)
BS ISO 13577-1:2016	INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 60204-11 : 2001	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
BS EN 61241-14:2004	Electrical apparatus for use in the presence of combustible dust Selection and installation
ISO/IEC 18010:2002	Information technology Pathways and spaces for customer premises cabling
ISO/TS 22559-2:2010	Safety requirements for lifts (elevators) Part 2: Safety parameters meeting the global essential safety requirements (GESRs)
IEC 60364-4-42:2010+AMD1:2014 CSV	Low-voltage electrical installations - Part 4-42: Protection forsafety - Protection against thermal effects
NF EN 62282-5-1 : 2007	FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY
BS EN 50122-1 : 2011	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK
EN IEC 62485-2:2018	Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
IEC 60669-1 REDLINE : 4ED 2017	SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 61980-1 : 2016	ELECTRIC VEHICLE WIRELESS POWER TRANSFER (WPT) SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 50522:2010	EARTHING OF POWER INSTALLATIONS EXCEEDING 1 KV A.C.
IEC 61851-1:2017	Electric vehicle conductive charging system - Part 1: General requirements
BS EN 62026-2:2013	Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) Actuator sensor interface (AS-i)
NFPA 79 : 2018	ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY
EN 61535:2009/A1:2013	INSTALLATION COUPLERS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS (IEC 61535:2009/A1:2012)
DIN ISO 8528-7:1997-11	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 7: TECHNICAL DECLARATIONS FOR SPECIFICATION AND DESIGN
DIN EN 746-3:2010-02	Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases (includes Amendment A1:2009)
DIN EN 500-1:2010-05	Mobile road construction machinery - Safety - Part 1: Common requirements (includes Amendment A1:2009)
BS EN 60519-1:2015	Safety in installations for electroheating and electromagnetic processing General requirements
08/30177777 DC : DRAFT FEB 2008	BS EN 62548 - INSTALLATION AND SAFETY REQUIREMENTS FOR PHOTOVOLTAIC (PV) GENERATORS
15/30319022 DC : 0	BS EN 60990 ED 3.0 - METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
01/219351 DC : DRAFT JAN 2001	IEC 60364-5-53/A1 ED.2 - ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
13/30280057 DC : 0	BS EN 13782 - TEMPORARY STRUCTURE - TENTS - SAFETY
17/30356606 DC : 0	BS ISO 8100-1 - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 1: SAFETY REQUIREMENTS FOR PASSENGER AND GOODS PASSENGER LIFTS
BS 3535-1:1990	ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - GENERAL REQUIREMENTS
95/107917 DC : 0	MACHINERY AND PLANT FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
BS EN 61851-21:2002	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - ELECTRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A.C/D.C. SUPPLY
UNE-EN 62271-212:2017	High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS)
09/30162904 DC : 0	BS EN 61204-3 - LOW-VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
BS EN 50272-3:2002	Safety requirements for secondary batteries and battery installations Traction batteries
06/30158289 DC : 0	BS EN 62040-1 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS
10/30218813 DC : 0	BS EN 61439-4 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 4: ASSEMBLIES FOR CONSTRUCTION SITES (ACS)
BS EN 1398:2009	DOCK LEVELLERS - SAFETY REQUIREMENTS
04/30115657 DC : DRAFT JUNE 2004	IEC 61347-2-13 ED 1 - LAMP CONTROLGEAR - PART 2: PARTICULAR REQUIREMENTS FOR D.C. FOR A.C. SUPPLIED ELECTRONIC CONTROLGEARS FOR LED MODULES
17/30293139 DC : DRAFT SEP 2017	BS IEC 60364-8-2 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 8-2: SMART LOW-VOLTAGE ELECTRICAL INSTALLATIONS
PD IEC/TR 61439-0:2013	Low-voltage switchgear and controlgear assemblies Guidance to specifying assemblies
12/30235286 DC : DRAFT APR 2012	BS EN 50153 - RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS
UNI EN 81-22 : 2014	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH
05/30136705 DC : DRAFT JUL 2005	IEC 60309-4 - PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 4: SWITCHED SOCKET-OUTLET AND CONNECTOR, WITH OR WITHOUT INTERLOCK
11/30235014 DC : 0	BS EN 13135 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
BS EN 50272-1:2010	Safety requirements for secondary batteries and battery installations General safety information
07/30159711 DC : 0	BS EN 61557-11 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 11: EFFECTIVENESS OF RESIDUAL CURRENT MONITORS (RCMS) TYPE A AND TYPE B IN TT, TN AND IT SYSTEMS
17/30346770 DC : 0	BS EN 60974-9 - ARC WELDING EQUIPMENT - PART 9: INSTALLATION AND USE
BS EN 61010-2-201:2013	Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for control equipment
BS EN IEC 61204-7:2018	Low-voltage switch mode power supplies Safety requirements
BS EN 61557-8:2015	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Insulation monitoring devices for IT systems
BS EN 12601:2010	Reciprocating internal combustion engine driven generating sets. Safety
BS IEC 62852 : 2014	CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
11/30252196 DC : 0	BS EN 61347-1:2008 + A2 - LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
UNE-EN 61140:2017	Protection against electric shock - Common aspects for installation and equipment
05/30060689 DC : DRAFT JUN 2005	IEC 62282-3-1 - FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER PLANTS - SAFETY
14/30287195 DC : 0	BS ISO 18246 - ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY
04/30125208 DC : DRAFT NOV 2004	IEC 61557-8 ED.2 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. V D.C. EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 8: INSULATION MONITORING DEVICES FOR IT SYSTEMS
08/30168069 DC : DRAFT MAR 2008	BS EN 60364-7-717 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS
UNE-EN ISO 16230-1:2016	Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015)
IEC 60439-1:1999+AMD1:2004 CSV	Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
14/30278953 DC : 0	BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
BS PD IEC TS 62996 : 2017	INDUSTRIAL ELECTROHEATING AND ELECTROMAGNETIC PROCESSING EQUIPMENT - REQUIREMENTS ON TOUCH CURRENTS, VOLTAGES AND ELECTRIC FIELDS FROM 1 KHZ TO 6 MHZ
UNE-EN 62870:2016	Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General safety requirements
15/30286010 DC : 0	BS ISO 14990-1 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
13/30238229 DC : 0	BS EN 62052-31 - ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS
08/30195433 DC : 0	BS EN 60519-1 - SAFETY IN ELECTROHEAT INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
BS EN 50491-6-1:2014	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 6-1: HBES INSTALLATIONS - INSTALLATION AND PLANNING
16/30350625 DC : 0	BS EN 62485-5 ED 1.0 - SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 5: LITHIUM-ION BATTERIES FOR STATIONARY APPLICATIONS
12/30268015 DC : 0	BS EN 62135-1 - RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION
10/30217290 DC : DRAFT FEB 2010	BS EN 60364-7-715 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-715: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXTRA-LOW-VOLTAGE LIGHTING INSTALLATIONS
BS EN 60519-11:2007	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 11: PARTICULAR REQUIREMENTS FOR INSTALLATIONS USING THE EFFECT OF ELECTROMAGNETIC FORCES ON LIQUID METALS
16/30321116 DC : 0	BS EN 60364-7-711 ED 2.0 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-711 - REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS
11/30253145 DC : 0	BS EN 62271-202 ED2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION
IEC 60990:2016	Methods of measurement of touch current and protective conductor current
PD IEC/TR 62354:2014	General testing procedures for medical electrical equipment
15/30286835 DC : 0	BS ISO 14990-2 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 2: PARTICULAR REQUIREMENTS FOR EXTERNALLY-POWERED MACHINES
PD 2754-2:1993	CLASSIFICATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO PROTECTION AGAINST ELECTRIC SHOCK - GUIDE TO REQUIREMENTS FOR PROTECTION AGAINST ELECTRIC SHOCK
14/30244780 DC : 0	BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
BS EN 61557-11:2009	Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c.. Equipment for testing, measuring or monitoring of protective measures Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems
DIN EN 12601:2011-07	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
EN 61347-1:2015	Lamp controlgear - Part 1: General and safety requirements
CEI EN 61558-2-15 : 2013	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-15: PARTICULAR REQUIREMENTS AND TESTS FOR ISOLATING TRANSFORMERS FOR THE SUPPLY OF MEDICAL LOCATIONS
EN 62052-31:2016	Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests
CLC/TR 60269-5:2011	Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses
HD 384.5.51 : 200S2	ELECTRICAL INSTALLATION OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - CHAPTER 51: COMMON RULES
EN 61241-14:2004	Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation
EN 50272-1:2010	Safety requirements for secondary batteries and battery installations - Part 1: General safety information
EN 61158-2:2014	Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
EN 50272-3 : 2002 COR 2003	SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 3: TRACTION BATTERIES
EN 61558-1:2005/A1:2009	SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
HD 384.7.708 : 2005	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SECTION 708: ELECTRICAL INSTALLATIONS IN CARAVAN PARKS
DIN VDE 0641-11 : 1992	CIRCUIT-BREAKERS FOR OVER CURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS
HD 60364-5-51:2009/A12:2017	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
IEC 61204-3:2016 RLV	Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC)
EN 60322:2001	Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction
EN 12151:2007	Machinery and plants for the preparation of concrete and mortar - Safety requirements
EN 61347-2-13:2014/A1:2017	LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES
HD 60364-7-729:2009/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-729: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - OPERATING OR MAINTENANCE GANGWAYS
HD 60364-7-717:2010/AC:2014	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS
EN 60204-11:2000/corrigendum:2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
EN 50191:2010	ERECTION AND OPERATION OF ELECTRICAL TEST EQUIPMENT
EN 61558-2-15:2012	Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests for isolating transformers for the supply of medical locations
EN 12601:2010	Reciprocating internal combustion engine driven generating sets - Safety
EN 746-3:1997+A1:2009	Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases
EN 60204-3-1:1990	Electrical equipment of industrial machines - Part 3: Particular requirements for sewing machines, units and systems
HD 60364-7-714:2012	Low-voltage electrical installations - Part 7-714: Requirements for special installations or locations - External lighting installations
EN 60990:2016	Methods of measurement of touch current and protective conductor current
EN 60519-1:2015	Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
EN 62271-212:2017	High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS)
HD 60364-5-534:2016	Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control - Clause 534: Devices for protection against transient overvoltages
EN 60669-2-5:2016	Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES)
EN 61851-1:2011	Electric vehicle conductive charging system - Part 1: General requirements
EN 61131-2:2007	Programmable controllers - Part 2: Equipment requirements and tests
HD 60364-4-42 : 2011 AMD 1 2015	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS (IEC 60364-4-42:2010/A1:2014)
EN 62253 : 2011	PHOTOVOLTAIC PUMPING SYSTEMS - DESIGN QUALIFICATION AND PERFORMANCE MEASUREMENTS
EN 61558-2-16:2009/A1:2013	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1 100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS (IEC 61558-2-16:2009/A1:2013)
HD 384.7.711 : 200S1	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-711: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS
EN 62271-202:2014/AC:2014	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014)
EN 61557-15:2014	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
EN 50428 : 2005 AMD 2 2009	SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - COLLATERAL STANDARD - SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
EN 61557-11:2009	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems
EN 62040-1-2:2003/corrigendum:2004
HD 60364-5-52:2011/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-52: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - WIRING SYSTEMS
HD 60364-7-702:2010	Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains
HD 60364-5-557:2013/A11:2016	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-557: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - AUXILIARY CIRCUITS
EN 60950-1:2006/A2:2013	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED)
EN 60439-4:2004	Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
HD 60364-4-43:2010	Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
EN 12649:2008+A1:2011	Concrete compactors and smoothing machines - Safety
HD 60364-5-54:2011/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
DIN EN 60204-3-1 : 1993	ELECTRICAL EQUIPMENT OF INDUSTRIAL MACHINES - PART 3: PARTICULAR REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
HD 60364-5-559:2012/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-559: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - LUMINAIRES AND LIGHTING INSTALLATIONS
CLC/TS 62081:2002	Arc welding equipment - Installation and use
ISO 17842-1:2015	Safety of amusement rides and amusement devices — Part 1: Design and manufacture
I.S. EN 45510-2-9:2008	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS
BS EN 13135 : 2013	CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
I.S. EN 61241-14:2004	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 14: SELECTION AND INSTALLATION
S.R. HD 60364-5-534:2016	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - ISOLATION, SWITCHING AND CONTROL - CLAUSE 534: DEVICES FOR PROTECTION AGAINST TRANSIENT OVERVOLTAGES
I.S. EN 12151:2007	MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
ISO/TS 19880-1:2016	Gaseous hydrogen Fuelling stations Part 1: General requirements
I.S. HD 384-7-754:2005	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SECTION 754: ELECTRICAL INSTALLATIONS IN CARAVANS AND MOTOR-CARAVANS
CSA C22.2 No. 60601.1 : 2014	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
I.S. EN 62477-1:2012	SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL
I.S. EN ISO 16230-1:2015	AGRICULTURAL MACHINERY AND TRACTORS - SAFETY OF HIGHER VOLTAGE ELECTRICAL AND ELECTRONIC COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS (ISO 16230-1:2015)
EN IEC 61204-7:2018	Low-voltage switch mode power supplies - Part 7: Safety requirements
BS EN 62852:2015	Connectors for DC-application in photovoltaic systems. Safety requirements and tests
IEC 60898:1995	Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations
I.S. EN 62485-3:2014	SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 3: TRACTION BATTERIES
IEC 61204-3 REDLINE : 3ED 2016	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
EN 50174-2 : 2009 AMD 2 2014	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
IEC 60364-7-717:2009	Low-voltage electrical installations - Part 7-717: Requirements for special installations or locations - Mobile or transportable units
CSA E61558.1:2012	SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
S.R. HD 60364-6:2016	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 6: VERIFICATION
IEC 60364-4-444:1996	Electrical installations of buildings - Part 4: Protection for safety - Section 444: Protection against electromagnetic interferences (EMI) in installations of buildings
CAN/CSA-E61558-1:12 (R2017)	Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests (Adopted IEC 61558- 1:1997 + A1:1998, edition 2.1, 2009-04 with Canadian deviations) \| Sécurité des transformateurs, alimentations, bobines d\'inductance et produits analogues - Partie 1: Exigences générales et essais (norme CEI 61558-1:1997 + A1:1998 adoptée, édition 2.1, 2009-04 avec exigences propres au Canada)
IEC 60322:2001	Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction
I.S. EN 50122-1:2011	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK
I.S. EN 50521:2008	CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
S.R. HD 60364-7-730:2015	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-730: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - ONSHORE UNITS OF ELECTRICAL SHORE CONNECTIONS FOR INLAND NAVIGATION VESSELS
I.S. EN 61558-2-16:2009	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
I.S. HD 60364-7-729:2009	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-729: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - OPERATING OR MAINTENANCE GANGWAYS
I.S. EN 50156-1:2015	ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
I.S. EN 60204-31:2013	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 31: PARTICULAR SAFETY AND EMC REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (IEC 60204-31:2013 (EQV))
I.S. EN 62271-202:2014	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION
I.S. HD 60364-7-701:2007	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-701: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - LOCATIONS CONTAINING A BATH OR SHOWER (IEC 60364-7-701:2006, MODIFIED)
I.S. EN 60898-1:2003	ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002 (MOD))
I.S. EN 62852:2015	CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
IEC 62026-2:2008	Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)
IEC TR 61200-704:1996	Electrical installation guide - Part 704: Construction and demolition site installations
I.S. EN IEC 62485-2:2018	SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES
I.S. HD 384.5.51:1998	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - CHAPTER 51: COMMON RULES
I.S. EN 13135:2013	CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
S.R. HD 60364-7-712:2016	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-712: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - PHOTOVOLTAIC (PV) SYSTEMS
ANSI/AAMI/IEC TIR62354:2015	GENERAL TESTING PROCEDURES FOR MEDICAL ELECTRICAL EQUIPMENT
BS EN 62271-202:2014	High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation
IEC 60598-1:2014+AMD1:2017 CSV	Luminaires - Part 1: General requirements and tests
CSA C22.2 No. 1010.1 : 0	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - GENERAL REQUIREMENTS
CEI EN 62271-212 : 1ED 2017	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 212: COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATION (CEADS)
BS EN 50174-2 : 2009	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
BS EN 50428 : 2005	SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - COLLATERAL STANDARD - SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
BS EN 50522:2010	Earthing of power installations exceeding 1 kV a.c.
BS EN 61936-1 : 2010	POWER INSTALLATIONS EXCEEDING 1 KV A.C - PART 1: COMMON RULES
BS EN 61158-2:2014	Industrial communication networks. Fieldbus specifications Physical layer specification and service definition
NF EN 50174-2 : 2009 AMD 1 2011	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
EN 81-22:2014	Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path
EN 61936-1 : 2010 AMD 1 2014	POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014)
I.S. EN 61204-7:2006	LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 7: SAFETY REQUIREMENTS
IEC 60364-5-55:2011+AMD1:2012+AMD2:2016 CSV	Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment
I.S. EN 60204-32:2008	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
EN 50310:2016	Telecommunications bonding networks for buildings and other structures
IEC 60364-7-710:2002	Electrical installations of buildings - Part 7-710: Requirements for special installations or locations - Medical locations
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60364-7-701:2006	Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower
IEC 60364-7-729:2007	Low-voltage electrical installations - Part 7-729: Requirements for special installations or locations - Operating or maintenance gangways
I.S. EN 62040-1-2:2004
IEC 60364-4-43:2008	Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
IEC 61936-1:2010+AMD1:2014 CSV	Power installations exceeding 1 kV a.c. - Part 1: Common rules
IEC 62485-2:2010	Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
IEC 60364-1:2005	Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
I.S. EN 60077-1:2017	RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES
I.S. EN 61800-5-1:2007	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY
IEC 60077-1 REDLINE : 2ED 2017	RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES
IEC 60364-7-711 REDLINE : 2ED 2018	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-711: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS
IEC 61991:2000	Railway applications - Rolling stock - Protective provisions against electrical hazards
IEC 60204-33:2009	Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
IEC 60364-7-712:2017	Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems
DIN EN 1398:2009-07	DOCK LEVELLERS - SAFETY REQUIREMENTS
DIN EN 746-1:2010-02	Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment (includes Amendment A1:2009)
NF EN 62026-2 : 2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I)
DIN EN 81-20 E : 2014	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
DIN 40108:2003-06	ELECTRIC POWER TECHNOLOGY - CURRENT SYSTEMS - CONCEPTS, QUANTITIES, LETTER SYMBOLS
PD IEC/TS 63053:2017	General requirements for residual current operated protective devices for DC systems
BS EN ISO 18246:2017	Electrically propelled mopeds and motorcycles. Safety requirements for conductive connection to an external electric power supply
DIN EN 15011:2014-09	Cranes - Bridge and gantry cranes (includes Amendment A1:2014)
BS EN 60204-3-1:1992	ELECTRICAL EQUIPMENT FOR INDUSTRIAL MACHINES - PARTICULAR REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
15/30297998 DC : 0	BS EN 62271-212 ED 1.0 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 212: COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATION (CEADS)
IEC 61046:1993	D.C. or a.c. supplied electronic step-down convertors for filament lamps - General and safety requirements
14/30282403 DC : 0	BS ISO/IEC 30129 - APPLICATION OF EQUIPOTENTIAL BONDING AND EARTHING IN BUILDINGS WITH INFORMATION TECHNOLOGY EQUIPMENT
BS EN ISO 16230-1:2015	Agricultural machinery and tractors. Safety of higher voltage electrical and electronic components and systems General requirements
17/30370043 DC : 0	BS IEC 62026-2 AMD.1 ED.2.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I).
BS EN 61800-1:1998	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS
15/30286839 DC : 0	BS ISO 14990-3 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 3: PARTICULAR REQUIREMENTS FOR SELF-POWERED MACHINES
04/30125642 DC : DRAFT NOV 2004	IEC 61643-12 ED.2 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 12: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - SELECTION AND APPLICATION PRINCIPLES
ISO 19859:2016	Gas turbine applications Requirements for power generation
BS EN 62485-3:2014	SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 3: TRACTION BATTERIES
BS EN 60519-2:2006	Safety in electroheat installations Particular requirements for resistance heating equipment
BS EN 746-2:2010	Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems
UNE-EN 50310:2016	Telecommunications bonding networks for buildings and other structures
03/523674 DC : DRAFT APR 2003	IEC 60364-1 ED. 5.0 - ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 1: FUNDAMENTAL PRINCIPLES, ASSESSMENT OF GENERAL CHARACTERISTICS, DEFINITIONS
17/30354643 DC : 0	BS EN 62933-2-1 - ELECTRIC ENERGY STORAGE (ESS) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION
09/30205023 DC : 0	BS EN 61158-2 - INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
15/30326358 DC : 0	BS EN 60898-3 - ELECTRICAL ACCESSORIES - CIRCUIT-BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 3: CIRCUIT-BREAKERS FOR D.C. OPERATION
UNE-EN 81-20:2017	Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts
BS EN 62253:2011	Photovoltaic pumping systems. Design qualification and performance measurements
UNE-EN 61851-1:2012	Electric vehicle conductive charging system - Part 1: General requirements
06/30154990 DC : 0	BS EN 60204-32 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
UNE-EN 15869-2:2011	Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 2: Onshore unit, safety requirements
DIN EN 1987-1:1998-03	ELECTRICALLY PROPELLED ROAD VEHICLES - SPECIFIC REQUIREMENTS FOR SAFETY - PART 1: ON-BOARD ENERGY STORAGE
DIN EN 15869-2:2010-06	INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS
EN 61800-1:1998	Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems
DIN V VDE V 0800-2-548 : 1999	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SECTION 548: EARTHING ARRANGEMENTS AND EQUIPOTENTIAL BONDING FOR INFORMATION TECHNOLOGY INSTALLATIONS
I.S. EN 746-2:2010	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
DIN EN 1987-3:2000-07	ELECTRICALLY PROPELLED ROAD VEHICLES - SPECIFIC REQUIREMENTS FOR SAFETY - PART 3: PROTECTION OF USERS AGAINST ELECTRICAL HAZARDS
DIN EN 61046 : 1995 AMD 1 1997	D.C. OR A.C. SUPPLIED ELECTRONIC STEP-DOWN CONVERTORS FOR FILAMENT LAMPS - GENERAL AND SAFETY REQUIREMENTS
I.S. EN 500-1:2006	MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS
I.S. EN 746-1:1997	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
EN 15011:2011+A1:2014	Cranes - Bridge and gantry cranes
I.S. EN 61918:2013	INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
EN 60079-14:2014/AC:2016	EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
DIN EN 61800-1 : 1999-08	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS; RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS
VDE 0160-101 : 1999-08	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS
I.S. EN 1398:2009	DOCK LEVELLERS - SAFETY REQUIREMENTS
I.S. EN 746-3:1997	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 3: SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES
EN 61557-8:2015/AC:2016-06	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
NFPA 79 HDBK : 2015	Electrical Standard for Industrial Machinery Handbook
I.S. EN 1987-1:1998	ELECTRICALLY PROPELLED ROAD VEHICLES - SPECIFIC REQUIREMENTS FOR SAFETY - ON BOARD ENERGY STORAGE
CEI EN 61800-1 : 2000	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS
DIN EN 61557-1 : 2007	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS
BIS IS/ISO 8528-7 : 1994(R2014)	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 7: TECHNICAL DECLARATIONS FOR SPECIFICATION AND DESIGN
CEI EN 50522 : 2011	EARTHING OF POWER INSTALLATIONS EXCEEDING 1 KV A.C.
BIS IS/IEC 519-3 : 1988(R2005)	SAFETY IN ELECTROHEAT INSTALLATION - PART 3: PARTICULAR REQUIREMENTS FOR INDUCTION AND CONDUCTION HEATING AND INDUCTION MELTING INSTALLATIONS
VDI 2381 Blatt 2:2009-07	Final inspection of mobile cranes - Instructional form for experts
BIS IS/IEC 61058-1 : 2000(R2007)	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
VDI 4068 Blatt 6:2011-10	Competent persons - Mobile elevating work platforms
BIS IS 13252-1 : 2010 AMD 1 2013	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
VDI 4068 Blatt 4:2011-04	Competent persons - Requirements for external training for the testing of handheld electric operated tools
VDI 4068 Blatt 8:2013-04	Competent Persons - Storage equipment and rack serving units
VDI 2083 Blatt 17:2013-06	Cleanroom technology - Compatibility of materials with the required cleanliness
BS 5486-1:1990	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - REQUIREMENTS FOR TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
VDI 2166 Blatt 2:2015-10	Planning of electrical installations in buildings - Advice for electric mobility
CEI EN 61557-11 : 2013	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 11: EFFECTIVENESS OF RESIDUAL CURRENT MONITORS (RCMS) TYPE A AND TYPE B IN TT, TN AND IT SYSTEMS
DIN EN 50153 : 2018	RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS
VDE 0721-211 : 1996	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 3: PARTICULAR REQUIREMENTS FOR INDUCTION AND CONDUCTION HEATING AND INDUCTION MELTING INSTALLATIONS
BIS IS/IEC 60947-2 : 2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT BREAKERS
VDE 0113-301 : 1993	ELECTRICAL EQUIPMENT OF INDUSTRIAL MACHINES - PART 3: PARTICULAR REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
VDI 4068 Blatt 5:2011-06	Competent Persons - Industrial trucks, attachments, trailers
VDI 2381 Blatt 1:2009-07	Final inspection of stationary and track-bound cranes - Instructionals form for experts
BIS IS/IEC 60898-1 : 2002	ELECTRICAL ACCESSORIES - CIRCUIT-BREAKERS FOR OVER CURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR AC OPERATION
BIS IS/ISO 8528-8 : 1995(R2014)	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 8: REQUIREMENTS AND TESTS FOR LOW-POWER GENERATING SETS
VDI 6000 Blatt 1:2008-02	Provision and installation of sanitary facilities - Private housing
VDE 0115-2 : 2018	RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS
KTA 3504 : 2015(R2017)
VDE 0800-1 : 1989	TELECOMMUNICATIONS; GENERAL CONCEPTS; REQUIREMENTS AND TESTS FOR THE SAFETY OF FACILITIES AND APPARATUS
VDE V 0185-100 : 1996	PROTECTION OF STRUCTURES AGAINST LIGHTNING - PART 1: GENERAL PRINCIPLES
VDI 3551:2011-01	Electromagnetic compatibility (EMC) in building services
KTA 3403 : 2015(R2017)	CABLE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL OF NUCLEAR POWER PLANTS
VDE 0804 : 1989 AMD 1 1992	TELECOMMUNICATIONS; ADDITIONAL REQUIREMENTS FOR CONSTRUCTION AND TESTING OF APPARATUS
BIS IS 13252 : 2003	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - GENERAL REQUIREMENTS
BS 5924:1989	SPECIFICATION FOR SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND THE INSTALLATION OF EQUIPMENT FOR RESISTANCE WELDING AND ALLIED PROCESSES
I.S. EN 50174-2:2009	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
I.S. EN 62026-2:2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I) (IEC 62026-2:2008 (MOD))
BS EN 62135-1:2015	RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION
I.S. HD 384.7.711:2003	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-711: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS
EN 61851-21:2002	Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply
I.S. EN 50272-3:2002	SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 3: TRACTION BATTERIES
I.S. EN 1987-3:1998	ELECTRICALLY PROPELLED ROAD VEHICLES - SPECIFIC REQUIREMENTS FOR SAFETY - PART 3: PROTECTION OF USERS AGAINST ELECTRICAL HAZARDS
I.S. EN 50091-1:1993	UNINTERRUPTIBLE POWER SYSTEMS (UPS) - GENERAL AND SAFETY REQUIREMENTS
BS EN 15011 : 2011	CRANES - BRIDGE AND GANTRY CRANES
17/30357380 DC : 0	BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES
BS EN 60669-2-1 : 2004	SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES
BS EN 60598-1:2015	Luminaires General requirements and tests
IEC 60364-5-52:2009	Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
UNI EN 15869-2 : 2010	INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS
ISO 13577-1:2016	Industrial furnaces and associated processing equipment Safety Part 1: General requirements
IEC 60669-1:2017 RLV	Switches for household and similar fixed-electrical installations - Part 1: General requirements
IEC TR 60269-5:2014	Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses
IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV	Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control
AAMI ES60601-1 : 2005 : R2012	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
EN IEC 62933-2-1:2018	Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification
I.S. EN 50550:2011	POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICE FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP)
BS EN 60079-14:2014	Explosive atmospheres Electrical installations design, selection and erection
BS EN 61347-1:2015	Lamp controlgear General and safety requirements
CEI EN 60974-9 : 2011	ARC WELDING EQUIPMENT - PART 9: INSTALLATION AND USE
I.S. EN 61158-2:2014	INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
I.S. HD 60364-5-52:2011	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-52: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - WIRING SYSTEMS
S.R. HD 60364-5-551:2010	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-55: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - OTHER EQUIPMENT - CLAUSE 551: LOW-VOLTAGE GENERATING SETS
I.S. HD 384.5.523:2002	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SECTION 523: CURRENT-CARRYING CAPACITIES IN WIRING SYSTEMS
I.S. EN 61140:2016	PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
I.S. EN IEC 62933-2-1:2018	ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION
I.S. EN 61439-1:2011	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
ISO/TS 20100:2008	Gaseous hydrogen Fuelling stations
I.S. HD 60364-7-714:2012	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-714: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXTERNAL LIGHTING INSTALLATIONS (IEC 60364-7-714:2011 (EQV))
I.S. EN 61984:2009	CONNECTORS - SAFETY REQUIREMENTS AND TESTS
I.S. EN 60519-3:2005	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 3: PARTICULAR REQUIREMENTS FOR INDUCTION AND CONDUCTION HEATING AND INDUCTION MELTING INSTALLATIONS
CAN/CSA-C22.2 NO. 61010-2-201:18	Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment (Adopted IEC 61020-2-201:2017, second edition, 2017-03, with Canadian deviations) \| Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire — Partie 2-201 : Exigences particulières pour les équipements de commande (norme IEC 61010-2-201:2017 adoptée, deuxième édition, 2017-03, avec exigences propres au Canada)
I.S. EN IEC 61204-7:2018	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS
AAMI ES60601-1 : 2005	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
I.S. EN 50272-1:2010	SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 1: GENERAL SAFETY INFORMATION
BS EN 60898-1 : 2003	ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION
BS IEC 61892-7:2014	MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 7: HAZARDOUS AREAS
BS EN 61800-5-1:2007	Adjustable speed electrical power drive systems Safety requirements. Electrical, thermal and energy
BS EN 60950-1 : 2006	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 61131-2:2007	PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
IEC 61347-1 REDLINE : 3ED 2015	LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
17/30338554 DC : 0	BS EN 1175 - SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL/ELECTRONIC REQUIREMENTS
BS EN 62477-1 : 2012	SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012)
EN 50153 : 2014 AMD 1 2017	RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS
BS EN 60950:2000	SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT
BS EN 61535 : 2009	INSTALLATION COUPLERS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS
BS EN 61558-2-16 : 2009	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS
BS EN 60439-1:1999	Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies
EN 15869-2:2010	Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 2: Onshore unit, safety requirements
BS EN 60204-1 : 2006	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
13/30272150 DC : 0	BS EN 13814 - FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURE - SAFETY
DD ISO/TS 22559-2:2010	SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 2: SAFETY PARAMETERS MEETING THE GLOBAL ESSENTIAL SAFETY REQUIREMENTS (GESRS)
EN 61800-5-1:2007/A1:2017	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY (IEC 61800-5-1:2007/A1:2016)
I.S. EN 50310:2016	TELECOMMUNICATIONS BONDING NETWORKS FOR BUILDINGS AND OTHER STRUCTURES
IEC 60950:1999	Safety of information technology equipment
PD IEC/TR 60601-4-3:2015	MEDICAL ELECTRICAL EQUIPMENT - PART 4-3: GUIDANCE AND INTERPRETATION - CONSIDERATIONS OF UNADDRESSED SAFETY ASPECTS IN THE THIRD EDITION OF IEC 60601-1 AND PROPOSALS FOR NEW REQUIREMENTS
BS EN 61851-1:2011	Electric vehicle conductive charging system General requirements
DIN EN ISO 8528-13:2014-09 (Draft)	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO 8528-13:2016, CORRECTED VERSION 2016-10-15)
CEI EN 62135-1 : 2016	RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION
BS EN 50550 : 2011	POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICE FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP)
S.R. CLC/TS 61643-12:2009	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 12: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - SELECTION AND APPLICATION PRINCIPLES
ISO/TR 14799-1:2015	Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison
ISO/TR 18569:2004	Safety of machinery Guidelines for the understanding and use of safety of machinery standards
UNE-EN 13135:2013	Cranes - Safety - Design - Requirements for equipment
ISO/IEC 15018:2004	Information technology Generic cabling for homes
IEC 60669-1:2017	Switches for household and similar fixed-electrical installations - Part 1: General requirements
I.S. EN 61851-1:2011	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS
IEC 61643-12:2008	Low-voltage surge protective devices - Part 12: Surge protective devices connected to low-voltage power distribution systems - Selection and application principles
I.S. HD 60364-7-717:2010	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS
IEC TR 63167:2018	Assessment of contact current related to human exposure to electric, magnetic and electromagnetic fields
IEC 61558-1:2017	Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
I.S. EN 50153:2014	RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS
I.S. EN 50191:2010	ERECTION AND OPERATION OF ELECTRICAL TEST EQUIPMENT
IEC 61204-7:2016 EXV	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS
IEC 60755:2017	General safety requirements for residual current operated protective devices
IEC 62103:2003	Electronic equipment for use in power installations
IEC 60364-7-704:2017	Low-voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations
IEC TS 62257-7-1:2010	Recommendations for small renewable energy and hybrid systems for rural electrification - Part 7-1: Generators - Photovoltaic generators
IEC 60204-11:2000	Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
IEC 61892-3:2012	Mobile and fixed offshore units - Electrical installations - Part 3: Equipment
IEC TS 62081:1999	Arc welding equipment - Installation and use
I.S. EN 60204-1:2006	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
I.S. EN 60204-11:2000	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
IEC 61918:2013	Industrial communication networks - Installation of communication networks in industrial premises
UNI EN 81-20 : 2014	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
I.S. EN 61557-9:2015	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 9: EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS
DIN EN 746-2:2011-02	Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
NF EN 50153 : 2014 AMD 1 2017	RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS
NF EN 61851-1 : 2012	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS
DIN EN 12649:2011-09	Concrete compactors and smoothing machines - Safety
DIN 25409-7:2016-01	Remote handling devices for use behind shielding walls - Part 7: Power manipulators with electric drives - Requirements and testing
DIN EN ISO 16230-1:2016-08	AGRICULTURAL MACHINERY AND TRACTORS - SAFETY OF HIGHER VOLTAGE ELECTRICAL AND ELECTRONIC COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS (ISO 16230-1:2015)
I.S.EN ISO 8528-13:2016&LC:2016	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO/DIS 8528-13:2014)
UNE-EN 61347-1:2016	Lamp controlgear - Part 1: General and safety requirements
UNE-EN 62271-202:2015	High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation