• IEC 60432-3:2012

    Current The latest, up-to-date edition.

    Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle)

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French, Spanish, Castilian

    Published date:  04-07-2012

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    1 General
    2 Requirements
    3 Assessment
    Annex A (normative) - Symbols
    Annex B (normative) - Method of testing the gas-pressure
    Annex C (informative) - Information for luminaire design
    Annex D (normative) - Conditions of compliance for design
            tests
    Annex E (informative) - Bulb wall temperature measurement
    Annex F (normative) - Induced failure test
    Bibliography

    Abstract - (Show below) - (Hide below)

    IEC 60432-3:2012 specifies the safety requirements for single-capped and double-capped tungsten halogen lamps, having rated voltages of up to 250 V, used for the following applications:
    - projection (including cinematograph and still projection),
    - photographic (including studio),
    - floodlighting,
    - special purpose,
    - general purpose,
    - stage lighting.
    This second edition of IEC 60432-3 cancels and replaces the first edition published in 2002, Amendment 1 (2005) and Amendment 2 (2008). The main changes with respect to the previous edition are as follows:
    - adapting the cold fill pressure requirements and tests for self-shielded lamps to the state of the technology,
    - introduction of requirements to fully cover photobiological safety according to IEC 62471.

    General Product Information - (Show below) - (Hide below)

    Committee TC 34/SC 34A
    Development Note Stability Date: 2025. (09/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current
    Supersedes
    Under Revision

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 60630 : 1999 MAXIMUM LAMP OUTLINERS FOR INCANDESCENT LAMPS
    PD IEC/TR 62471-2:2009 Photobiological safety of lamps and lamp systems Guidance on manufacturing requirements relating to non-laser optical radiation safety
    14/30278882 DC : 0 BS EN 60079-7 IEC 60079-7 ED. 5.0 - EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
    08/30175845 DC : DRAFT JAN 2008 BS IEC 62471-2 - PHOTO BIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS - PART 2: GUIDANCE ON MANUFACTURING REQUIREMENTS RELATING TO NON-LASER OPTICAL RADIATION SAFETY
    CEI 76-10 : 2011 PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS - PART 2: GUIDANCE ON MANUFACTURING REQUIREMENTS RELATING TO NON-LASER OPTICAL RADIATION SAFETY
    CEI 34-119 : 2010 GUIDE FOR LUMINAIRE DESIGN - INFORMATION FOR A SAFE AND CORRECT OPERATION OF THE LIGHT SOURCES
    08/30189882 DC : DRAFT SEP 2008 BS EN 60630:1999+A6 - MAXIMUM LAMP OUTLINES FOR INCANDESCENT LAMPS
    CSA E60598.1 : 2016 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
    15/30333848 DC : 0 BS EN 60357:2003/PRAA:2015 - TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS
    I.S. EN 60079-7:2015 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
    I.S. EN 60598-1:2015 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
    BS EN 60079-7 : 2015 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015)
    BS EN 60357 : 2003 TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS (IEC 60357:2002, MODIFIED)
    I.S. EN 60630:2000 MAXIMUM LAMP OUTLINES FOR INCANDESCENT LAMPS
    I.S. EN 62838:2016 LEDSI LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES NOT EXCEEDING 50 V A.C. R.M.S. OR 120 V RIPPLE FREE D.C. - SAFETY SPECIFICATIONS
    CSA C22.2 No. 60079-7 : 2016 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
    BS EN 60598-1:2015 (published 2016-03) Luminaires General requirements and tests
    ANSI C78.1460 : 2004(R2015) ELECTRIC LAMPS - SINGLE-ENDED TUNGSTEN-HALOGEN LAMPS GZ9.5 BASE, T6 BULB, 36.5MM LCL, 76.2MM MOL WITH PROXIMITY REFLECTOR
    EN 60598-1:2015/A1:2018 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
    IEC 60598-1:2014+AMD1:2017 CSV Luminaires - Part 1: General requirements and tests
    UNE-EN 60598-1:2015 Luminaires - Part 1: General requirements and tests
    IEC 60630:2005 CSV Maximum lamp outlines for incandescent lamps
    I.S. EN 60357:2003 TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS
    IEC TR 62471-2:2009 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety
    IEC 60079-7:2015+AMD1:2017 CSV Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
    EN IEC 60079-7:2015/A1:2018 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015/A1:2017)
    EN 60630:1998/A7:2015 MAXIMUM LAMP OUTLINES FOR INCANDESCENT LAMPS (IEC 60630:1994/A7:2014, MODIFIED)
    13/30281739 DC : 0 BS EN 62838 - SELF-BALLASTED LED-LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES NOT EXCEEDING 50 V A.C. R.M.S. OR 120 V RIPPLE FREE D.C. - SAFETY SPECIFICATION
    BS EN 62838 : 2016 LEDSI LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES NOT EXCEEDING 50 V A.C. R.M.S. OR 120 V RIPPLE FREE D.C. - SAFETY SPECIFICATIONS
    UNE-EN 62838:2016 LEDsi lamps for general lighting services with supply voltages not exceeding 50 v a.c. r.m.s. or 120 v ripple free D.C. - Safety specifications
    12/30266672 DC : 0 BS EN 60598-1 ED 8.0 - LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
    EN 62838:2016/AC:2017-11 LEDSI LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES NOT EXCEEDING 50 V A.C. R.M.S. OR 120 V RIPPLE FREE D.C. - SAFETY SPECIFICATIONS
    EN 60357:2003/A11:2016 TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
    IEC 60061-3:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
    IEC 60682:1980 Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps
    IEC 60838-1:2016+AMD1:2017 CSV Miscellaneous lampholders - Part 1: General requirements and tests
    IEC TR 62471-2:2009 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety
    IEC 60050-845:1987 International Electrotechnical Vocabulary (IEV) - Part 845: Lighting
    IEC 60127-2:2014 Miniature fuses - Part 2: Cartridge fuse-links
    IEC 60410:1973 Sampling plans and procedures for inspection by attributes
    IEC 60269-3:2010+AMD1:2013 CSV Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
    IEC 60061-4:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
    IEC 60598-1:2014+AMD1:2017 CSV Luminaires - Part 1: General requirements and tests
    IEC 60061-1:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
    IEC 62471:2006 Photobiological safety of lamps and lamp systems
    AS/NZS 62838:2020 LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications (IEC 62838:2015 (ED.1.0)/COR1:2017, MOD)
    IEC 60432-2:1999+AMD1:2005+AMD2:2012 CSV Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
    IEC 60335-2-56:2002+AMD1:2008+AMD2:2014 CSV Household and similar electrical appliances - Safety - Part 2-56:Particular requirements for projectors and similar appliances
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective