• There are no items in your cart

IEC 60603-2:1995

Current

Current

The latest, up-to-date edition.

Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

22-09-1995

FOREWORD
1 Scope
2 Normative references
3 IEC type designation
4 Common features
    4.1 Mounting dimensions
    4.2 Mating information
    4.3 Survey of styles
5 Dimensions
    5.1 General
    5.2 Fixed board connectors
    5.3 Free board connectors
    5.4 Mating information
    5.5 Accessories
    5.6 Mounting information for fixed board connectors
    5.7 Mounting information for free board connectors
6 Gauges
    6.1 Sizing gauges and retention force gauges
    6.2 Test panel (for voltage proof test)
7 Characteristics
    7.1 Climatic category
    7.2 Electrical
    7.3 Mechanical
8 Test schedule
    8.1 General
9 Quality assessment procedures
    9.1 Qualification approval testing
    9.2 Quality conformance inspection
    9.3 Delayed delivery, re-inspection
10 Ordering information
Annexes
A Test phase BP 3.2: Corrosion, industrial atmosphere
B Special contacts for connectors Style M

IEC 60603-2:1995 applies to groups of related connectors for use with printed boards. They range from connectors with high contact density for low-voltage applications (Styles B and C) to connectors for heavy currents and high voltages having fewer contacts (Styles D, E, F, G and H). It also applies to Style M two-part connectors supplied in alternative versions having 2, 4 or 6 holes for fitting special contacts, for example coaxial, for high voltages or heavy currents (see annex B), as well as 78, 60 or 42 normal contacts identical with those of style C. It applies further to two-part connectors of Styles Q, R, S, T, U and V whose male contacts are fitted to the fixed board connectors and the female contacts to the free board connectors. All these connectors have the same fitting characteristics irrespective of their various utilization characteristics. The part of the connector fitted to the board is provided with terminations suitable for printed boards in accordance with IEC 60326-3 using a grid of 2,54 mm (0,1 in), as defined in IEC 60097. The free board connectors are provided either with solder or flat quick-connect terminations. The fixed board connectors are provided either with solder, insulation displacement, wrapped connections or with screw terminals and flat quick-connect terminations. The terminations of the fixed board connectors are located in such a way as to be suitable for use with mother boards using a grid of 2,54 mm (0,1 in) as defined in IEC 60097 as well as for automating wiring techniques.

Committee
TC 48/SC 48B
DevelopmentNote
Also numbered as BS EN 60603-2 & QC 010000XX0002. (11/2005) Stability Date: 2017. (10/2012)
DocumentType
Standard
Pages
182
PublisherName
International Electrotechnical Committee
Status
Current
Supersedes

BS IEC 821 : 1992 AMD 8349 IEC 821 VMEBUS. MICROPROCESSOR SYSTEM BUS FOR 1 BYTE TO 4 BYTE DATA
DIN 41612-7:1985-06 TWO-PART CONNECTORS FOR PRINTED BOARD, GRID 2,54 MM; DIMENSIONS OF TYPES U AND V
BS EN 60297-3-101:2004 Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) series Subracks and associated plug-in units
DIN 41612-8:1987-10 TWO-PART CONNECTORS FOR PRINTED BOARDS, GRID 2,54 MM; DIMENSIONS OF TYPE M
DIN 41612-2:1987-10 TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPES B, C AND D
17/30345656 DC : 0 BS EN 62148-1 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 1: GENERAL AND GUIDANCE
03/100395 DC : DRAFT APR 2003 EN 175101-809 - DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY
BS 6475:1984 Specification for processor system bus interface (Eurobus A)
DIN 41612-6:1990-06 TWO-PART CONNECTORS FOR PRINTED BOARD; GRID 2,54 MM; DIMENSIONS OF TYPES Q, R AND S
CSA ISO/IEC 15776 :2004 VME64BUS - SPECIFICATION
CSA ISO/IEC 15776 : 2004 : R2012 VME64BUS - SPECIFICATION
IEEE DRAFT 1101.10 : D5.0 MAY 96 DRAFT STANDARD FOR ADDITIONAL MECHANICAL SPECIFICATIONS FOR MICROCOMPUTERS USING THE 1101.1 EQUIPMENT PRACTICE
EN 60821:1994/corrigendum:1994 IEC 60821 VMEbus - Microprocessor system bus for 1 byte to 4 byte data
EN 61076-4-113:2003 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
EN 60297-3-101:2004 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units
I.S. EN 60297-3-101:2004 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES - PART 3-101: SUBRACKS AND ASSOCIATED PLUG-IN UNITS
98/231544 DC : DRAFT JULY 1998
BS ISO/IEC 10861:1994 Information technology. Microprocessor systems. High-performance synchronous 32-bit bus: MULTIBUS II
IEC 62148-1:2017 Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance
CEI EN 60297-3-104 : 2006 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES - PART 3-104: CONNECTOR DEPENDENT INTERFACE DIMENSIONS OF SUBRACKS AND PLUG-IN UNITS
DIN 41612-1:1988-01 TWO-PART CONNECTORS FOR PRINTED BOARD, GRID 2,54 MM; COMMON MOUNTING FEATURES, SURVEY OF TYPES
DIN 41612-9:1987-10 TWO-PART CONNECTORS FOR PRINTED BOARDS; GRIP 2,54 MM; DIMENSIONS OF TYPE E
I.S. EN IEC 62148-1:2018 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 1: GENERAL AND GUIDANCE
BS EN 60297-4:1995 Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) series Subracks and associated plug-in units. Additional dimensions
EN IEC 62148-1:2018 Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance
NF EN 61076 4 113 : 2005 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS
IEC 60297-5-100:2001 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-100: Subracks and associated plug-in units - Design overview
05/30134095 DC : DRAFT MAY 2005 IEC 61587-1 ED 2 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND 60297 - PART 1: CLIMATIC, MECHANICAL TESTS AND SAFETY ASPECTS FOR CABINETS, RACKS AND SUBRACKS
BS EN 60297-3-104:2006 Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6mm(19 in) series Connector dependent interface dimensions of subracks and plug-in units
IEC 60297-5-107:2001 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-107: Subracks and associated plug-in units - Rear-mounted plug-in units
BS EN 60297-5-100:2001 Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) series. Subracks and associated plug-in units Design overview
DIN 41494-5 : 1986 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT; MECHANICAL STRUCTURES OF THE 482,6 MM (19") SERIES; DIMENSIONS OF SUBRACKS AND PLUG-IN UNITS
BS EN 61076-4-113:2003 Connectors for electronic equipment Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
CEI EN 60297-3-101 : 2005 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES - PART 3-101: SUBRACKS AND ASSOCIATED PLUG-IN UNITS
EN 175101-809:2004/corrigendum Jun. 2005 DETAIL SPECIFICATION: TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY
IEC 61076-4-113:2002 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
IEC 60297-4:1995+AMD1:1999 CSV Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 4: Subracks and associated plug-in units - Additional dimensions
05/30135124 DC : DRAFT JUN 2005 IEC 61587-1 ED 2 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND 60297 - PART 1: CLIMATIC, MECHANICAL TESTS AND SAFETY ASPECTS FOR CABINETS, RACKS AND SUBRACKS
CEI EN 60821 : 1996 IEC 821 VMEBUS - MICROPROCESSOR SYSTEM BUS FOR 1 BYTE TO 4 BYTE DATA
97/206256 DC : DRAFT MAY 1997 IEC 60297-5: DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482.6 MM (19 INCH) SERIES - PART 5: SUBRACKS AND ASSOCIATED PLUG-IN FOR EMC, ESD INJECTOR/EXTRACTOR - KEYING ETC. FOR IEC 603-2 CONNECTORS
BS 7241:1989 Specification for IEC 822 VSB: parallel sub-system bus of the IEC 821 VME bus
DIN 41612-3:1987-10 TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPES F AND G
ISO/IEC 10859:1997 Information technology — 8-bit backplane interface: STEbus and mechanical core specifications for microcomputers
I.S. EN 61076-4-113:2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS
BS 7242:1990 Specification for IEC 821 bus: microprocessor system bus for 1 to 4 byte data
CAN/CSA-ISO/IEC 15776-04 (R2017) VME64bus - Specification (Adopted ISO/IEC 15776:2001, first edition, 2001-12)
ETR 194 : 20001 EQUIPMENT ENGINEERING (EE); CONNECTOR FOR ITU-T DEFINED G. SERIES DIGITAL HIERARCHY INTERFACES
I.S. EN 60297-3-104:2006 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES - PART 3-104: CONNECTOR DEPENDENT INTERFACE DIMENSIONS OF SUBRACKS AND PLUG-IN UNITS
BS EN 60297-5-107:2001 Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) series. Subracks and associated plug-in units Rear mounted plug-in units
IEC 60796-3:1990 Microprocessor system bus - 8-bit and 16-bit data (MULTIBUS I) - Part 3: Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors
BS EN 60821:1995 IEC 821 VMEbus. Microprocessor system bus for 1 byte to 4 byte data
IEC 60821:1991 VMEbus - Microprocessor system bus for 1 byte to 4 byte data
IEC 60297-3-101:2004 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units
BS 5954-3:1985 Dimensions of mechanical structures of the 482.6 mm (19 in) series Specification for subracks and associated plug-in units
10/30219087 DC : 0 BS EN 61587-1 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 1: ENVIRONMENTAL REQUIREMENTS AND TESTS, SAFETY ASPECTS FOR FOR CABINETS, RACKS, SUBRACKS AND CHASSIS
DIN 41612-4:1987-10 TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPE H
DIN 41612-10:1987-10 TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; GAUGES
BS EN 175101-809:2004 Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality
BS 7588:1993 Guide to hierarchical interconnection technology
I.S. EN 175101-809:2004 DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2.54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75101-801, WITH ASSESSED QUALITY
IEC 60297-3-104:2006 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units
EN 60297-5-100:2001 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-100: Subracks and associated plug-in units - Design overview
EN 60297-4:1995/A1:1999 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482.6 MM (19 IN) SERIES - SUBRACKS AND ASSOCIATED PLUG-IN UNITS - ADDITIONAL DIMENSIONS
EN 60297-3-104:2006 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units
EN 60297-5-107:2001 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-107: Subracks and associated plug-in units - Rear mounted plug-in units

ISO 272:1982 Fasteners — Hexagon products — Widths across flats
IEC 60512-8:1993 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
IEC 60512-6:1984 Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 6: Climatic tests and soldering tests
IEC 60512-7:1993 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests
IEC 60097:1991 Grid systems for printed circuits
IEC 60352-1:1997 Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance
IEC 60410:1973 Sampling plans and procedures for inspection by attributes
ISO 468:1982 Surface roughness — Parameters, their values and general rules for specifying requirements
IEC 60194:2015 Printed board design, manufacture and assembly - Terms and definitions
IEC 60512-4:1976 Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 4: Dynamic stress tests
IEC 60512-9:1992 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 9: Miscellaneous tests
IEC 60512-5:1992 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests
IEC 60512-1:2001 Connectors for electronic equipment - Tests and measurements - Part 1: General
IEC 60326-3:1991 Printed boards - Part 3: Design and use of printed boards
IEC 60512-3:1976 Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests

€358.68
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.