IEC 60605-3-3:1992
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Equipment reliability testing - Part 3: Preferred test conditions - Section 3: Test Cycle 3: Equipment for stationary use in partially weatherprotected locations - Low degree of simulation
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
05-02-2009
English - French
20-11-1992
Contents
Foreword
Introduction
Clause
1. Scope
2. Normative references
3. Definitions
4. Applicability
4.1 Type of equipment
4.2 Operating conditions
4.3 Environmental conditions
4.4 Degree of simulation
4.5 Examples
5. Basic assumptions underlying the severities
5.1 Operating conditions
5.2 Climatic conditions
5.3 Mechanical conditions
5.4 Other conditions
6. Pre-exposure tests
6.1 Sand and dust test
6.2 Salt mist test
7. Description of the test cycle
7.1 Relevant period of equipment life covered by
the test cycle
7.2 Operating conditions
7.3 Climatic conditions
7.4 Interference by transient voltages
7.5 Mechanical conditions
8. Relevant test time
Figure 1 - Test cycle
Applies to equipment installed in partially weather-protected locations in a climate belonging to the group of 'moderate' climates covered by IEC 60721-2-1. Contains preferred test conditions as referred to in 8.4 of IEC 60605-1. The test cycle provided here is not intended to replace tests for other purposes, such as qualification, functional performance, environmental tests and tests aiming at the verification of the ability to survive or function during extreme conditions of storage, transportation or use.
DevelopmentNote |
Also numbered as BS 5760-13.3(1993) (08/2005)
|
DocumentType |
Standard
|
Pages |
29
|
PublisherName |
International Electrotechnical Committee
|
Status |
Withdrawn
|
Standards | Relationship |
CEI 56-19 : 2000 | Identical |
CEI 56-46 : 2005 | DEPENDABILITY MANAGEMENT - PART 3-5: APPLICATION GUIDE - RELIABILITY TEST CONDITIONS AND STATISTICAL TEST PRINCIPLES |
EN 60300-3-4:2008 | Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements |
UNE-EN 62059-31-1:2010 | Electricity metering equipment - Dependability -- Part 31-1: Accelerated reliability testing - Elevated temperature and humidity |
BS 5760-4:2003 | Reliability of systems, equipment and components Guide to the specification of dependability requirements |
BS EN 62059-41:2006 | Electricity metering equipment. Dependability Reliability prediction |
CEI EN 62059-31-1 : 2009 | ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 31-1: ACCELERATED RELIABILITY TESTING - ELEVATED TEMPERATURE AND HUMIDITY |
CEI EN 62059-41 : 2007 | ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 41: RELIABILITY PREDICTION |
NF EN 61014 : 2003 | PROGRAMMES FOR RELIABILITY GROWTH |
CEI EN 60300-3-4 : 2010 | DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS |
I.S. EN 62059-41:2006 | ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 41: RELIABILITY PREDICTION |
IEC TR 62063:1999 | High-voltage switchgear and controlgear - The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear |
IEC 62059-41:2006 | Electricity metering equipment - Dependability - Part 41: Reliability prediction |
UNE-EN 60300-3-4:2011 | Dependability management -- Part 3-4: Application guide - Guide to the specification of dependability requirements |
BS EN 62059-31-1:2008 | Electricity metering equipment. Dependability Accelerated reliability testing. Elevated temperature and humidity |
BS EN 60300-3-4:2008 | Dependability management Application guide. Guide to the specification of dependability requirements |
I.S. EN 62059-31-1:2008 | ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 31-1: ACCELERATED RELIABILITY TESTING - ELEVATED TEMPERATURE AND HUMIDITY |
I.S. EN 60300-3-4:2008 | DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS |
IEC 60300-3-4:2007 | Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements |
EN 62059-31-1 : 2008 | ELECTRICITY METERING EQUIPMENT - DEPENDABILITY - PART 31-1: ACCELERATED RELIABILITY TESTING - ELEVATED TEMPERATURE AND HUMIDITY |
EN 62059-41:2006 | Electricity metering equipment - Dependability - Part 41: Reliability prediction |
IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
IEC 60721-2-1:2013 | Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and humidity |
IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV | Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations |
IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
IEC 60068-2-52:2017 | Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.