• IEC 60447:2004

    Current The latest, up-to-date edition.

    BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French

    Published date:  12-01-2004

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 General requirements
      4.1 Basic principles
      4.2 Operating sequence
    5 Actions and effects
      5.1 Actions to initiate opposite effects
      5.2 Stopping an effect
      5.3 Emergency STOP actuator
      5.4 Actions to initiate only one effect
    6 Actuator identification requirements
      6.1 Visual signal
      6.2 Acoustic signal
      6.3 Tactile signal
    7 Requirements for special kinds and particular use of actuators
      7.1 Single actuator for combined start/stop control
      7.2 Push-pull buttons
      7.3 Raise and lower with a lever
      7.4 Foot-operated actuators
      7.5 Numeric/alphanumeric keys
      7.6 Function keys
      7.7 Sensitive areas (actuators) on a visual display unit (VDU)
    Annex A (normative) Classification of, and correlation between,
                          actions and their resulting final effects
    Annex B (informative) Typical examples of monofunction actuators
    Bibliography

    Abstract - (Show below) - (Hide below)

    Establishes general actuating principles for manually operated actuators forming part of the man-machine interface associated with electrical equipment, in order to: - increase the safety (e.g. of persons, property, environment) through the safe operation of the equipment; - facilitate the proper and timely operation of the actuators.

    General Product Information - (Show below) - (Hide below)

    Committee TC 16
    Development Note Supersedes IEC 60054-2 (07/2004) Stability Date: 2017. (10/2012)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN VDE 0660-100 : 1992 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
    15/30265353 DC : 0 BS EN 62271-1 ED 2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
    VDI/VDE 3699-6 : 2015 PROCESS CONTROL USING DISPLAY SCREENS - INTERACTION PROCEDURES AND DEVICES
    14/30265073 DC : 0 BS EN ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
    BS ISO 25861 : 2007 SHIPS AND MARINE TECHNOLOGY - NAVIGATION - DAYLIGHT SIGNALLING LAMPS
    BIS IS/IEC 60947-3 : 1999 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE COMBINATION UNITS
    BS EN 15093:2008 Safety of machinery. Safety requirements for hot flat rolling mills
    BS IEC 60092-504:2016 (published 2016-09) Electrical installations in ships Automation, control and instrumentation
    BS PD ISO/TR 22100-3 : 2016 SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 3: IMPLEMENTATION OF ERGONOMIC PRINCIPLES IN SAFETY STANDARDS
    09/30175681 DC : 0 BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
    BS EN 62744:2015 Representation of states of objects by graphical symbols
    BS EN 61095:1993 ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
    12/30218691 DC : 0 BS EN 61175 - INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS
    ISO 12643-1:2009 Graphic technology Safety requirements for graphic technology equipment and systems Part 1: General requirements
    05/30142160 DC : DRAFT NOV 2005 ISO 25861 - SHIPS AND MARINE TECHNOLOGY - NAVIGATION - DAYLIGHT SIGNALLING LAMPS
    BS EN 61175-1 : 2015 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS - PART 1: BASIC RULES
    09/30201246 DC : 0 BS EN 710:1997/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT ASSOCIATED EQUIPMENT
    09/30175678 DC : 0 BS EN 14681:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
    14/30304423 DC : 0 BS EN 62271-102 ED 2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 102: ALTERNATING CURRENT DISCONNECTORS AND EARTHING SWITCHES
    09/30180832 DC : DRAFT AUG 2009 BS EN 13675 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND FINISHING LINE EQUIPMENT
    I.S. EN 61010-1:2010&A1:2019 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    08/30190505 DC : 0 BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
    BS EN 60947-1 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
    BS EN 50134-2:2017 ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 2: TRIGGER DEVICES
    BS EN 45510-2-7 : 2002 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
    BS ISO 12643-1 : 2009 GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
    NBR IEC 61892-6 : 2014 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 6: INSTALLATION
    10/30235503 DC : 0 BS EN 61496-1 AMD 2 - SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
    CEI EN 60073 : 2003 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
    03/301332 DC : DRAFT JAN 2003 ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
    BS PD IEC TR 61997 : 2001 GUIDELINES FOR THE USER INTERFACE IN MULTIMEDIA EQUIPMENT FOR GENERAL PURPOSE USE
    I.S. EN 15093:2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
    94/712993 DC : DRAFT NOV 1994 PREN 45511 - GUIDE FOR PROCUREMENT - ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
    CEI EN 61310-3 : 2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
    I.S. EN 61175-1:2015 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS - PART 1: BASIC RULES
    DIN EN 15094:2009-04 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
    BS EN 61209 : 1999
    UNI EN 15094 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
    UNI EN ISO 8230-1 : 2009 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
    BS EN ISO 8230-1:2008 (published 2009-07) Safety requirements for dry-cleaning machines Common safety requirements
    04/30117619 DC : DRAFT AUG 2004 IEC 61310-3 - SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
    ISO 12648:2006 Graphic technology Safety requirements for printing press systems
    NF EN 60073 : 2003 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
    BS ISO 1503 : 2008 SPATIAL ORIENTATION AND DIRECTION OF MOVEMENT - ERGONOMIC REQUIREMENTS
    CEI 18-54 : 2003 ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: SPECIAL FEATURES - CONTROL AND INSTRUMENTATION
    04/30096910 DC : DRAFT OCT 2004 ISO 11553-2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND OPERATED LASER PROCESSING DEVICES
    01/120061 DC : DRAFT JAN 2001 ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
    DIN EN 15093:2009-06 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
    UNI EN 15093 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
    04/30115780 DC : DRAFT JUN 2004 ISO 9355-3 - SAFETY OF MACHINERY - ERGONOMIC REQUIREMENTS FOR THE DESIGN OF SIGNALS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
    CSA E61496.1 :2004 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
    I.S. EN 61439-1:2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
    14/30304361 DC : 0 BS EN ISO 11111-1 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS
    BS EN 60073 : 2002 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
    BS ISO 8468 : 2007 SHIPS AND MARINE TECHNOLOGY - SHIP'S BRIDGE LAYOUT AND ASSOCIATED EQUIPMENT - REQUIREMENTS AND GUIDELINES
    BS EN 15094:2008 (published 2008-10) Safety of machinery. Safety requirements for cold flat rolling mills
    BS EN 61310-3 : 2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
    BS ISO 12648 : 2006 GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
    NF EN 60601-1 : 2007-01 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    04/30110212 DC : DRAFT MAR 2004 ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
    CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    BS IEC 61892-3:2012 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT
    BS ISO 12649 : 2004 GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
    15/30302640 DC : 0 BS IEC 60092-504 ED 4.0 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: AUTOMATION, CONTROL AND INSTRUMENTATION
    07/30168572 DC : 0 BS IEC 61010-1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    NBR IEC 60439-1 : 2003 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
    BS 5724-1(1979) : 1979 MEDICAL ELECTRICAL EQUIPMENT - SPECIFICATION FOR GENERAL SAFETY REQUIREMENTS
    CEI UNI EN 45510-2-7 : 2006 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
    EN 50134-2 : 2017 ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 2: TRIGGER DEVICES
    03/311404 DC : 0 IEC 61010-1 ED.3 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    02/205170 DC : DRAFT APR 2002 ISO/CD 17884 - SHIP AND MARINE TECHNOLOGY - NAVIGATION - SEARCHLIGHTS FOR HIGH SPEED CRAFT
    BS 4099-1(1986) : 1986 COLOURS OF INDICATOR LIGHTS, PUSH-BUTTONS, ANNUNCIATORS AND DIGITAL READOUTS - SPECIFICATION FOR COLOURS OF INDICATOR LIGHTS AND PUSH-BUTTONS
    04/30086349 DC : DRAFT APR 2004 EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
    CSA E61496.1 : 2004 : R2013 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
    CSA C22.2 No. 61010.1 :2012 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    04/30087862 DC : DRAFT FEB 2004 IEC 61175 ED.2 - INDUSTRIAL SYSTEMS, INSTALLATION AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS
    CAN/CSA-Z431-12 (R2016) Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators (Adopted IEC 60073:2002, sixth edition, 2002-05, with Canadian deviations) | Principes fondamentaux et de s?curit? pour l'interface homme-machine, le marquage et l'identification - Principes de codage pour les indicateurs et les organes de commande (norme IEC 60073:2002 adopt?e, sixi?me ?dition, 2002-05, avec exigences propres au Canada)
    CSA C22.2 No. 61010.1 : 2012 : FR SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
    CSA Z431 : 2012 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
    NF EN 61310-3 : 2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
    EN 61439-1 : 2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
    DIN EN 15094 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
    UNI CEI EN 45510-2-7 : 2011 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
    DIN EN 15093 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
    DIN EN ISO 8230-1:2009-05 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
    CAN/CSA-C22.2 NO. 60947-1-13 (R2018) Low-voltage switchgear and controlgear - Part 1: General rules (Tri-national standard, with UL 60947-1 and NMX-J-515-ANCE)
    IEC 60092-504 REDLINE : 4ED 2016 ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: AUTOMATION, CONTROL AND INSTRUMENTATION
    BS EN 61010-1:2010+A1:2019 (published 2019-03) Safety requirements for electrical equipment for measurement, control, and laboratory use General requirements
    ISO 25861:2007 Ships and marine technology Navigation Daylight signalling lamps
    IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
    CSA C22.2 No. 60601.1 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    IEC 60092-504:2016 Electrical installations in ships - Part 504: Automation, control and instrumentation
    IEC 60364-5-51:2005 Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules
    BS IEC 61892-6:2013 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 6: INSTALLATION
    I.S. EN 62271-1:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
    S.R. HD 60364-5-51:2009 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
    CEI EN 61095 : 2010 ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
    I.S. EN 60947-1:2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
    CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    I.S. HD 60364-5-51:2009 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES (IEC 60364-5-51:2005 (MOD))
    EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    BS EN 62271-1:2017 (published 2017-11) High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear
    I.S. EN 62744:2015 REPRESENTATION OF STATES OF OBJECTS BY GRAPHICAL SYMBOLS
    BS EN 61496-1 : 2013 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
    NBR IEC 60947-1 : 2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
    EN 62271-1 : 2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR (IEC 62271-1:2017)
    I.S. EN 50134-2:2017 ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 2: TRIGGER DEVICES
    I.S. EN 61095:2009 ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
    I.S. EN 15094:2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
    NF EN 61095 : 2009 ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
    I.S. EN 60073:2002 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATION DEVICES AND ACTUATORS
    ISO 12649:2004 Graphic technology Safety requirements for binding and finishing systems and equipment
    BS IEC 61892-2:2012 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 2: SYSTEM DESIGN
    ISO 9355-3:2006 Ergonomic requirements for the design of displays and control actuators Part 3: Control actuators
    I.S. HD 384.5.51:1998 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - CHAPTER 51: COMMON RULES
    ISO/TR 22100-3:2016 Safety of machinery Relationship with ISO 12100 Part 3: Implementation of ergonomic principles in safety standards
    I.S. EN 61310-3:2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
    NF EN 60947-1 : 2007 AMD 2 2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
    I.S. EN 60204-33:2011 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
    I.S. EN 61204-7:2006 LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 7: SAFETY REQUIREMENTS
    BS PD IEC TR 60601-4-3 : 2015 MEDICAL ELECTRICAL EQUIPMENT - PART 4-3: GUIDANCE AND INTERPRETATION - CONSIDERATIONS OF UNADDRESSED SAFETY ASPECTS IN THE THIRD EDITION OF IEC 60601-1 AND PROPOSALS FOR NEW REQUIREMENTS
    CAN/CSA-C22.2 NO. 61010-1-12 (R2017) Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (Tri-national standard, with UL 61010-1 and ANSI/ISA-61010-1 (82.02.01)
    CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    I.S. EN 61010-1:2010 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    13/30250344 DC : 0 BS EN 62744 - REPRESENTATION OF STATES OF OBJECTS BY GRAPHIC SYMBOLS
    I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    I.S. EN ISO 8230-1:2008 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
    CSA C22.2 No. 1010.1 : 0 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - GENERAL REQUIREMENTS
    DIN EN 61175-1:2016-05 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS - PART 1: BASIC RULES (IEC 61175-1:2015)
    IEC 61771:1995 Nuclear power plants - Main control-room - Verification and validation of design
    I.S. EN 61496-1:2013 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
    ISO 1503:2008 Spatial orientation and direction of movement Ergonomic requirements
    IEC 61892-6:2013 Mobile and fixed offshore units - Electrical installations - Part 6: Installation
    I.S. EN 60439-1:2000 LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
    IEC 61892-2:2012 Mobile and fixed offshore units - Electrical installations - Part 2: System design
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    IEC 61892-3:2012 Mobile and fixed offshore units - Electrical installations - Part 3: Equipment
    I.S. EN 60204-1:2006 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    I.S. EN 60204-32:2008 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
    IEC TR 61997:2001 Guidelines for the user interface in multimedia equipment for general purpose use
    ISO 8468:2007 Ships and marine technology Ship's bridge layout and associated equipment Requirements and guidelines
    EN 61010-1 : 2010 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS (IEC 61010-1:2010)
    ISO/TR 18569:2004 Safety of machinery Guidelines for the understanding and use of safety of machinery standards
    AAMI ES60601-1 : 2005 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    IEC 60204-33:2009 Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
    AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    AAMI ES60601-1 : 2005 : R2012 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    DIN EN 894-3 E : 2010 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
    DIN EN 13675:2010-10 Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment (includes Amendment A1:2010)
    DIN EN ISO 13849-1:2016-06 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015); German version EN ISO 13849-1:2015
    DIN EN 14681 E : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
    DIN EN 710:2010-10 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT
    DIN EN 14656 E : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
    DIN EN 13861:2012-01 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
    DIN EN ISO 11553-2:2009-03 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES
    UNE-EN 710:1998 SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT.
    DIN EN 14681:2010-10 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010)
    DIN EN 14656:2010-10 Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010)
    17/30352666 DC : 0 BS EN 61869-220 - INSTRUMENT TRANSFORMERS - PART 220: SAFETY REQUIREMENTS FOR INSTRUMENT TRANSFORMERS FOR LOW VOLTAGE APPLICATIONS
    BS EN 710 : 1998 SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT
    BS EN 894-3 : 2000 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
    ISO 11553-2:2007 Safety of machinery Laser processing machines Part 2: Safety requirements for hand-held laser processing devices
    UNE-EN 61439-1:2012 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    02/203840 DC : DRAFT MAY 2002 IEC 60204-1/ED.5.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    IEC 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
    BS EN 14656 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
    BS PD ISO/TR 18569 : 2004 SAFETY OF MACHINERY - GUIDELINES FOR THE UNDERSTANDING AND USE OF SAFETY OF MACHINERY STANDARDS
    BS PD IEC TS 62850 : 2013 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - GENERAL REQUIREMENTS FOR EQUIPMENT INTENDED TO BE USED IN EDUCATIONAL ESTABLISHMENTS BY CHILDREN
    BS EN 60601-1 : 2006 MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    ISO 8230-1:2008 Safety requirements for dry-cleaning machines Part 1: Common safety requirements
    BS EN 13675 : 2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
    04/30123347 DC : DRAFT OCT 2004 IEC 61439-1 - LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
    12/30261012 DC : 0 BS IEC 61892-6 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 6: INSTALLATION
    DIN EN 894-3:2010-01 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators (includes Amendment A1:2008)
    BS EN ISO 11111-1 : 2016 TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS (ISO 11111-1:2016)
    06/30154990 DC : 0 BS EN 60204-32 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
    BS EN 954-1 : 1997 SAFETY OF MACHINERY - SAFETY RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
    IEC 60439-1:1999+AMD1:2004 CSV LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
    BS 5486-1(1990) : 1990 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - REQUIREMENTS FOR TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
    BS EN 13861 : 2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
    IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
    BS EN 60204-1 : 2006 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    IEC 61010-1:2010+AMD1:2016 CSV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
    BS EN 60204-32:2008 Safety of machinery. Electrical equipment of machines Requirements for hoisting machines
    BS EN 14681 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
    BS EN 61439-1:2011 (published 2011-11) Low-voltage switchgear and controlgear assemblies General rules
    IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
    IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
    IEC TS 62850:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children
    IEC 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    BS EN 61175 : 2015 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS
    98/705686 DC : DRAFT MAR 1998 PREN 13135-1 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
    14/30238347 DC : 0 BS EN 60204-1 ED 6.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    08/30195018 DC : DRAFT DEC 2008 BS EN 60204-33 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
    IEC 61310-3:2007 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
    00/565497 DC : DRAFT DEC 2000 BS IEC 60601-1 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR SAFETY AND ESSENTIAL PERFORMANCE
    09/30204029 DC : 0 BS EN 61439-1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
    ISO 13849-1:2015 Safety of machinery Safety-related parts of control systems Part 1: General principles for design
    ISO 11111-1:2016 Textile machinery Safety requirements Part 1: Common requirements
    IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
    BS EN ISO 11553-2:2008 (published 2008-12) Safety of machinery. Laser processing machines Safety requirements for hand-held laser processing devices
    IEC 61095:2009 Electromechanical contactors for household and similar purposes
    IEC 61439-1:2020 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    BS EN 60204-33 : 2011 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
    10/30230568 DC : 0 BS EN 61892-3 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT
    BS EN 61204-7:2006 (published 2009-10) Live working. Conductive clothing Safety requirements
    BS EN 60439-1 : 1999 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
    BS EN ISO 13849-1:2015 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
    IEC 62744:2014 Representation of states of objects by graphical symbols
    16/30301661 DC : 0 BS EN 61439-1 ED3.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
    UNE-EN ISO 13849-1:2016 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
    UNE-EN ISO 11111-1:2016 Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016)
    04/30106146 DC : DRAFT MARCH 2004 BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    07/30153021 DC : 0 BS IEC 60204-33 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
    UNE-EN 61010-1:2011 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements
    ISA 61010-1 : 2008 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    UNE-EN 60204-1:2007 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    EN 61496-1:2013/AC:2015 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012)
    I.S. EN 14656:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
    CEI 18-63 : 2013 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 2: SYSTEM DESIGN
    I.S. EN 13861:2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
    I.S. EN ISO 11111-1:2016 TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS (ISO 11111-1:2016)
    I.S. EN 14681:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
    EN 60947-1:2007/A2:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
    I.S. EN 13675:2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
    I.S. EN ISO 13849-1:2015 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
    EN 710:1997+A1:2010/AC:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT
    I.S. EN ISO 11553-2:2008 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES
    DIN EN 61175:2006-07 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENTS AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS
    DIN EN 60073:2003-05 Basic and safety principles for man-machine interface, marking and identification Coding principles for indicators and actuators (IEC 60073:2002);
    I.S. EN 710:1998 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT
    I.S. EN ISO 8468:1995 SHIP'S BRIDGE LAYOUT AND ASSOCIATED EQUIPMENT - REQUIREMENTS AND GUIDELINES
    I.S. EN 894-3:2000 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
    IEC 60092-504:2016 RLV Electrical installations in ships - Part 504: Automation, control and instrumentation
    HD 384.5.51 : 200S2 ELECTRICAL INSTALLATION OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - CHAPTER 51: COMMON RULES
    EN 61310-3 : 2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
    EN 61175-1 : 2015 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS - PART 1: BASIC RULES (IEC 61175-1:2015)
    HD 60364-5-51:2009/A12:2017 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
    EN 60073 : 2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
    DIN VDE 0660-500 : 1991 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - REQUIREMENTS FOR TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
    EN 62744 : 2015 REPRESENTATION OF STATES OF OBJECTS BY GRAPHICAL SYMBOLS (IEC 62744:2014)
    EN 61175 : 2005 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS
    EN 60439-1:1999/A1:2004 LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
    EN 60204-32 : 2008 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
    EN 60204-33 : 2011 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
    CEI 18-58 : 2013 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT
    EN 61095 : 2009 ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
    EN 13675:2004+A1:2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
    EN ISO 11111-1 : 2016 TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS (ISO 11111-1:2016)
    EN 13861 : 2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
    EN 894-3:2000+A1:2008 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
    EN 14656:2006+A1:2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
    EN 15094 : 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
    EN ISO 8468 : 1994 SHIP'S BRIDGE LAYOUT AND ASSOCIATED EQUIPMENT - REQUIREMENTS AND GUIDELINES
    EN ISO 13849-1 : 2015 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
    EN 15093 : 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
    EN ISO 11553-2 : 2008 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES
    EN 14681:2006+A1:2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
    EN 45510-2-7 : 2002 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
    EN ISO 8230-1 : 2008 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 9241-17:1998 Ergonomic requirements for office work with visual display terminals (VDTs) Part 17: Form filling dialogues
    IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
    IEC 60050-721:1991 International Electrotechnical Vocabulary (IEV) - Part 721: Telegraphy, facsimile and data communication
    IEC 60050-441:1984 International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
    ISO 9355-1:1999 Ergonomic requirements for the design of displays and control actuators Part 1: Human interactions with displays and control actuators
    ISO 9241-16:1999 Ergonomic requirements for office work with visual display terminals (VDTs) Part 16: Direct manipulation dialogues
    ISO 9241-14:1997 Ergonomic requirements for office work with visual display terminals (VDTs) Part 14: Menu dialogues
    ISO 9241-15:1997 Ergonomic requirements for office work with visual display terminals (VDTs) Part 15: Command dialogues
    ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
    IEC GUIDE 104:2010 The preparation of safety publications and the use of basic safety publications and group safety publications
    ISO 11064-3:1999 Ergonomic design of control centres Part 3: Control room layout
    ISO 11064-1:2000 Ergonomic design of control centres Part 1: Principles for the design of control centres
    ISO 11064-2:2000 Ergonomic design of control centres Part 2: Principles for the arrangement of control suites
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective