• IEC 60502-1:2004+AMD1:2009 CSV

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV(Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  06-12-2018

    Language(s):  English - French

    Published date:  25-11-2009

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    1 Scope
    2 Normative references
    3 Terms and definitions
       3.1 Definitions of dimensional values (thicknesses,
            cross-sections, etc.)
       3.2 Definitions concerning the tests
    4 Voltage designations and materials
       4.1 Rated voltages
       4.2 Insulating compounds
       4.3 Sheathing compounds
    5 Conductors
    6 Insulation
       6.1 Material
       6.2 Insulation thickness
    7 Assembly of multicore cables, inner coverings and fillers
       7.1 Inner coverings and fillers
       7.2 Cables with rated voltage 0,6/1 (1,2) kV
       7.3 Cables with rated voltage 1,8/3 (3,6) kV
    8 Metallic layers for single-core and multicore cables
    9 Metallic screen
       9.1 Construction
       9.2 Requirements
    10 Concentric conductor
       10.1 Construction
       10.2 Requirements
       10.3 Application
    11 Metallic sheath
       11.1 Lead sheath
       11.2 Other metallic sheaths
    12 Metallic armour
       12.1 Types of metallic armour
       12.2 Materials
       12.3 Application of armour
       12.4 Dimensions of the armour wires and armour tapes
       12.5 Correlation between cable diameters and armour
            dimensions
       12.6 Round or flat wire armour
       12.7 Double tape armour
    13 Oversheath
       13.1 General
       13.2 Material
       13.3 Thickness
    14 Test conditions
       14.1 Ambient temperature
       14.2 Frequency and waveform of power frequency test
            voltages
       14.3 Waveform of impulse test voltages
    15 Routine tests
       15.1 General
       15.2 Electrical resistance of conductors
       15.3 Voltage test
    16 Sample tests
       16.1 General
       16.2 Frequency of sample tests
       16.3 Repetition of tests
       16.4 Conductor examination
       16.5 Measurement of thickness of insulation and of
            non-metallic sheaths (including extruded separation
            sheaths, but excluding inner extruded coverings)
       16.6 Measurement of thickness of lead sheath
       16.7 Measurement of armour wires and tapes
       16.8 Measurement of external diameter
       16.9 Hot set test for EPR, HEPR and XLPE insulations and
            elastomeric sheaths
    17 Type tests, electrical
       17.1 Insulation resistance measurement at ambient temperature
       17.2 Insulation resistance measurement at maximum conductor
            temperature
       17.3 Voltage test for 4 h
       17.4 Impulse test for cables of rated voltage 1,8/3 (3,6) kV
    18 Type tests, non-electrical
       18.1 Measurement of thickness of insulation
       18.2 Measurement of thickness of non-metallic sheaths
            (including extruded separation sheaths, but excluding
            inner coverings)
       18.3 Tests for determining the mechanical properties of
            insulation before and after ageing
       18.4 Tests for determining the mechanical properties of
            non-metallic sheaths before and after ageing
       18.5 Additional ageing test on pieces of completed cables
       18.6 Loss of mass test on PVC sheaths of type ST[2]
       18.7 Pressure test at high temperature on insulations and
            non-metallic sheaths
       18.8 Test on PVC insulation and sheaths and halogen free
            sheaths at low temperatures
       18.9 Test for resistance of PVC insulation and sheaths to
            cracking (heat shock test)
       18.10 Ozone resistance test for EPR and HEPR insulations
       18.11 Hot set test for EPR, HEPR and XLPE insulations and
             elastomeric sheaths
       18.12 Oil immersion test for elastomeric sheaths
       18.13 Water absorption test on insulation
       18.14 Fire tests
       18.15 Measurement of carbon black content of black PE
             oversheaths
       18.16 Shrinkage test for XLPE insulation
       18.17 Special bending test
       18.18 Determination of hardness of HEPR insulation
       18.19 Determination of the elastic modulus of HEPR insulation
       18.20 Shrinkage test for PE oversheaths
       18.21 Additional mechanical tests on halogen free oversheaths
       18.22 Water absorption test for halogen free oversheaths
    19 Electrical tests after installation
    Annex A (normative) - Fictitious calculation method for
            determination of dimensions of protective coverings
       A.1 General
       A.2 Method
    Annex B (normative) - Rounding of numbers
       B.1 Rounding of numbers for the purpose of the fictitious
            calculation method
       B.2 Rounding of numbers for other purposes
    Annex C (normative) - Determination of hardness of HEPR
            insulations
       C.1 Test piece
       C.2 Test procedure

    Abstract - (Show below) - (Hide below)

    IEC 60502-1:2004+A1:2009 specifies the construction, dimensions and test requirements of power cables with extruded solid insulation for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) for fixed installations such as distribution networks or industrial installations. This standard includes cables which exhibit properties of reduced flame spread, low levels of smoke emission and halogen-free gas emission when exposed to fire. Cables for special installation and service conditions are not included, for example cables for overhead networks, the mining industry, nuclear power plants (in and around the containment area), submarine use or shipboard application. This consolidated version consists of the second edition (2004) and its amendment 1 (2009). Therefore, no need to order amendment in addition to this publication.

    General Product Information - (Show below) - (Hide below)

    Committee TC 20
    Development Note Supersedes IEC 60502 (03/2001) Stability Date: 2018. (09/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    05/30128938 DC : DRAFT FEB 2005 IEC 61138 ED.3 - CABLES FOR PORTABLE EARTHING AND SHORT-CIRCUITING EQUIPMENT
    BS 8450(2006) : 2006 CODE OF PRACTICE FOR INSTALLATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT IN SHIPS
    UNE 21161:2017 Cables for AGL constant current series circuits.
    08/30188836 DC : 0 BS EN 50525-3-21 - ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 3-21: CABLES WITH SPECIAL FIRE PERFORMANCE - FLEXIBLE CABLES WITH HALOGEN-FREE CROSS LINKED INSULATION, AND LOW EMISSION OF SMOKE
    I.S. EN ISO 13628-5:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS
    BS 7856(2013) : 2013 CODE OF PRACTICE FOR SPECIAL DESIGN AND OTHER FEATURES OF ALTERNATING CURRENT WATTHOUR METERS FOR ACTIVE ENERGY (MID ACCURACY CLASSES A AND B) FOR USE IN THE UK
    PREN 50620 : DRAFT 2014 CHARGING CABLES FOR ELECTRIC VEHICLES
    BS EN IEC 62677-3-101:2018 (published 2018-04) Heat-shrinkable low and medium voltage moulded shapes Specification for individual materials. Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications
    UNE 21123-5:2017 Electric cables for industrial use of rated voltage 0,6/1 kV. Part 5: EPR insulated and polyolefin sheathed cables.
    CEI EN 60811-100 : 2014 ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 100: GENERAL
    UNE-EN 60811-100:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General
    I.S. EN 50525-3-21:2011 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 3-21: CABLES WITH SPECIAL FIRE PERFORMANCE - FLEXIBLE CABLES WITH HALOGEN-FREE CROSSLINKED INSULATION, AND LOW EMISSION OF SMOKE
    14/30288755 DC : 0 BS EN 50620 - CHARGING CABLES FOR ELECTRIC VEHICLES
    08/30188783 DC : 0 BS EN 50525-2-21 - ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 2-21: CABLES FOR GENERAL APPLICATIONS - FLEXIBLE CABLES WITH CROSSLINKED ELASTOMERIC INSULATION
    UNI EN ISO 13628-5 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS
    NBR IEC/TR 60783 : 2014 WIRING AND CONNECTORS FOR ELECTRIC ROAD VEHICLES
    14/30316181 DC : 0 BS EN 50628 - ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
    CEI EN 50525-2-51 : 2012 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-51: CABLES FOR GENERAL APPLICATIONS - OIL RESISTANT CONTROL CABLES WITH THERMOPLASTIC PVC INSULATION
    BS EN ISO 12696:2016 Cathodic protection of steel in concrete
    CEI EN 61138 : 2009 CABLES FOR PORTABLE EARTHING AND SHORT-CIRCUITING EQUIPMENT
    BS 7856(2017) : 2017 SPECIFICATION FOR SPECIAL DESIGN AND OTHER FEATURES OF ALTERNATING CURRENT WATTHOUR METERS FOR ACTIVE ENERGY FOR USE IN THE UK (ACCURACY CLASSES A AND B)
    15/30301443 DC : 0 BS 6724 - ELECTRIC CABLES - THERMOSETTING INSULATED, ARMOURED CABLES FOR VOLTAGES OF 600/1000 V AND 1 900/3300 V FOR FIXED INSTALLATIONS, HAVING LOW EMISSION OF SMOKE AND CORROSIVE GASES WHEN AFFECTED BY FIRE - SPECIFICATION
    IEC 62677-3-101:2018 HEAT-SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 3: SPECIFICATION FOR INDIVIDUAL MATERIALS - SHEET 101: HEAT-SHRINKABLE, POLYOLEFIN MOULDED SHAPES FOR LOW VOLTAGE APPLICATIONS
    15/30301501 DC : 0 BS 5467 - ELECTRIC CABLES - THERMOSETTING INSULATED, ARMOURED CABLES FOR VOLTAGES OF 600/1000 V AND 1900/3300 V, FOR FIXED INSTALLATIONS - SPECIFICATION
    12/30244369 DC : 0 BS 7889 - ELECTRIC CABLES - THERMOSETTING INSULATED, NON-ARMOURED CABLES WITH A VOLTAGE OF 600/1000 V, FOR FIXED INSTALLATIONS
    BS 8573(2012) : 2012 ELECTRIC CABLES - THERMOSETTING INSULATED, NON-ARMOURED CABLES WITH A VOLTAGE OF 600/1000 V, FOR FIXED INSTALLATIONS, AND HAVING LOW EMISSION OF SMOKE AND CORROSIVE GASES WHEN AFFECTED BY FIRE
    UNE 21123-3:2017 Industrial cables of rated voltage 0,6/1 kV. Part 3: EPR insulated and PVC sheathed cables.
    08/30189625 DC : 0 BS EN 10257-1 - ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES
    11/30214057 DC : 0 BS 7870-2 - LV AND MV POLYMERIC INSULATED CABLES FOR USE BY DISTRIBUTION AND GENERATION UTILITIES - PART 2: METHODS OF TEST
    BS EN 50525-2-21:2011 (published 2011-09) Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables for general applications. Flexible cables with crosslinked elastomeric insulation
    BS EN 50525-3-21 : 2011 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 3-21: CABLES WITH SPECIAL FIRE PERFORMANCE - FLEXIBLE CABLES WITH HALOGEN-FREE CROSSLINKED INSULATION, AND LOW EMISSION OF SMOKE
    04/30111859 DC : 0 IEC 62271-1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR - PART 1: COMMON SPECIFICATIONS
    BS EN 60694 : 1997 COMMON SPECIFICATION FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
    PREN 50525-2-21 : DRAFT 2008 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 2-21: CABLES FOR GENERAL APPLICATIONS - FLEXIBLE CABLES WITH CROSSLINKED ELASTOMERIC INSULATION
    CEI EN 50525-2-21 : 2012 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-21: CABLES FOR GENERAL APPLICATIONS - FLEXIBLE CABLES WITH CROSSLINKED ELASTOMERIC INSULATION
    PREN 50525-2-51 : DRAFT 2008 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 2-51: CABLES FOR GENERAL APPLICATIONS - OIL RESISTANT CONTROL CABLES WITH THERMOPLASTIC PVC INSULATION
    I.S. EN 61138:2008 CABLES FOR PORTABLE EARTHING AND SHORT-CIRCUITING EQUIPMENT
    16/30348626 DC : 0 BS 7856:2017 - SPECIFICATION FOR SPECIAL DESIGN AND OTHER FEATURES OF ALTERNATING CURRENT WATTHOUR METERS FOR ACTIVE ENERGY FOR USE IN THE UK (ACCURACY CLASSES A AND B)
    IEC 60502-2:2014 RLV Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
    07/30127452 DC : DRAFT AUG 2007 BS ISO 13628-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS
    BS EN 60811-100 : 2012 ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 100: GENERAL
    HD 605 S2:2008/corrigendum:2010 ELECTRIC CABLES - ADDITIONAL TEST METHODS
    12/30244462 DC : 0 BS 8573 - ELECTRIC CABLES - THERMOSETTING INSULATED, NON-ARMOURED CABLES WITH A VOLTAGE OF 600/1000 V, FOR FIXED INSTALLATIONS, HAVING LOW EMISSIONS OF SMOKE AND CORROSIVE WHEN AFFECTED BY FIRE
    I.S. HD 605:2008 ELECTRIC CABLES - ADDITIONAL TEST METHODS
    BS EN 50525-2-51 : 2011 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-51: CABLES FOR GENERAL APPLICATIONS - OIL RESISTANT CONTROL CABLES WITH THERMOPLASTIC PVC INSULATION
    13/30281948 DC : 0 BS 7856 - CODE OF PRACTICE FOR SPECIAL DESIGN AND OTHER FEATURES OF ALTERNATING CURRENT WATTHOUR METERS FOR ACTIVE ENERGY (MID ACCURACY CLASSES A AND B) FOR USE IN THE UK
    15/30324018 DC : 0 BS EN 62677-3-101 ED. 1.0 - HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 3: MATERIAL REQUIREMENTS - SHEET 101: HEAT-SHRINKABLE, POLYOLEFIN MOULDED SHAPES FOR LOW VOLTAGE APPLICATIONS
    EN IEC 62677-3-101 : 2018 HEAT-SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 3: SPECIFICATION FOR INDIVIDUAL MATERIALS - SHEET 101: HEAT-SHRINKABLE, POLYOLEFIN MOULDED SHAPES FOR LOW VOLTAGE APPLICATIONS (IEC 62677-3-101:2018)
    03/318201 DC : DRAFT NOV 2003 IEC 60502-2, ED.2 - POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES FROM 1 KV (UM = 1,2 KV) UP TO 30 KV (UM = 36 KV) - PART 2: CABLES FOR RATED VOLTAGES FROM 6 KV (UM = 7,2 KV) UP TO 30 KV (UM = 36 KV)
    04/30109444 DC : DRAFT FEB 2004 HD 22.13 S2 - HALOGEN-FREE FLEXIBLE CABLES HAVING LOW EMISSION OF SMOKE
    BS EN ISO 13628-5:2009 (published 2010-01) Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals
    BS EN 61138:1998 CABLES FOR PORTABLE EARTHING AND SHORT-CIRCUITING EQUIPMENT
    BS ISO 13628-5 : 2002 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS
    API SPEC 17E : 2017 SPECIFICATION FOR SUBSEA UMBILICALS
    I.S. HD 627:2003 MULTICORE AND MULTIPAIR CABLES FOR INSTALLATION ABOVE AND BELOW GROUND
    BS 6004(2000) : 2000 ELECTRIC CABLES - PVC INSULATED, NON-ARMOURED CABLES FOR VOLTAGES UP TO AND INCLUDING 450/750 V, FOR ELECTRIC POWER, LIGHTING AND INTERNAL WIRING
    I.S. EN 50628:2016 ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
    PREN 10257-1 : DRAFT 2008 ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES
    NF EN 61138 : 2008 CABLES FOR PORTABLE EARTHING AND SHORT-CIRCUITING EQUIPMENT
    05/30136422 DC : DRAFT JULY 2005
    UNE 21123-4:2017 Industrial cables of rated voltage 0,6/1kV. Part 4: XLPE insulated and polyolefin sheathed cables.
    CSA ISO/IEC 14543-3-5 : 2008 INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-5: MEDIA AND MEDIA DEPENDENT LAYERS - POWERLINE FOR NETWORK BASED CONTROL OF HES CLASS 1
    IEC 60227-7:1995+AMD1:2003+AMD2:2011 CSV Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors
    IEC 61892-4:2007 Mobile and fixed offshore units - Electrical installations - Part 4: Cables
    04/30109460 DC : DRAFT FEB 2004 HD 22.16 S2 - WATER RESISTANT POLYCHLOROPRENE OR EQUIVALENT SYNTHETIC ELASTOMER SHEATHED CABLES
    08/30188804 DC : 0 BS EN 50525-2-51 - ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 2-51: CABLES FOR GENERAL APPLICATIONS - OIL RESISTANT CONTROL CABLES WITH THERMOPLASTIC PVC INSULATION
    BS IEC 60287-1-1 : 2006 ELECTRIC CABLES - CALCULATION OF THE CURRENT RATING - PART 1-1: CURRENT RATING EQUATIONS (100% LOAD FACTOR) AND CALCULATION OF LOSSES - GENERAL
    EN 61439-1:2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
    UNE 21123-2:2017 Industrial cables of rated voltage 0,6/1 kV. Part 2: XLPE insulated and PVC Sheathed cables.
    IEC 60092-352:2005 Electrical installations in ships - Part 352: Choice and installation of electrical cables
    IEC TR 61200-52:2013 Electrical installation guide - Part 52: Selection and erection of electrical equipment - Wiring systems
    ISO/IEC 14543-3-5:2007 Information technology Home electronic system (HES) architecture Part 3-5: Media and media dependent layers Power line for network based control of HES Class 1
    UNE 211025:2017 Cables with intrinsic resistance to fire and intended for use in emergency circuits.
    UNE 21031:2017 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Cables for general applications - Flexible cables having more than 5 conductors with polyvinyl chloride sheath.
    CEI EN 50525-3-21 : 2012 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 3-21: CABLES WITH SPECIAL FIRE PERFORMANCE - FLEXIBLE CABLES WITH HALOGEN-FREE CROSSLINKED INSULATION, AND LOW EMISSION OF SMOKE
    API 17E REDLINE : 2010 SPECIFICATION FOR SUBSEA UMBILICALS
    I.S. EN 60694:1999 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
    CSA ISO/IEC 14543-3-5 : 2008 : R2013 INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-5: MEDIA AND MEDIA DEPENDENT LAYERS - POWERLINE FOR NETWORK BASED CONTROL OF HES CLASS 1
    I.S. HD 603:2007 DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1 KV
    I.S. EN IEC 62677-3-101:2018 HEAT-SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 3: SPECIFICATION FOR INDIVIDUAL MATERIALS - SHEET 101: HEAT-SHRINKABLE, POLYOLEFIN MOULDED SHAPES FOR LOW VOLTAGE APPLICATIONS
    I.S. HD 22.13:2007 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 13: HALOGEN-FREE FLEXIBLE CABLES HAVING LOW EMISSION OF SMOKE
    UNE-EN 50525-2-21:2012 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) -- Part 2-21: Cables for general applications - Flexible cables with crosslinked elastomeric insulation
    UNE 21144-1-1:2012 Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
    ISO 14990-1:2016 Earth-moving machinery Electrical safety of machines utilizing electric drives and related components and systems Part 1: General requirements
    I.S. HD 22.12:2007 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 12: HEAT RESISTANT EPR CORDS AND FLEXIBLE CABLES
    CEI 20-21/1-1 : 2007 ELECTRIC CABLES - CALCULATION OF THE CURRENT RATING - PART 1-1: CURRENT RATING EQUATIONS (100% LOAD FACTOR) AND CALCULATION OF LOSSES - GENERAL
    NFC 32 902 : 1998 INSULATED CABLES AND CORDS FOR INSTALLATIONS - POWER CABLE ACCESSORIES INTENDED FOR INDUSTRY, FOR RATED VOLTAGE 0,6/1(1,2) KV - TEST METHODS AND TEST REQUIREMENTS
    NBR IEC 60694 : 2006 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
    CEI EN 60684-3-247 : 2012 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL
    I.S. EN ISO 12696:2016 CATHODIC PROTECTION OF STEEL IN CONCRETE (ISO 12696:2016)
    I.S. EN 60684-3-247:2011 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL
    UNE-IEC 60092-352:2015 Electrical installations in ships - Part 352: Choice and installation of electrical cables
    API STD 17F : 2017 SUBSEA PRODUCTION CONTROL SYSTEMS
    PREN 50628 : DRAFT 2014 ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
    BIS IS/IEC 62271-1 : 2007 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS
    PREN 50525-3-21 : DRAFT 2008 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 3-21: CABLES WITH SPECIAL FIRE PERFORMANCE - FLEXIBLE CABLES WITH HALOGEN-FREE CROSSLINKED INSULATION, AND LOW EMISSION OF SMOKE
    BS 7671(2008) : 2008 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
    BS 7671(2008) : 2018 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
    IEC 60227-6:2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 6: Lift cables and cables for flexible connections
    BS EN 60684-3-247 : 2011 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL (IEC 60684-3-247:2011)
    UNE-EN 50525-3-21:2012 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 3-21: Cables with special fire performance - Flexible cables with halogen-free crosslinked insulation, and low emission of smoke
    UNE-EN 50525-2-51:2012 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) -- Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation
    DIN EN 10257-1:2012-02 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables
    I.S. EN 50525-2-21:2011 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-21: CABLES FOR GENERAL APPLICATIONS - FLEXIBLE CABLES WITH CROSSLINKED ELASTOMERIC INSULATION
    BS 7889(2012) : 2012 ELECTRIC CABLES - THERMOSETTING INSULATED, NON-ARMOURED CABLES WITH A VOLTAGE OF 600/1000 V, FOR FIXED INSTALLATIONS
    I.S. EN 60811-100:2012 ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 100: GENERAL (IEC 60811-100:2012 (EQV))
    I.S. EN 61439-1:2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
    HD 627 S1:1996/A2:2005 MULTICORE AND MULTIPAIR CABLES FOR INSTALLATION ABOVE AND BELOW GROUND
    UNE 21123-1:2017 Industrial cables of rated voltage 0,6/1 kV. Part 1: PVC insulated and sheathed cables.
    UNE-EN ISO 12696:2017 Cathodic protection of steel in concrete (ISO 12696:2016)
    IEC 61138:2007 Cables for portable earthing and short-circuiting equipment
    I.S. HD 22.16:2007 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 16: WATER RESISTANT POLYCHLOROPRENE OR EQUIVALENT SYNTHETIC ELASTOMER SHEATHED CABLES
    IEC 60287-1-1:2006+AMD1:2014 CSV Electric cables - Calculation of the current rating - Part 1-1:Current rating equations (100 % load factor) and calculation of losses - General
    I.S. EN 50525-2-51:2011 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-51: CABLES FOR GENERAL APPLICATIONS - OIL RESISTANT CONTROL CABLES WITH THERMOPLASTIC PVC INSULATION
    IEC TS 62100:2004 Cables for aeronautical ground lighting primary circuits
    IEC 60092-351:2004 Electrical installations in ships - Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables
    I.S. HD 604:2005 0.6/1 KV POWER CABLES WITH SPECIAL FIRE PERFORMANCE FOR USE IN POWER STATIONS
    IEC 60502-2 REDLINE : 3ED 2014 POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES FROM 1 KV (U[M] = 1,2 KV) UP TO 30 KV (U[M] = 36 KV) - PART 2: CABLES FOR RATED VOLTAGES FROM 6 KV (U[M] = 7,2 KV) UP TO 30 KV (U[M] = 36 KV)
    IEC 60724:2000+AMD1:2008 CSV Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
    EN 60684-3-247:2011/A1:2017 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL (IEC 60684-3-247:2011/A1:2016)
    IEEE 45-7 : 2012 RECOMMENDED PRACTICE FOR ELECTRICAL INSTALLATIONS ON SHIPBOARD - AC SWITCHBOARDS
    IEC 60684-3-247:2011+AMD1:2016 CSV Flexible insulating sleeving - Part 3 Specifications for individual types of sleeving - Sheet 247: Heatshrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall
    UNE-EN 61439-1:2012 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    BS EN 50628 : 2016 ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
    IEC 60811-100:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General
    04/30123347 DC : DRAFT OCT 2004 IEC 61439-1 - LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
    IEC 60694:1996+AMD1:2000+AMD2:2001 CSV Common specifications for high-voltage switchgear and controlgear standards
    BS EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies General rules
    IEC 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    09/30204029 DC : 0 BS EN 61439-1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
    BS EN 10257-1 : 2011 ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES
    ISO 12696:2016 Cathodic protection of steel in concrete
    ISO 13628-5:2009 Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals
    BS ISO 14990-1:2016 (published 2017-03) Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements
    IEC 61439-1:2020 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
    16/30301661 DC : 0 BS EN 61439-1 ED3.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
    UNE-EN 10257-1:2012 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables
    UNE-IEC 61892-4:2016 Mobile and fixed offshore units - Electrical installations - Part 4: Cables
    EEMUA 133 : 2011 SPECIFICATION FOR UNDERGROUND ARMOURED CABLE PROTECTED AGAINST SOLVENT PENETRATION AND CORROSIVE ATTACK
    I.S. EN 10257-1:2011 ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES
    EN 61138:2007 CABLES FOR PORTABLE EARTHING AND SHORT-CIRCUITING EQUIPMENT
    EN 50525-2-51 : 2011 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-51: CABLES FOR GENERAL APPLICATIONS - OIL RESISTANT CONTROL CABLES WITH THERMOPLASTIC PVC INSULATION
    EN 60694:1996/A2:2001 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
    HD 603 S1:1994/A3:2007 DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1 KV
    BS 7671(2008) : 2018 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
    HD 604 S1:1994/A3:2005 0.6/1 KV POWER CABLES WITH SPECIAL FIRE PERFORMANCE FOR USE IN POWER STATIONS
    CEI 18-64 : 2008 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 4: CABLES
    EN 10257-1:2011 ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES
    HD 22.13 : 200S2 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 13: HALOGEN-FREE FLEXIBLE CABLES HAVING LOW EMISSION OF SMOKE
    EN ISO 12696:2016 (edition 2) Cathodic protection of steel in concrete (ISO 12696:2016)
    BS 7856:2017 SPECIFICATION FOR SPECIAL DESIGN AND OTHER FEATURES OF ALTERNATING CURRENT WATTHOUR METERS FOR ACTIVE ENERGY FOR USE IN THE UK (ACCURACY CLASSES A AND B)
    HD 22.12 : 200S2 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 12: HEAT RESISTANT EPR CORDS AND FLEXIBLE CABLES
    HD 22.16 : 200S2 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 16: WATER RESISTANT POLYCHLOROPRENE OR EQUIVALENT SYNTHETIC ELASTOMER SHEATHED CABLES
    BS 7856:2013 CODE OF PRACTICE FOR SPECIAL DESIGN AND OTHER FEATURES OF ALTERNATING CURRENT WATTHOUR METERS FOR ACTIVE ENERGY (MID ACCURACY CLASSES A AND B) FOR USE IN THE UK
    EN 60811-100 : 2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General
    BS 6004:2000 ELECTRIC CABLES - PVC INSULATED, NON-ARMOURED CABLES FOR VOLTAGES UP TO AND INCLUDING 450/750 V, FOR ELECTRIC POWER, LIGHTING AND INTERNAL WIRING
    BS 7671(2008) : 2008 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
    EN 50628:2016 ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
    EN 50525-3-21:2011/AC:2013 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 3-21: CABLES WITH SPECIAL FIRE PERFORMANCE - FLEXIBLE CABLES WITH HALOGEN-FREE CROSSLINKED INSULATION, AND LOW EMISSION OF SMOKE
    EN 50525-2-21:2011/AC:2013 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-21: CABLES FOR GENERAL APPLICATIONS - FLEXIBLE CABLES WITH CROSSLINKED ELASTOMERIC INSULATION
    EN ISO 13628-5 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS (ISO 13628-5:2009)
    UNI EN 10257-1 : 2011 ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60038:2009 IEC standard voltages
    IEC 60811-3-1:1985 COMMON TEST METHODS FOR INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - METHODS SPECIFIC TO PVC COMPOUNDS - PRESSURE TEST AT HIGH TEMPERATURE - TESTS FOR RESISTANCE TO CRACKING
    IEC 60228:2004 Conductors of insulated cables
    IEC 60986:2000+AMD1:2008 CSV Short-circuit temperature limits of electric cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
    IEC 60684-2:2011 Flexible insulating sleeving - Part 2: Methods of test
    IEC 60811-4-1:2004 INSULATING AND SHEATHING MATERIALS OF ELECTRIC AND OPTICAL CABLES - COMMON TEST METHODS - PART 4-1: METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - RESISTANCE TO ENVIRONMENTAL STRESS CRACKING - MEASUREMENT OF THE MELT FLOW INDEX - CARBON BLACK AND/OR MINERAL FILLER CONTENT MEASUREMENT IN POLYETHYLENE BY DIRECT COMBUSTION - MEASUREMENT OF CARBON BLACK CONTENT BY
    IEC 60724:2000+AMD1:2008 CSV Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
    IEC 60502-2:2014 RLV Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
    IEC 60332-1:1993 TESTS ON ELECTRIC CABLES UNDER FIRE CONDITIONS - PART 1: TEST ON A SINGLE VERTICAL INSULATED WIRE OR CABLE
    IEC 60754-1:2011 Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
    IEC 60230:1966 Impulse tests on cables and their accessories
    IEC 60811-1-2:1985 COMMON TEST METHODS FOR INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - PART 1: METHODS FOR GENERAL APPLICATION - SECTION TWO: THERMAL AGEING METHODS
    IEC 60183:2015 Guidance for the selection of high-voltage A.C. cable systems
    IEC 60754-2:2011 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
    IEC 60811-1-1:1993+AMD1:2001 CSV COMMON TEST METHODS FOR INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES AND OPTICAL CABLES - PART 1-1: METHODS FOR GENERAL APPLICATION - MEASUREMENT OF THICKNESS AND OVERALL DIMENSIONS - TESTS FOR DETERMINING THE MECHANICAL PROPERTIES
    IEC 60811-1-3:1993+AMD1:2001 CSV COMMON TEST METHODS FOR INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - METHODS FOR GENERAL APPLICATION - METHODS FOR DETERMINING THE DENSITY - WATER ABSORPTION TESTS - SHRINKAGE TEST
    IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
    IEC 60811-1-4:1985 INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 1-4: GENERAL APPLICATION - TESTS AT LOW TEMPERATURE
    ISO 48:2010 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
    IEC 60811-2-1:1998+AMD1:2001 CSV INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 2-1: METHODS SPECIFIC TO ELASTOMERIC COMPOUNDS - OZONE RESISTANCE, HOT SET AND - MINERAL OIL IMMERSION TESTS
    IEC 61034-2:2005+AMD1:2013 CSV Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements
    IEC 60811-3-2:1985 COMMON TEST METHODS FOR INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - METHODS SPECIFIC TO PVC COMPOUNDS - LOSS OF MASS TEST - THERMAL STABILITY TEST
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective