IEC 60534-1:2005
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Industrial-process control valves - Part 1: Control valve terminology and general considerations
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
23-05-2023
Superseded by
Language(s)
English - French
Published date
06-01-2005
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.applies to all types of industrial-process control valves (hereinafter referred to as control valves). This part establishes a partial basic terminology list and provides guidance on the use of all other parts of IEC 60534
| Committee |
TC 65/SC 65B
|
| DevelopmentNote |
Stability Date: 2017. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| JIS B 2005-1:2012 | Identical |
| NF EN 60534-1 : 2005 | Identical |
| NEN EN IEC 60534-1 : 2005 | Identical |
| PN EN 60534-1 : 2005 | Identical |
| SAC GB/T 17213.1 : 1998 | Identical |
| IS 10189 : Part 1 : 2017 | Identical |
| CEI EN 60534-1 : 2005 | Identical |
| EN 60534-1:2005 | Identical |
| CEI EN IEC 60534-1:2023 | Identical |
| OVE/ONORM EN 60534-1 : 2005 | Identical |
| UNE-EN 60534-1:2005 | Identical |
| NFE 29 312 : 1984 | Similar to |
| UNE-EN 60534-1:1999 | Identical |
| I.S. EN 60534-1:2005 | Identical |
| BS EN 60534-1:2005 | Identical |
| NEN 10534-1 : 1993 | Identical |
| NFC 46 502 : 1988 | Identical |
| DIN IEC 60534-1:1990-08 | Identical |
| BS 5793-1(1989) : AMD 7815 | Identical |
| DIN EN 60534-1:2005-07 | Identical |
| BS EN 61987-23:2016 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of Properties (LOPs) of actuators for electronic data exchange |
| BS EN 61514-2:2013 | Industrial process control systems Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly |
| CEI EN 60534-8-4 : 2016 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-4: NOISE CONSIDERATIONS - PREDICTION OF NOISE GENERATED BY HYDRODYNAMIC FLOW |
| I.S. EN 61987-23:2016 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 23: LISTS OF PROPERTIES (LOPS) OF ACTUATORS FOR ELECTRONIC DATA EXCHANGE |
| I.S. EN 60534-2-4:2009 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
| NF EN 60534 8-2 : 2012 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES |
| BS 5793-4:1987 | Industrial-process control valves Specification for inspection and routine testing |
| 06/30157192 DC : 0 | BS EN 736-3 - VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS |
| BS EN 60534-2-1:2011 | Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures Power metering and monitoring devices (PMD) |
| BS EN 60534-3-2:2001 | Industrial-process control valves. Dimensions Face-to-face dimensions for rotary control valves except butterfly valves |
| 14/30295852 DC : 0 | BS EN 60534-2-3 ED. 3.0 - INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-3: FLOW CAPACITY - TEST PROCEDURES |
| CEI EN 60534-9 : 2009 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 9: TEST PROCEDURE FOR RESPONSE MEASUREMENTS FROM STEP INPUTS |
| BS EN 60534-8-4:2015 | Industrial-process control valves Noise considerations. Prediction of noise generated by hydrodynamic flow |
| 13/30287720 DC : 0 | BS EN 61987-21 ED 1.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 21: LIST OF PROPERTIES (LOP) OF AUTOMATED VALVES FOR ELECTRONIC DATA EXCHANGE - GENERIC STRUCTURES |
| CEI EN 60534-7 : 2012 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 7: CONTROL VALVE DATA SHEET |
| I.S. EN 61987-24-2:2017 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 24-2: LIST OF PROPERTIES (LOPS) OF VALVE/ACTUATOR ACCESSORIES FOR ELECTRONIC DATA EXCHANGE |
| I.S. EN 60534-8-2:2011 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES (IEC 60534-8-2:2011 (EQV)) |
| I.S. EN 14382:2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
| DIN EN ISO 23553-1:2014-09 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014 |
| IEC 60534-8-3:2010 | Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method |
| BS EN 14382 : 2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 88-2:2007 | Pressure regulators and associated safety devices for gas appliances Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
| BS ISO 6358-3:2014 | Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids Method for calculating steady-state flow-rate characteristics of systems |
| DIN EN 736-3:2008-04 | Valves - Terminology - Part 3: Definition of terms |
| EN 60534-3-1:2000/corrigendum:2000 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 3-1: DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES |
| EN 60534-2-5:2003 | Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery |
| EN 61987-23:2016 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Lists of Properties (LOPs) of actuators for electronic data exchange |
| EN 60534-8-3:2011 | Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method |
| EN 1349:2009 | Industrial process control valves |
| EN 61987-21:2016 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures |
| EN 61514-2:2013 | INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013) |
| BS EN 1349:2009 | Industrial process control valves |
| BS 5793-5:1984 | Industrial-process control valves Specification for marking |
| BS EN 60534-2-4:2009 | Industrial-process control valves Flow capacity. Inherent flow characteristics and rangeability |
| 13/30282237 DC : 0 | BS EN 60534-8-4 ED 3.0 - INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-4: NOISE CONSIDERATIONS - PREDICTION OF NOISE GENERATED BY HYDRODYNAMIC FLOW |
| PREN 14382 : DRAFT 2016 | GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR |
| BS EN 60534-7:2010 | Industrial-process control valves Control valve data sheet |
| I.S. EN 334:2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 61987-24-3:2017 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOPs) of flow modification accessories for electronic data exchange |
| 04/30117386 DC : DRAFT JUL 2004 | EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| 04/30110315 DC : DRAFT MAR 2004 | IEC 60534-9 - INDUSTRIAL PROCESS CONTROL VALVES - PART 9: TEST PROCEDURE FOR RESPONSE MEASUREMENTS FROM STEP INPUTS |
| BS EN 60534-2-3:2016 | Industrial-process control valves Flow capacity. Test procedures |
| I.S. EN 61987-22:2016 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 22: LISTS OF PROPERTIES (LOPS) OF VALVE BODY ASSEMBLIES FOR ELECTRONIC DATA EXCHANGE |
| UNI EN 334 : 2009 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| CEI EN 60534-2-5 : 2004 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-5: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW THROUGH MULTISTAGE CONTROL VALVES WITH INTERSTAGE RECOVERY |
| CEI EN 60534-8-2 : 2012 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES |
| IEC 60534-8-1:2005 | Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves |
| IEC 60534-3-2:2001 | Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves |
| I.S. EN 60534-9:2007 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 9: TEST PROCEDURE FOR RESPONSE MEASUREMENTS FROM STEP INPUTS |
| BS EN 60534-8-3:2011 | Industrial-process control valves Noise considerations. Control valve aerodynamic noise prediction method |
| BS EN 60534-8-2:2011 | Industrial-process control valves Noise considerations. Laboratory measurement of noise generated by hydrodynamic flow through control valves |
| I.S. EN 61987-24-3:2017 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 24-3: LISTS OF PROPERTIES (LOPS) OF FLOW MODIFICATION ACCESSORIES FOR ELECTRONIC DATA EXCHANGE |
| I.S. EN 60534-2-1:2011-2015-10 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-1: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW UNDER INSTALLED CONDITIONS |
| IEC 61987-24-2:2017 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange |
| BS EN 334 : 2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| I.S. EN 736-3:2008 | VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS |
| I.S. EN 1349:2009 | INDUSTRIAL PROCESS CONTROL VALVES |
| UNI EN 1349 : 2010 | INDUSTRIAL PROCESS CONTROL VALVES |
| VDI/VDE 2178:2009-07 | Fluidic characteristic quantities of quarter turn valves and their determination |
| I.S. EN 88-2:2007 | PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 500 MBAR UP TO AND INCLUDING 5 BAR |
| VDI/VDE 3844:2014-01 | Industrial process control valves - Actuators for control valves |
| VDI/VDE 2176:2007-09 | Fluidic characteristic quantities of vanes and their determination |
| VDI 2073 Blatt 2:2012-05 | Hydraulic systems in building services - Hydraulic balancing |
| BS 5793-2.2(1981) : AMD 7817 | INDUSTRIAL PROCESS CONTROL VALVES - FLOW CAPACITY - SIZING EQUATIONS FOR COMPRESSIBLE FLUID FLOW UNDER INSTALLED CONDITIONS |
| CEI EN 60534-8-3 : 2012 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-3: NOISE CONSIDERATIONS - CONTROL VALVE AERODYNAMIC NOISE PREDICTION METHOD |
| BS EN 61987-24-2:2017 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues List of properties (LOPs) of valve/actuator accessories for electronic data exchange |
| BS EN 61987-21:2016 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues List of Properties (LOP) of automated valves for electronic data exchange. Generic structures |
| DIN EN 60534-2-4:2009-11 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
| BS 5793-2.3(1984) : 1984 AMD 7818 | INDUSTRIAL PROCESS CONTROL VALVES - FLOW CAPACITY - METHODS OF TEST |
| BS EN 60534-8-1:2005 | Industrial-process control valves Noise considerations. Laboratory measurement of noise generated by aerodynamic flow through control valves |
| I.S. EN 61514-2:2013 | INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013 (EQV)) |
| 03/314999 DC : DRAFT SEP 2003 | IEC 60534-4 - INDUSTRIAL PROCESS CONTROL VALVES - PART 4: INSPECTION AND ROUTINE TESTING |
| I.S. EN 60534-8-1:2005 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES |
| I.S. EN ISO 23553-1:2014 | SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014) |
| EN 61987-24-3:2017 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange |
| BS EN 60534-5:2004 | Industrial-process control valves Marking |
| NF EN 60534 8-1 : 2006 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES |
| CEI EN 60534-2-4 : 2010 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
| CEI EN 60534-8-1 : 2006 | VANNES DE REGULATION DES PROCESSUS INDUSTRIELS - PARTIE 8-1: CONSIDERATIONS SUR LE BRUIT - MESURE EN LABORATOIRE DU BRUIT CREE PAR UN DEBIT AERODYNAMIQUE A TRAVERS UNE VANNE DE REGULATION |
| DIN EN 334:2016-05 (Draft) | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| I.S. EN 60534-3-1:2000 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 3-1: DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES |
| DIN EN 14382:2016-05 (Draft) | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| UNE-EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
| IEC 61514-2:2013 | Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly |
| IEC 60534-2-4:2009 | Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability |
| IEC 60534-9:2007 | Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs |
| UNI EN 736-3 : 2008 | VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS |
| UNI EN 14382 : 2009 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| UNI EN ISO 23553-1 : 2014 | SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES |
| DIN IEC 60534-2-4:1990-11 | INDUSTRIAL-PROCESS CONTROL VALVES; FLOW CAPACITY; INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
| BS EN 61987-22:2016 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of Properties (LOPs) of valve body assemblies for electronic data exchange |
| BS EN 60534-3-3:1998 | Industrial-process control valves Dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves |
| 96/201627 DC : DRAFT FEB 1996 | IEC 60534-4:1982 - INDUSTRIAL PROCESS CONTROL VALVES - PART 4: INSPECTION AND ROUTINE TESTING |
| BS EN 60534-2-5:2003 | Industrial-process control valves. Flow capacity Sizing equations for fluid flow through multistage control valves with interstage recovery |
| 16/30334287 DC : 0 | BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR |
| 07/30174895 DC : DRAFT DEC 2007 | BS EN 60534-7 ED.2 - INDUSTRIAL-PROCESS CONTROL VALVE - PART 7: CONTROL VALVE DATA SHEET |
| 15/30323275 DC : 0 | BS EN 61987-24-3 ED 1.0 - MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 24-3: LIST OF PROPERTIES (LOP) OF FLOW MODIFICATION ACCESSORIES FOR ELECTRONIC DATA EXCHANGE |
| NF EN 60534-7 : 2012 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 7: CONTROL VALVE DATA SHEET |
| 09/30201712 DC : 0 | BS EN 60534-7 - INDUSTRIAL-PROCESS CONTROL VALVE - PART 7: CONTROL VALVE DATA SHEET |
| 08/30179182 DC : DRAFT MAY 2008 | BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES |
| NF EN 60534-2-4 : 2009 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
| I.S. EN 61987-21:2016 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 21: LIST OF PROPERTIES (LOP) OF AUTOMATED VALVES FOR ELECTRONIC DATA EXCHANGE - GENERIC STRUCTURES |
| I.S. EN 60534-7:2010 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 7: CONTROL VALVE DATA SHEET |
| I.S. EN 60534-5:2004 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 5: MARKING |
| CEI EN 60534-5 : 2005 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 5: MARKING |
| EN 61987-24-2:2017 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange |
| 16/30334290 DC : 0 | BS EN 14382 - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR |
| IEC 61987-24-3:2017 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange |
| IEC 60534-8-4:2015 | Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow |
| IEC 60534-8-2:2011 | Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves |
| DIN EN 88-2:2008-03 | Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
| IEC 61987-22:2015 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 22: Lists of Properties (LOPs) of valve body assemblies for electronic data exchange |
| IEC 60534-7:2010 | Industrial-process control valves - Part 7: Control valve data sheet |
| IEC 60534-3-1:2000 | Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves |
| BS EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves |
| ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
| 12/30250105 DC : 0 | BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012) |
| IEC 61987-21:2015 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures |
| IEC 60534-2-5:2003 | Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery |
| 09/30150663 DC : 0 | BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS |
| ISO 6358-3:2014 | Pneumatic fluid power Determination of flow-rate characteristics of components using compressible fluids Part 3: Method for calculating steady-state flow-rate characteristics of systems |
| EN 334:2005+A1:2009 | Gas pressure regulators for inlet pressures up to 100 bar |
| EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
| EN 88-2:2007 | Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
| DIN EN 60534-2-1:2012-01 | Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC 60534-2-1:2011); German version EN 60534-2-1:2011 |
| 03/321016 DC : DRAFT DEC 2003 | IEC 60534-8-1 ED.2 - INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES |
| I.S. EN 60534-8-4:2015 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-4: NOISE CONSIDERATIONS - PREDICTION OF NOISE GENERATED BY HYDRODYNAMIC FLOW |
| 06/30155498 DC : DRAFT AUG 2006 | ISO 4126-10 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 10: SIZING OF SAFETY VALVES AND CONNECTED INLET AND OUTLET LINES FOR GAS/LIQUID TWO-PHASE FLOW |
| CEI EN 60534-3-1 : 2001 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 3-1: DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES |
| 02/203205 DC : DRAFT FEB 2002 | IEC 61514-2. ED.1 - INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS |
| 15/30323271 DC : 0 | BS EN 61987-24-2 ED 1.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 24-2: LIST OF PROPERTIES (LOP) OF VALVE/ACTUATOR ACCESSORIES FOR ELECTRONIC DATA EXCHANGE |
| BS EN 60534-2-2:1993 | Industrial-process control valves. Flow capacity Sizing equations for compressible fluid flow under installed conditions |
| BS EN 60534-9:2007 | Industrial-process control valves Test procedure for response measurements from step inputs |
| 09/30201330 DC : 0 | BS EN 60534-8-3 - INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-3: NOISE CONSIDERATIONS CONTROL VALVE AERODYNAMIC NOISE PREDICTION METHOD |
| BS 5793-8.1:1986 | Industrial-process control valves. Noise considerations Method for laboratory measurement of noise generated by aerodynamic flow through control valves |
| 03/300069 DC : DRAFT JAN 2003 | IEC 60534-8-4 ED.2 - INDUSTRIAL PROCESS CONTROL VALVES - PART 8-4: NOISE CONSIDERATIONS - PREDICTION OF NOISE GENERATED BY HYDRODYNAMIC FLOW |
| I.S. EN 60534-2-3:2016 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-3: FLOW CAPACITY TEST PROCEDURES |
| I.S. EN 60534-2-5:2003 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-5: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW THROUGH MULTISTAGE CONTROL VALVES WITH INTERSTAGE RECOVERY |
| BS EN 60534-3-1:2000, IEC 60534-3-1:2000 | INDUSTRIAL-PROCESS CONTROL VALVES - DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES |
| EN 60534-2-1:2011/AC:2015 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-1: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW UNDER INSTALLED CONDITIONS (IEC 60534-2-1:2011) |
| IEC 60534-2-3:2015 | Industrial-process control valves - Part 2-3: Flow capacity - Test procedures |
| BS EN 736-3:2008 | Valves. Terminology Definition of terms |
| IEC 60534-2-1:2011 | Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions |
| IEC 60534-5:2004 | Industrial-process control valves - Part 5: Marking |
| IEC 60534-3-3:1998 | Industrial-process control valves - Part 3-3: Dimensions End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves |
| IEC 61987-23:2015 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Lists of Properties (LOPs) of actuators for electronic data exchange |
| EN 61987-22:2016 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 22: Lists of Properties (LOPs) of valve body assemblies for electronic data exchange |
| EN 60534-9 : 2007 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 9: TEST PROCEDURE FOR RESPONSE MEASUREMENTS FROM STEP INPUTS |
| EN 60534-8-1:2005 | Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves |
| EN 60534-2-3:2016 | Industrial-process control valves - Part 2-3: Flow capacity - Test procedures |
| EN 60534-2-4 : 2009 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
| EN 60534-8-4:2015 | Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow |
| EN 60534-5:2004 | Industrial-process control valves - Part 5: Marking |
| EN 60534-3-3:1998 | Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves |
| EN 60534-7:2010 | Industrial-process control valves - Part 7: Control valve data sheet |
| EN 60534-3-2:2001 | Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves |
| EN 60534-8-2:2011 | Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| EN 61333:1998 | Marking on U and E ferrite cores |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.