• IEC 60684-2:2011

    Current The latest, up-to-date edition.

    Flexible insulating sleeving - Part 2: Methods of test

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French

    Published date:  10-08-2011

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 General
    2 Test conditions
    3 Measurements of bore, wall thickness and concentricity
    4 Density
    5 Resistance to splitting after heating
    6 Heat shock (resistance to heat)
    7 Resistance to soldering heat
    8 Loss in mass on heating of uncoated textile glass
       sleeving
    9 Longitudinal change
    10 Deformation under load (resistance to pressure at
       elevated temperature)
    11 Thermal stability of PVC sleeving
    12 Volatile content of silicone sleeving
    13 Bending after heating
    14 Bending at low temperature
    15 Brittleness temperature
    16 Dimensional stability on storage (applicable to
      heat-shrinkable sleeving only)
    17 Hydrolysis of coating
    18 Flexibility (extruded sleeving only)
    19 Tensile strength, tensile stress at 100% elongation,
       elongation at break and secant modulus at 2% elongation
    20 Fraying resistance test
    21 Breakdown voltage
    22 Insulation resistance
    23 Volume resistivity
    24 Permittivity and dissipation factor
    25 Resistance to tracking
    26 Flame propagation tests
    27 Oxygen index
    28 Transparency
    29 Ionic impurities test
    30 Silver staining test
    31 Electrolytic corrosion resistance
    32 Corrosion resistance (tensile and elongation)
    33 Copper corrosion (presence of corrosive volatiles)
    34 Colour fastness to light
    35 Resistance to ozone
    36 Resistance to selected fluids
    37 Thermal endurance
    38 Mass per unit length
    39 Heat ageing
    40 Water absorption
    41 Restricted shrinkage (applicable to heat-shrinkable
       sleeving only)
    42 Colour stability to heat
    43 Smoke index
    44 Toxicity index
    45 Halogen content
    46 Acid gas generation
    47 Hot elongation and hot set
    48 Tension set (applicable to elastomeric sleeving only)
    49 Tear propagation (applicable to elastomeric sleeving only)
    50 Long term heat ageing (3000 h)
    51 Dynamic shear at ambient temperature
    52 Dynamic shear at elevated temperature
    53 Dynamic shear after heat shock and heat ageing
    54 Rolling drum peel to aluminium
    55 Aluminium rod dynamic shear
    56 Sealing
    57 Adhesive T peel strength of two bonded heat-shrinkable
       substrates
    58 Circumferential extension
    59 Voltage proof
    60 Thermal shock
    Bibliography

    Abstract - (Show below) - (Hide below)

    IEC 60684-2:2011 gives methods of test for flexible insulating sleeving, including heat-shrinkable sleeving, intended primarily for insulating electrical conductors and connections of electrical apparatus, although they may be used for other purposes. The tests specified are designed to control the quality of the sleeving but it is recognized that they do not completely establish the suitability of sleeving for impregnation or encapsulation processes or for other specialized applications. Where necessary, the test methods in this part will need to be supplemented by appropriate impregnation or compatibility tests to suit the individual circumstances. The main changes from the previous edition are as follows: three additional methods for circumferential extension, voltage proof and thermal shock and alignment with North American methods.

    General Product Information - (Show below) - (Hide below)

    Committee TC 15
    Development Note Stability Date: 2020. (09/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    08/30195225 DC : 0 BS EN 60684-3-283 ED.1 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 283: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, FOR BUS-BAR INSULATION
    CEI 18-49 : 2013 ELECTRICAL INSTALLATIONS IN SHIPS - PART 350: GENERAL CONSTRUCTION AND TEST METHODS OF POWER, CONTROL AND INSTRUMENTATION CABLES FOR SHIPBOARD AND OFFSHORE APPLICATIONS
    BS EN 60684-3-233:2006 Flexible insulating sleeving Specifications for individual types of sleeving - Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
    NF EN 60684-3-285 : 2016 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 285: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, FOR MEDIUM VOLTAGE JOINT INSULATION
    NF EN 60684 3 229 : 2003 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS REQUIREMENTS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 229: HEAT-SHRINKABLE SEMI-FLEXIBLE, POLYVINYLIDENE FLUORIDE SLEEVING, FLAME RETARDED, FLUID RESISTANT, SHRINK RATIO 2:1
    BS EN 60684-3-409:1999 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Glass textile sleeving with polyurethane (PUR)-based coating
    IEC 63010-1:2017 Halogen-free thermoplastic insulated and sheathed flexible cables of rated voltages up to and including 300/300 V - Part 1: General requirements and cables
    NF EN 60684-3-282 : 2010 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 282: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, STRESS CONTROL
    BS EN 60684-3-116:2011 Flexible insulating sleeving Specifications for individual types of sleeving. Sheets 116 and 117: Extruded polychloroprene, general purpose
    I.S. EN 60684-3-284:2014 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 284: HEAT-SHRINKABLE, SLEEVINGS, FOR OIL BARRIER APPLICATIONS
    BS EN 50363-0:2011 Insulating, sheathing and covering materials for low-voltage energy cables General introduction
    UNE-EN 50525-1:2012 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements
    CEI EN 50143 : 2012 CABLES FOR SIGNS AND LUMINOUS-DISCHARGE-TUBE INSTALLATIONS OPERATING FROM A NO-LOAD RATED OUTPUT VOLTAGE EXCEEDING 1000 V BUT NOT EXCEEDING 10000 V
    BS EN 60684-3-343 to 345:2002 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated
    I.S. EN 60684-3-320:2002 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 320: POLYETHYLENE TEREPHTHALATE TEXTILE SLEEVING, LIGHTLY IMPREGNATED
    BS EN 50306-2:2002 Railway applications. Railway rolling stock cables having special fire performance. Thin wall Single core cables
    96/201078 DC : DRAFT FEB 1996 IEC 60684-3-217 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION REQUIREMENTS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 217: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, FLAME RETARDED, SHRINK RATIO 3:1
    BS EN 50143:2009 Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1000 V but not exceeding 10000 V
    CEI EN 60684-3-151 : 1999 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 151: EXTRUDED PVC/NITRILE RUBBER - GENERAL PURPOSE
    BS EN 50363-2-2:2005 Insulating, sheathing and covering materials for low voltage energy cables Cross-linked elastomeric covering compounds
    BS EN 50393:2015 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
    BS 7933-2:2007 Electric cables. Accessories. Material characterisation Fingerprinting and type tests for heat shrinkable components for low voltage applications
    BS EN 60684-3-240 to 243:2002 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Heat-shrinkable PTFE sleeving
    NFC 33 009-2 : 2008 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
    CEI EN 50290-2-36 : 1ED 2017 COMMUNICATION CABLES - PART 2-36: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED SILICONE RUBBER INSULATION COMPOUND
    15/30320914 DC : 0 BS EN 4708-104 - AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 104: SEMI-RIGID POLYVINYLIDENE FLUORIDE - TEMPERATURE RANGE -55 DEGREES C AND 175 DEGREES C
    14/30289997 DC : 0 BS EN 62893-1 - CHARGING CABLES FOR ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS
    BS EN 60684-3-211:2007 Flexible insulating sleeving Specifications for individual types of sleeving - Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
    BS EN 60684-3.246 : 2007 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 246: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED
    NFC 32 201-14 : 2003 CABLES OF RATED VOLTAGE UP TO AND INCLUDING 450/750 V AND HAVING THERMOPLASTIC INSULATION - PART 14: FLEXIBLE CABLES (CORDS), INSULATED AND SHEATHED WITH HALOGEN-FREE THERMOPLASTIC COMPOUNDS
    BS EN 50363-9-1:2005 Insulating, sheathing and covering materials for low-voltage energy cables Miscellaneous insulating compounds. Cross-linked polyvinyl chloride (XLPVC)
    BS EN 60684-3-165:2004 Flexible insulating sleeving. Specifications for individual types of sleeving Extruded Polyolefin, flame retarded, limited fire hazard sleeving
    BS EN 60684-1:2003 Flexible insulating sleeving Definitions and general requirements
    IEC 60092-376:2017 Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
    BS EN 60684-3-216 : 2005 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 216: HEAT-SHRINKABLE, FLAME-RETARDED, LIMITED-FIRE HAZARD SLEEVING
    PREN 4708-101 : DRAFT 2015 AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 101: POLYOLEFIN SLEEVING - OPERATING TEMPERATURES -55 DEGREES C TO 135 DEGREES C - PRODUCT STANDARD
    PREN 4708-104 : DRAFT 2016 AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 104: SEMI-RIGID POLYVINYLIDENE FLUORIDE (PDVF) - OPERATING TEMPERATURE -55 DEGREES C TO 175 DEGREES C - PRODUCT STANDARD
    CEI EN 60684-3-116 : 2012 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEETS 116 AND 117: EXTRUDED POLYCHLOROPRENE, GENERAL PURPOSE
    PREN 50655-2 : DRAFT 2015 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 2: FINGERPRINTING FOR HEAT SHRINKABLE COMPONENTS FOR LOW AND MEDIUM VOLTAGE APPLICATIONS UP TO 20,8/36 (42) KV
    I.S. EN 60684-3-214:2014 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 214: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, NOT FLAME RETARDED, THICK AND MEDIUM WALL
    CEI EN 60684-3-228 : 2005 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 228: HEAT-SHRINKABLE, SEMI-RIGID POLYVINYLIDENE FLUORIDE SLEEVING, FLAME RETARDED, FLUID RESISTANT, SHRINK RATIO 2:1
    I.S. EN 60684-3-123 AND 124:1997 SPECIFICATION FOR FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION REQUIREMENTS FOR INDIVIDUAL TYPES OF SLEEVING - SHEETS 123 AND 124: EXTRUDED SILICONE SLEEVING, GENERAL PURPOSE
    I.S. EN 50363-0:2011 INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW-VOLTAGE ENERGY CABLES - PART 0: GENERAL INTRODUCTION
    I.S. EN 60684-1:2003 FLEXIBLE INSULATING SLEEVING - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS
    I.S. EN 50363-10-2:2005 INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 10-2: MISCELLANEOUS SHEATHING COMPOUNDS - THERMOPLASTIC POLYURETHANE
    I.S. EN 60684-3-217:2000 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 217: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, FLAME RETARDED SHRINK RATIO 3:1
    CEI EN 60684-3-247 : 2012 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL
    HD 631.2 : 2007 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
    BS EN 60684-3-212:2006 Flexible insulating sleeving Specifications for individual types of sleeving - Heat-shrinkable polyolefin sleevings
    UNE-IEC 60092-360:2015 Electrical installations in ships - Part 360: Insulating and sheathing materials for shipboard and offshore units, power, control, instrumentation and telecommunication cables
    I.S. EN 50363-7:2005 INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 7: HALOGEN-FREE, THERMOPLASTIC INSULATING COMPOUNDS
    I.S. EN 60684-3-248:2007 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 248: GENERAL PURPOSE, HEAT-SHRINKABLE, DUAL WALL POLYOLEFIN SLEEVING, FLAME RETARDED, SHRINK RATIOS 2:1, 3:1, 4:1
    NFC 32 102-13 : 2007 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 13: HALOGEN-FREE FLEXIBLE CABLES HAVING LOW EMISSION OF SMOKE
    NF EN 50143 : 2009 CABLES FOR SIGNS AND LUMINOUS-DISCHARGE-TUBE INSTALLATIONS OPERATING FROM A NO-LOAD RATED OUTPUT VOLTAGE EXCEEDING 1000 V BUT NOT EXCEEDING 10000 V
    NF EN 60684 3 121 TO 124 : 2003 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEETS 121 TO 124: EXTRUDED SILICONE SLEEVING
    I.S. EN 60684-3-216:2005 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 216: HEAT-SHRINKABLE, FLAME-RETARDED, LIMITED-FIRE HAZARD SLEEVING
    I.S. EN 50363-2-1:2005 INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 2-1: CROSS-LINKED ELASTOMERIC SHEATHING COMPOUNDS
    I.S. EN 60684-3-212:2006 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 212: HEAT-SHRINKABLE POLYOLEFIN SLEEVINGS
    IEC 60684-3-247:2011+AMD1:2016 CSV Flexible insulating sleeving - Part 3 Specifications for individual types of sleeving - Sheet 247: Heatshrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall
    UNE-EN 50393:2015 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
    EN 50363-2-1 : 2005 AMD 1 2011 INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 2-1: CROSS-LINKED ELASTOMERIC SHEATHING COMPOUNDS
    EN 50363-8 : 2005 AMD 1 2011 INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 8: HALOGEN-FREE, THERMOPLASTIC SHEATHING COMPOUNDS
    EN 60684-3-406 to 408:2003 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating
    EN 60684-3-281 : 2010 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 281: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, SEMICONDUCTIVE
    EN 60243-1:2013 ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013)
    EN 60684-3-229:2003 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1
    EN 50363-10-1:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 10-1: Miscellaneous sheathing compounds - Cross-linked polyvinyl chloride (XLPVC)
    EN 60684-3-282 : 2010 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 282: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING - STRESS CONTROL
    EN 60684-3-320:2002 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated
    EN 60684-3-272:1998 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 272: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1, thin wall
    EN 50525-1:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements
    EN 60684-3-240 to 243:2002 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 240 to 243: Heat-shrinkable PTFE sleeving
    EN 60684-3-228:2004 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1
    EN 60684-3-211:2007 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
    EN 60684-3-145 to 147:2001 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 145 to 147: Extruded PTFE sleeving
    EN 60684-3-218:1998 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 218: Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 3:1
    EN 50363-9-1:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 9-1: Miscellaneous insulating compounds - Cross-linked polyvinyl chloride (XLPVC)
    EN 60684-3-209:2010 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 209: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, GENERAL PURPOSE, FLAME RETARDED
    EN 50382-1 : 2008 AMD 1 2013 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK HIGH TEMPERATURE POWER CABLES HAVING SPECIAL FIRE PERFORMANCE - PART 1: GENERAL REQUIREMENTS
    EN 60684-3-271:2011 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1
    EN 50264-1:2008 Railway applications - Railway rolling stock power and control cables having special fire performance - Part 1: General requirements
    EN 60684-3-284:2014 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 284: Heat-shrinkable, sleevings, for oil barrier applications
    EN 50363-6 : 2005 AMD 1 2011 INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 6: HALOGEN-FREE, CROSS-LINKED SHEATHING COMPOUNDS
    EN 60684-1:2003 Flexible insulating sleeving - Part 1: Definitions and general requirements
    EN 60684-3-136:1998 Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose
    HD 22.13 : 200S2 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 13: HALOGEN-FREE FLEXIBLE CABLES HAVING LOW EMISSION OF SMOKE
    EN 50363-7:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 7: Halogen-free, thermoplastic insulating compounds
    BS EN 4708-001:2014 Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification Technical specification
    CEI EN 60684-3-248 : 2008 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 248: GENERAL PURPOSE, HEAT-SHRINKABLE, DUAL WALL POLYOLEFIN SLEEVING, FLAME RETARDED, SHRINK RATIOS 2:1, 3:1, 4:1
    BS IEC 60092-306:2009 Electrical installations in ships Equipment. Luminaires and lighting accessories
    EN 60684-3-100 to 105:2001 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving
    13/30283194 DC : 0 BS EN 4708-101 - AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 101: POLYOLEFIN SLEEVING
    NFC 1993 643 201 : 1993 SPECIFICATION FOR FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION REQUIREMENTS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 201: HEAT SHRINKABLE SLEEVING, GENERAL PURPOSE, FLEXIBLE, CROSS-LINKED PVC, SHRINK RATIO 2:1
    04/30091878 DC : DRAFT FEB 2004 BS EN ISO 13000-2 - PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    08/30195213 DC : 0 BS EN 60684-3-280 ED.1 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 280: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, ANTI-TRACKING
    BS EN 60684-3-285:2014 Flexible insulating sleeving Specifications for individual types of sleeving. Sheet 285: Heat-shrinkable polyolefin sleeving, for medium voltage joint insulation
    BS EN 60684-3-282:2010 Flexible insulating sleeving Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving. Stress control
    11/30258054 DC : 0 BS EN 60243-1 - ELECTRICAL STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES
    BS EN 60684-3-116 and 117:2003 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Extruded polychloroprene. General purpose
    05/30133180 DC : 0 EN 50382-1 - RAILWAY APPLICATIONS - HIGH TEMPERATURE POWER CABLES FOR RAILWAY ROLLING STOCK AND HAVING SPECIAL FIRE PERFORMANCE - PART 1: GENERAL REQUIREMENTS
    16/30342317 DC : 0 BS EN 4708-102 - AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 102: VERY FLEXIBLE POLYMER - TEMPERATURE RANGE -75 DEGREES C TO 150 DEGREES C - PRODUCT STANDARD
    98/260972 DC : DRAFT MAR 1998 IEC 60684-3-247 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION REQUIREMENTS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING - DUAL-WALL, NOT FLAME RETARDED, SHRINK RATIO 3:1
    I.S. EN 60684-3-121 TO 124:2001 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEETS 121 TO 124: EXTRUDED SILICONE SLEEVING
    NF EN 60684-3-281 : 2010 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 281: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, SEMICONDUCTIVE
    15/30332964 DC : 0 BS EN 4708-301 - AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 301: ADHESIVE LINED POLYOLEFIN SLEEVINGS. TEMPERATURE RANGE -55 DEGREES C TO 105 DEGRESS C - PRODUCT STANDARD
    BS EN 4708-101:2017 Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification Polyolefin sleeving. Operating temperatures -55 °C to 135 °C. Product standard
    NF EN 50306-4 : 2003 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK CABLES HAVING SPECIAL FIRE PERFORMANCE - THIN WALL - PART 4: MULTICORE AND MULTIPAIR CABLES STANDARD WALL SHEATHED
    DIN IEC 60684-3-201 : 1996 SPECIFICATION FOR FLEXIBLE INSULATION SLEEVING - PART 3: SPECIFICATION REQUIREMENTS FOR INDIVIDUAL TYPES OF SLEEVING; SHEET 201: HEAT SHRINKABLE SLEEVING, GENERAL PURPOSE, FLEXIBLE, CROSS-LINKED PVC, SHRINK RATIO 2:1
    BS EN 60684-3-136:1998 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Extruded fluorosilicone sleeving. General purpose
    13/30267304 DC : 0 BS EN 60684-3-285 ED 1.0 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 285: HEAT-SHRINKABLE POLYOLEFIN SLEEVING; FOR MEDIUM VOLTAGE JOINT INSULATION
    CEI EN 60684-3-285 : 2016 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 285: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, FOR MEDIUM VOLTAGE JOINT INSULATION
    CEI EN 60684-3-212 : 2006 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 212: HEAT-SHRINKABLE POLYOLEFIN SLEEVINGS
    BS EN 4708-104:2017 Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification Semi-rigid polyvinylidene fluoride (PDVF). Operating temperature - 55 °C to 175 °C. Product Standard
    BS EN 60684-3-145 to 147:2001 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Extruded PTFE sleeving
    CEI EN 60684-3-209 : 2012 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 209: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, GENERAL PURPOSE, FLAME RETARDED
    BS EN 60684-3-229:2003 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1
    PREN 4708-301 : DRAFT 2016 AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 301: ADHESIVE LINED POLYOLEFIN SLEEVINGS - OPERATING TEMPERATURE -55 DEGREES C TO 105 DEGREES C - PRODUCT STANDARD
    NF EN 60684 3 343 TO 345 : 2003 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEETS 343 TO 345: EXPANDABLE BRAIDED ETHYLENE CHLOROTRIFLUOROETHYLENE (E-CTFE) TEXTILE SLEEVING, UNCOATED
    PREN 4708-102 : DRAFT 2017 AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 102: VERY FLEXIBLE POLYMER - OPERATING TEMPERATURE -75 DEGREES C TO 150 DEGREES C - PRODUCT STANDARD
    NF EN 60684-1 : 2003 FLEXIBLE INSULATING SLEEVING - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS
    I.S. EN 60684-3-420 TO 422:2002 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEETS 420 TO 422: POLYETHYLENE TEREPHTHALATE TEXTILE SLEEVING WITH ACRYLIC BASED COATING
    I.S. EN 60684-3-218:1999 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 218: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, NOT FLAME RETARDED SHRINK RATIO 3:1
    I.S. HD 22.9:2007 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 9: SINGLE CORE HALOGEN-FREE NON-SHEATHED CABLES FOR FIXED WIRING HAVING LOW EMISSION OF SMOKE
    UNE-IEC 60092-306:2010 Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories
    I.S. EN 50363-10-1:2005 INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 10-1: MISCELLANEOUS SHEATHING COMPOUNDS - CROSS-LINKED POLYVINYL CHLORIDE (XLPVC)
    NF EN 60684 3 123 AND 124 : 1995
    I.S. EN 60684-3-246:2007 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 246: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED
    UNE-IEC 60092-350:2015 Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
    I.S. EN 60684-3-209:2010 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 209: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, GENERAL PURPOSE, FLAME RETARDED
    I.S. HD 631.2:2007 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
    CEI EN 60684-3-409 : 2001 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 409: GLASS TEXTILE SLEEVING WITH POLYURETHANE (PUR)-BASED COATING
    I.S. EN 50655-2:2017 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 2: FINGERPRINTING FOR HEAT SHRINKABLE COMPONENTS FOR LOW AND MEDIUM VOLTAGE APPLICATIONS UP TO 20,8/36 (42) KV
    NFC 1993 643 406 : 1993 SPECIFICATION POUR GAINES ISOLANTES SOUPLES - TROISIEME PARTIE: SPECIFICATIONS PARTICULIERES AUX TYPES PARTICULIERS DE GAINES - FEUILLES 406 A 408: GAINES EN FIBRE DE VERRE TISSEES AVEC REVETEMENT PVC
    CEI EN 60684-3-300 : 2003 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 300: GLASS TEXTILE FIBRE SLEEVING, BRAIDED, UNCOATED
    EN ISO 13000-1:2005 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2005)
    NF EN 60684 3-165 : 2004 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 165: EXTRUDED POLYOLEFIN, FLAME RETARDED, LIMITED FIRE HAZARD SLEEVING
    ASTM D 350 : 2013 : REDLINE Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
    ASTM D 1675 : 2003 : R2011 Standard Test Methods for Polytetrafluoroethylene Tubing
    I.S. EN 50363-5:2005 INSULATING, SHEATHING AND COVERING MATERIALS FOR LOW VOLTAGE ENERGY CABLES - PART 5: HALOGEN-FREE, CROSS-LINKED INSULATING COMPOUNDS
    IEC 60092-376 REDLINE : 3ED 2017 ELECTRICAL INSTALLATIONS IN SHIPS - PART 376: CABLES FOR CONTROL AND INSTRUMENTATION CIRCUITS 150/250 V (300 V)
    IEC 60092-354:2014 Electrical installations in ships - Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
    IEC TS 62332-3:2016 Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 3: Hermetic motor-compressors
    IEC 60092-353:2016 Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV
    IEC 60092-376:2017 RLV Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
    IEC 60684-3-209:2010 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 209: Heat-shrinkable, polyolefin sleeving, general purpose, flame retarded
    IEC 60684-1:2003 Flexible insulating sleeving - Part 1: Definitions and general requirements
    IEC 60684-3-217:1998 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 217: Heat-shrinkable polyolefin sleeving, flame retarded, shrink ratio 3:1
    EN 50306-1:2002 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 1: General requirements
    I.S. EN ISO 13000-2:2006 PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
    I.S. EN ISO 13000-1:2006 PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 1: REQUIREMENTS AND DESIGNATION
    VDE 0341-3-136 : 1999 FLEXIBLE INSULATING SLEEVING - SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - EXTRUDED FLUOROSILICONE SLEEVING - GENERAL PURPOSE
    DIN EN 60684-3-151 : 1999 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING; SHEET 151: EXTRUDED PVC/NITRILE SLEEVING; GENERAL PURPOSE
    DIN EN 60684-3-136 : 1999 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 136: EXTRUDED FLUOROSILICONE SLEEVING - GENERAL PURPOSE