• IEC 60730-2-8:2000+AMD1:2002+AMD2:2015 CSV

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated watervalves, including mechanical requirements

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  28-09-2021

    Language(s):  English - French

    Published date:  16-12-2015

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Abstract - (Show below) - (Hide below)

    IEC 60730-2-8:2000+A1:2002+A2:2015 Applies to electrically operated water valves for use in, or in association with, equipment for household and similar use (for applications such as heating, air conditioning and similar). Specifies requirements for electrical features of water valves and for mechanical features that affect their intended operation. Applies to the inherent safety, to the operating valves and to the testing of these automatic electrical controls. This consolidated version consists of the second edition (2000),its amendment 1 (2002) and its amendment 2 (2015). Therefore, no need to order amendments in addition to this publication.

    This publication is to be read in conjunction with IEC 60730-1:2010.

    General Product Information - (Show below) - (Hide below)

    Committee TC 72
    Development Note Also numbered as CSA E60730.2.8 (08/2002) To be read in conjunction with IEC 60730-1. (01/2003) Stability Date: 2018. (12/2015)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 60730-2-14 : 1998 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-14: PARTICULAR REQUIREMENTS FOR ELECTRIC ACTUATORS
    CAN/CSA-E60730-2-14:2013 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-14: PARTICULAR REQUIREMENTS FOR ELECTRIC ACTUATORS
    BS EN 61770:2009 Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets
    EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
    BS EN 15091:2013 Sanitary tapware. Electronic opening and closing sanitary tapware
    DIN EN 15200:2007-08 SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
    DIN EN 15091:2014-03 SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
    I.S. EN 14812:2005 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    IEC 60730-2-14:2017 Automatic electrical controls - Part 2-14: Particular requirements for electric actuators
    NF EN 61770 : 2009 ELECTRIC APPLIANCES CONNECTED TO THE WATER MAINS - AVOIDANCE OF BACKSIPHONAGE AND FAILURE OF HOSE SETS
    IEC 61770:2008+AMD1:2015 CSV Electric appliances connected to the water mains - Avoidance ofbacksiphonage and failure of hose-sets
    CSA C22.2 No. 60335.2.24 : 2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-24: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE-MAKERS
    DIN EN 14597:2015-02 TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS
    BS EN 14812 : 2005 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    I.S. EN 14597:2012 TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS
    I.S. EN 15091:2013 SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
    07/19990369 DC : 0 BS EN 806-4 - SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4 - INSTALLATION
    12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
    14/30312005 DC : 0 BS EN 61770: 2009/PRAA: 2014 - ELECTRIC APPLIANCES CONNECTED TO THE WATER MAINS - AVOIDANCE OF BACKSIPHONAGE AND FAILURE OF HOSE-SETS
    I.S. EN 60335-1:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
    BS EN 60335-1 : 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
    UNE-EN 15091:2014 Sanitary tapware - Electronic opening and closing sanitary tapware
    DIN EN 14812 E : 2007 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    CSA C22.2 No. 60335-1:2011 SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 1: GENERAL REQUIREMENTS
    UL 60335-1 : 6ED 2016-10 SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 1: GENERAL REQUIREMENTS
    CAN/CSA-C22.2 NO. 60335-1:11 (R2016) Safety of household and similar appliances - Part 1: General requirements (Tri-national standard, with NMX-J-521/1-ANCE and UL 60335-1)
    UNI EN 14597 : 2012 TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS
    UNI EN 15091 : 2014 SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
    UNI EN 15200 : 2007 SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
    DIN EN 15091 E : 2014 SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
    DIN EN 14597 E : 2015 TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS
    DIN EN 15200 E : 2007 SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
    BS EN 15200:2007 Sanitary appliances. Multifunction shower cabinets
    BS EN 806-2:2005 Specifications for installations inside buildings conveying water for human consumption Design
    BS EN 14597 : 2012 TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS
    EN 15200:2007/AC:2009 SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
    EN 14812:2005+A1:2007 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    EN 14597:2012 TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS
    EN 806-2:2005 Specification for installations inside buildings conveying water for human consumption - Part 2: Design
    EN 15091:2013 SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE
    11/30237915 DC : 0 BS EN 14597 - TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS
    BS PD CLC/TR 50455 : 2008 LIST OF INTERPRETATIONS ON THE EN 60730 SERIES "AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE"
    UNI EN 806-2 : 2008 SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 2: DESIGN
    CLC/TR 50455:2008 List of interpretations on the EN 60730 series "Automatic electrical controls for household and similar use"
    S.R. CLC/TR 50455:2008 LIST OF INTERPRETATIONS ON THE EN 60730 SERIES "AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE"
    IEC 60730-2-14 REDLINE : 2ED 2017 AUTOMATIC ELECTRICAL CONTROLS - PART 2-14: PARTICULAR REQUIREMENTS FOR ELECTRIC ACTUATORS
    I.S. EN 61770:2009 ELECTRIC APPLIANCES CONNECTED TO THE WATER MAINS - AVOIDANCE OF BACKSIPHONAGE AND FAILURE OF HOSE-SETS
    I.S. EN 60730-2-14:1998 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-14: PARTICULAR REQUIREMENTS FOR ELECTRIC ACTUATORS
    DIN EN 806-2:2005-06 Specification for installations inside buildings conveying water for human consumption - Part 2: Design
    UNE-EN 14597:2014 Temperature control devices and temperature limiters for heat generating systems
    DIN EN 14812:2007-09 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
    EN 60730-2-14:1997/A2:2008 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-14: PARTICULAR REQUIREMENTS FOR ELECTRIC ACTUATORS
    EN 61770:2009/A11:2018 ELECTRIC APPLIANCES CONNECTED TO THE WATER MAINS - AVOIDANCE OF BACKSIPHONAGE AND FAILURE OF HOSE-SETS

    Standards Referencing This Book - (Show below) - (Hide below)

    CISPR 14-1:2016 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
    IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
    ISO 4400:1994 Fluid power systems and components — Three-pin electrical plug connectors with earth contact — Characteristics and requirements
    IEC 60038:2009 IEC standard voltages
    ISO 1179-1:2013 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports
    IEC 60738-1:2006+AMD1:2009 CSV Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification
    IEC 60127:1974 Cartridge fuse-links for miniature fuses
    IEC 60384-14:2013+AMD1:2016 CSV Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
    IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
    IEC 60539:1976 Directly heated negative temperature coefficient thermistors
    IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
    IEC 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
    IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
    CISPR 22:2008 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
    IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
    ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
    IEC 60998-2-2:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
    IEC 60707:1999 Flammability of solid non-metallic materials when exposed to flame sources - List of test methods
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    IEC 61058-1:2016 Switches for appliances - Part 1: General requirements
    IEC 60738-1-1:2008 Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application - Assessment level EZ
    IEC 60099-1:1991+AMD1:1999 CSV Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems
    IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
    IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
    IEC 60423:2007 Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings
    ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1
    IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
    IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
    IEC 60664-3:2016 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
    ISO 630:1995 Structural steels Plates, wide flats, bars, sections and profiles
    ISO 4144:2003 Pipework Stainless steel fittings threaded in accordance with ISO 7-1
    ISO 6952:1994 Fluid power systems and components Two-pin electrical plug connectors with earth contact Characteristics and requirements
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    IEC 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
    ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
    IEC 61000-3-2 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
    IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective