IEC 60754-2:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
27-11-2019
Spanish, Castilian
17-11-2011
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Test method principle
5 Test apparatus
6 Test specimen
7 Test procedure
8 Evaluation of the test results
9 Performance requirement
10 Test report
Annex A (informative) - Recommended performance requirements
Bibliography
IEC 60754-2:2011 specifies the apparatus and procedure for the determination of the potential corrosivity of gases evolved during the combustion of materials taken from electric or optical fibre cable constructions by measuring the acidity (pH) and conductivity of an aqueous solution resulting from the gases evolved during the combustion. The general method specified in this standard is intended for the testing of individual components used in a cable construction. Formulae are given for the calculation of a weighted value for a combination of materials found in a specified cable. The use of this method will enable the verification of relevant requirements for either individual components or combined components of a cable construction stated in the appropriate cable specification. A simplified method is included for the testing of individual components where it is required only to demonstrate compliance with a stated performance requirement for quality control purposes. The significant technical changes with respect to the previous edition are as follows:
- improved definition of safety requirements relating to capture of gases;
- introduction of guidance on the preparation of test specimens for more even combustion;
- better expression of tolerances and precision;
- clarification of the conductivity and acidity functions;
- improved definition of the heating procedure;
- greater precision in the definition of the test temperature for the determination of pH value and conductivity;
- correction of the formulae for the calculation of the test results.
Committee |
TC 20
|
DevelopmentNote |
Stability Date: 2018. (11/2017) NEW CHILD AMD 1 IS ADDED.
|
DocumentType |
Standard
|
Pages |
53
|
ProductNote |
NEW CHILD AMD 1 IS ADDED.
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
GOST IEC 60754-2 : 2015 | Identical |
NF EN 60754-2 : 2014 | Identical |
NBN EN 60754-2 : 2014 | Identical |
NEN EN IEC 60754-2 : 2014 | Identical |
AS/NZS IEC 60754.2:2017 | Identical |
PN EN 60754-2 : 2014 | Identical |
DIN EN 60754-2 : 2015 | Identical |
VDE 0482-754-2 : 2015 | Identical |
NEN-EN-IEC 60754-2:2014/A1:2020 | Identical |
UNE-EN 60754-2:2014 | Identical |
BS EN 60754-2:2014 | Identical |
CEI EN 60754-2 : 2015 | Identical |
EN 60754-2:2014 | Identical |
OVE/ONORM EN 60754-2 : 2015 | Identical |
SAC GB/T 17650.2 : 1998 | Identical |
VDE 0472-813 : 1994 | Identical |
CEI 20-37/3 : 2ED 1997 | Identical |
GOST R IEC 60754-2 : 1999 | Identical |
I.S. EN 60754-2:2014/A1:2020 | Identical |
NFC 32 074 : 1993 | Similar to |
HD 602 : 200S1 | Corresponds |
NEN 10754-2 : 1993 | Identical |
CEI 18-49 : 2013 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 350: GENERAL CONSTRUCTION AND TEST METHODS OF POWER, CONTROL AND INSTRUMENTATION CABLES FOR SHIPBOARD AND OFFSHORE APPLICATIONS |
UNE-EN 50290-2-33:2016 | Communication cables - Part 2-33: Common design rules and construction - Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable) |
IEC 63010-1:2017 | Halogen-free thermoplastic insulated and sheathed flexible cables of rated voltages up to and including 300/300 V - Part 1: General requirements and cables |
BS EN 50090-5-2:2004 | Home and building electronic systems (HBES) Media and media dependent layers - Network based on HBES Class 1, Twisted Pair |
07/30164222 DC : 0 | BS EN 60794-2-20 - OPTICAL FIBRE CABLES - PART 2-20: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL DISTRIBUTION CABLES |
15/30272336 DC : 0 | BS EN 50411-3-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-4: FIBRE MANAGEMENT SYSTEM, MODULAR SPLICE AND CONNECTOR WALL BOX, FOR CATEGORY C & A |
EN 50290-2-27 : 2002 COR 2010 | COMMUNICATION CABLES - PART 2-27: COMMON DESIGN RULES AND CONSTRUCTION - HALOGEN FREE FLAME RETARDANT THERMOPLASTIC SHEATHING COMPOUNDS |
07/30164159 DC : 0 | BS EN 60794-2-30 - OPTICAL FIBRE CABLES - PART 2-30: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR OPTICAL FIBRE RIBBON CABLES |
13/30275218 DC : 0 | BS ISO 19700 - CONTROLLED EQUIVALENCE RATIO METHOD FOR THE DETERMINATION OF HAZARDOUS COMPONENTS OF FIRE EFFLUENTS - THE STEADY STATE TUBE FURNACE |
CEI EN 50290-2-36 : 1ED 2017 | COMMUNICATION CABLES - PART 2-36: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED SILICONE RUBBER INSULATION COMPOUND |
14/30289997 DC : 0 | BS EN 62893-1 - CHARGING CABLES FOR ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS |
17/30309558 DC : 0 | BS IEC 60772 ED 2.0 - NUCLEAR POWER PLANTS - INSTRUMENTATION SYSTEMS IMPORTANT TO SAFETY - ELECTRICAL PENETRATION ASSEMBLIES IN CONTAINMENT STRUCTURES |
CEI EN 50290-2-33 : 1ED 2017 | COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION COMPOUNDS FOR MULTI ELEMENT METALLIC CABLES FOR INDOOR INSTALLATION (DATA CABLE) |
I.S. EN 61386-1:2008 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 1: GENERAL REQUIREMENTS |
BS EN 50575 : 2014 | POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS |
NF EN 62329-2 : 2006 | HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST |
UNE-IEC 60092-360:2015 | Electrical installations in ships - Part 360: Insulating and sheathing materials for shipboard and offshore units, power, control, instrumentation and telecommunication cables |
I.S. EN 50290-2-33:2016 | COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION COMPOUNDS FOR MULTI ELEMENT METALLIC CABLES FOR INDOOR INSTALLATION (DATA CABLE) |
I.S. EN 50290-2-26:2002 | COMMUNICATION CABLES - PART 2-26: COMMON DESIGN RULES AND CONSTRUCTION - HALOGEN FREE FLAME RETARDANT INSULATION COMPOUNDS |
NF EN 60695-5-1 : 2003 | FIRE HAZARD TESTING - PART 5-1: CORROSION DAMAGE EFFECTS OF FIRE EFFLUENT - GENERAL GUIDANCE |
IEC 61892-4:2007 | Mobile and fixed offshore units - Electrical installations - Part 4: Cables |
I.S. EN 62329-2:2006 | HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST |
IEC 62821-1:2015 | Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 1: General requirements |
ISO/IEC 14543-3-6:2007 | Information technology Home electronic system (HES) architecture Part 3-6: Media and media dependent layers Network based on HES Class 1, twisted pair |
NF EN 50090-5-2 : 2004 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 5-2: MEDIA AND MEDIA DEPENDENT LAYERS - NETWORK BASED ON HBES CLASS 1, TWISTED PAIR |
03/318326 DC : DRAFT NOV 2003 | |
EN 50290-2-26 : 2002 AMD 1 2007 | COMMUNICATION CABLES - PART 2-26: COMMON DESIGN RULES AND CONSTRUCTION - HALOGEN FREE FLAME RETARDANT INSULATION COMPOUNDS |
EN 187103:2003 | Family specification - Optical fibre cables for indoor applications |
EN 60695-7-2:2011 | Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods |
EN 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
EN 50575:2014/A1:2016 | POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS |
EN 60695-5-1:2003 | Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance |
EN 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
EN 60702-1:2002/A1:2015 | MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 1: CABLES (IEC 60702-1:2002/A1:2015) |
CEI 18-64 : 2008 | MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 4: CABLES |
EN 50151 : 2003 COR 2010 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIAL REQUIREMENTS FOR COMPOSITE INSULATORS |
04/30114758 DC : 0 | IEC 60092-350 ED.3 - ELECTRICAL INSTALLATION IN SHIP - PART 350: SHIPBOARD POWER CABLES - GENERAL CONSTRUCTION AND TEST REQUIREMENTS |
I.S. EN 50151:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIAL REQUIREMENTS FOR COMPOSITE INSULATORS |
I.S. EN 45510-2-9:2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
I.S. EN 60702-1:2002 | MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 1: CABLES |
I.S. EN 50575:2014 | POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS |
PREN 50626-1 : DRAFT 2017 | CONDUIT SYSTEMS BURIED UNDERGROUND FOR THE PROTECTION AND MANAGEMENT OF INSULATED ELECTRICAL CABLES OR COMMUNICATION CABLES - PART 1: GENERAL REQUIREMENTS |
BS EN 50290-2-26:2002 | Communication cables Common design rules and construction. Halogen free flame retardant insulation compounds |
CEI EN 50551-2 : 2014 | SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 2: DETAILED SPECIFICATION AND MINIMUM REQUIREMENTS FOR A 3,0 MM SIMPLEX RUGGEDISED SINGLE MODE FIBRE CABLE TO BE USED FOR PATCHCORDS/CORDS CATEGORY U |
09/30205350 DC : 0 | BS EN 60695-7-2 ED.1 - FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS |
CEI EN 50290-2-37 : 1ED 2017 | COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES |
BS EN 61386-1:2008 | Conduit systems for cable management General requirements |
I.S. EN 50551-2:2013 | SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 2: DETAILED SPECIFICATION AND MINIMUM REQUIREMENTS FOR A 3,0 MM SIMPLEX RUGGEDISED SINGLE MODE FIBRE CABLE TO BE USED FOR PATCHCORDS/CORDS CATEGORY U |
BS EN 50290-2-27:2002+A1:2007 | Communication cables Common design rules and construction. Halogen free flame retardant thermoplastic sheathing compounds |
IEC 60092-354:2014 | Electrical installations in ships - Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U<sub>m</sub> = 7,2 kV) up to 30 kV (U<sub>m</sub> = 36 kV) |
CEI EN 50290-2-38 : 1ED 2017 | COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION FOR COAXIAL CABLES |
I.S. EN 50090-5-2:2004 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 5-2: MEDIA AND MEDIA DEPENDENT LAYERS - NETWORK BASED ON HBES CLASS 1, TWISTED PAIR |
IEC TR 60695-7-2:2002 | Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods |
I.S. EN 60695-7-2:2011 | FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-7-2:2011) |
IEC 60092-350:2014 | Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications |
EN 61936-1 : 2010 AMD 1 2014 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014) |
NF EN 60794-1-1 : 2002 | OPTICAL FIBER CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL |
IEC 61936-1:2010+AMD1:2014 CSV | Power installations exceeding 1 kV a.c. - Part 1: Common rules |
IEC 60092-353:2016 | Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV |
IEC PAS 60794-2-50:2004 | Optical fibre cables - Part 2-50: Indoor optical fibre cables - Family specification for simplex and duplex cables for use in patch cords |
IEC 60092-376:2017 RLV | Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V) |
EN 50090-5-2:2004 | Home and Building Electronic Systems (HBES) - Part 5-2: Media and media dependent layers - Network based on HBES Class 1, Twisted Pair |
PD IEC/TR 62222:2012 | Fire performance of communication cables installed in buildings |
IEC 60695-7-2:2011 | Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods |
CEI EN 60695-7-2 : 2013 | FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS |
12/30273098 DC : 0 | BS EN 60702-1:2002+A1 - MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 1: CABLES |
BS EN 50290-2-38:2016 | Communication cables Common design rules and construction. Polypropylene insulation for coaxial cables |
BS EN 50290-2-33:2016 | Communication cables Common design rules and construction. Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable) |
BS EN 62321-3-2:2014 | Determination of certain substances in electrotechnical products Screening. Total bromine in polymers and electronics by Combustion. Ion Chromatography |
BS 7990:2003 | Tube furnace method for the determination of toxic product yields in fire effluents |
16/30326336 DC : 0 | BS EN 63010-1 - ELECTRIC CABLES - HALOGEN-FREE THERMOPLASTIC INSULATED AND SHEATHED FLEXIBLE CABLES OF RATED VOLTAGES UP TO AND INCLUDING 300/300 V - PART 1: GENERAL REQUIREMENTS |
08/30180703 DC : DRAFT APR 2008 | BS EN 60754-1 - TEST ON GASES EVOLVED DURING COMBUSTION OF MATERIALS FROM CABLES - PART 1: DETERMINATION OF THE HALOGEN ACID GAS CONTENT |
17/30348256 DC : 0 | BS EN 13501-6 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES |
18/30369843 DC : DRAFT APR 2018 | BS ISO 11907-1 - PLASTICS - SMOKE GENERATION - DETERMINATION OF THE CORROSIVITY OF FIRE EFFLUENTS - PART 1: GENERAL REQUIREMENTS AND APPLICABILITY |
MIL-PRF-24758 Revision A:2004 | CONDUIT SYSTEMS, FLEXIBLE, WEATHERPROOF |
BS EN 50411-3-1:2012 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Fibre management system, splice wall box, for category C & G |
I.S. EN 60695-5-1:2003 | FIRE HAZARD TESTING - PART 5-1: CORROSION DAMAGE EFFECTS OF FIRE EFFLUENT - GENERAL GUIDANCE |
08/30176905 DC : DRAFT JAN 2008 | BS EN 60684-2 - FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
TS 102 874-6 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); EXTERNAL COMMON POWER SUPPLY FOR CUSTOMER PREMISES NETWORK AND ACCESS EQUIPMENT; PART 6: CPS TYPE 2.D IMPLEMENTATION DETAILS |
CEI EN 50290-2-27 : 2008 | COMMUNICATION CABLES - PART 2-27: COMMON DESIGN RULES AND CONSTRUCTION - HALOGEN FREE FLAME RETARDANT THERMOPLASTIC SHEATHING COMPOUNDS |
I.S. EN 50290-2-36:2016 | COMMUNICATION CABLES - PART 2-36: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED SILICONE RUBBER INSULATION COMPOUND |
NF EN 187103 : 2003 | FAMILY SPECIFICATION - OPTICAL FIBRE CABLES FOR INDOOR APPLICATIONS |
UNE-IEC 60092-353:2017 | Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV |
BS EN 60684-2:2011 | Flexible insulating sleeving Methods of test |
BS EN 62329-2:2006 | Heat shrinkable moulded shapes Methods of test |
UNE-IEC 60092-350:2015 | Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications |
IEC 60092-352:2005 | Electrical installations in ships - Part 352: Choice and installation of electrical cables |
UNE-EN 50290-2-36:2016 | Communication cables - Part 2-36: Common design rules and construction - Crosslinked Silicone rubber insulation compound |
I.S. EN 61158-2:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION |
I.S. EN 50290-2-38:2016 | COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION FOR COAXIAL CABLES |
BS EN 60702-1 : 2002 | MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 1: CABLES |
PREN 13501-6 : DRAFT 2017 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES |
NF EN 50290-2-27 : 2002 AMD 1 2008 | COMMUNICATION CABLES - PART 2-27: COMMON DESIGN RULES AND CONSTRUCTION - HALOGEN FREE FLAME RETARDANT THERMOPLASTIC SHEATHING COMPOUNDS |
IEC TS 60695-7-50:2002 | Fire hazard testing - Part 7-50: Toxicity of fire effluent - Estimation of toxic potency - Apparatus and test method |
IEC 60092-351:2004 | Electrical installations in ships - Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables |
IEC 61892-3:2012 | Mobile and fixed offshore units - Electrical installations - Part 3: Equipment |
IEEE 45.8-2016 | IEEE Recommended Practice for Electrical Installations on Shipboard--Cable Systems |
IEC 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
IEC 62329-2:2006 | Heat-shrinkable moulded shapes - Part 2: Methods of test |
IEC 60695-5-1:2002 | Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance |
IEC 60092-353:2016 RLV | Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV |
EN 50290-2-33:2016 | Communication cables - Part 2-33: Common design rules and construction - Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable) |
EN 45510-2-9:2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
CEI EN 62329-2 : 2007 | HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST |
I.S. EN 60684-2:2011 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011) |
08/30191891 DC : DRAFT OCT 2008 | BS EN 61936-1 - POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
00/201245 DC : DRAFT FEB 2000 | IEC 62029-1 - COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS - PART 1: GENERIC SPECIFICATION AND TEST METHODS |
CEI EN 61386-1 : 2009 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 1: GENERAL REQUIREMENTS |
PD ISO/TS 19700:2016 | Controlled equivalence ratio method for the determination of hazardous components of fire effluents. Steady-state tube furnace |
14/30313775 DC : 0 | BS EN 62893-3 - CHARGING CABLES FOR ELECTRIC VEHICLES - PART 3: CABLES FOR AC CHARGING ACCORDING TO MODES 1, 2 AND 3 OF IEC 61851-1 |
BS EN 60695-7-2:2011 | Fire hazard testing Toxicity of fire effluent. Summary and relevance of test methods |
CSA ISO/IEC 14543-3-6 : 2007 : R2012 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-6: MEDIA AND MEDIA DEPENDENT LAYERS - TWISTED PAIR FOR NETWORK BASED CONTROL OF HES CLASS 1 |
NF EN 50290-2-26 : 2002 AMD 1 2008 | COMMUNICATION CABLES - PART 2-26: COMMON DESIGN RULES AND CONSTRUCTION - HALOGEN FREE FLAME RETARDANT INSULATION COMPOUNDS |
I.S. EN 187103:2003 | FAMILY SPECIFICATION - OPTICAL FIBRE CABLES FOR INDOOR APPLICATIONS |
IEC TR 60092-370:2009 | Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables |
I.S. EN 62321-3-2:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 3-2: SCREENING - TOTAL BROMINE IN POLYMERS AND ELECTRONICS BY COMBUSTION - ION CHROMATOGRAPHY |
UNE-IEC 60092-376:2017 | Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V) |
BS EN 50151:2003 | Railway applications. Fixed installations. Electric traction. Special requirements for composite insulators |
ISO/TS 19700:2016 | Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace |
CEI EN 50411-3-1 : 2013 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: FIBRE MANAGEMENT SYSTEM, SPLICE WALL BOX, FOR CATEGORY C & G |
CEI EN 50090-5-2 : 2005 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 5-2: MEDIA AND MEDIA DEPENDENT LAYERS - NETWORK BASED ON HBES CLASS 1, TWISTED PAIR |
I.S. EN 61936-1:2010 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
IEC TS 60695-5-2:2002 | Fire hazard testing - Part 5-2: Corrosion damage effects of fire effluent - Summary and relevance of test methods |
DIN EN 61158-2:2015-02 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION (IEC 61158-2:2014) |
IEC 61386-1:2008+AMD1:2017 CSV | Conduit systems for cable management - Part 1: General requirements |
BS EN 61158-2:2014 | Industrial communication networks. Fieldbus specifications Physical layer specification and service definition |
09/30193524 DC : 0 | BS EN 62222 - FIRE PERFORMANCE OF COMMUNICATION CABLES INSTALLED IN BUILDINGS - METHODS OF FIRE RETARDANCY |
IEC 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
IEC 60702-1:2002+AMD1:2015 CSV | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables |
IEC TR 62222:2012 | Fire performance of communication cables installed in buildings |
BS EN 61936-1 : 2010 | POWER INSTALLATIONS EXCEEDING 1 KV A.C - PART 1: COMMON RULES |
UNE-EN 61936-1:2012 | Power installations exceeding 1 kV a.c. -- Part 1: Common rules |
UNE-EN 60695-7-2:2012 | Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods |
UNE-IEC 61892-4:2016 | Mobile and fixed offshore units - Electrical installations - Part 4: Cables |
EN 45510-2-9 : 2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
EN 50411-3-1:2012 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-1: Fibre management system, splice wall box, for category C & G |
BS EN 187103:2003 | Harmonized system of quality assessment for electronic components. Family specification. Optical fibre cables for indoor applications |
BIS IS/IEC 60794-1-1 : 2001 | OPTICAL FIBRE CABLES - PART 1: GENERIC SPECIFICATION - SECTION 1: GENERAL |
CEI EN 187103 : 2003 | FAMILY SPECIFICATION - OPTICAL FIBRE CABLES FOR INDOOR APPLICATIONS |
BS EN 50551-2:2013 | Simplex and duplex cables to be used for cords Detailed specification and minimum requirements for a 3,0 mm simplex ruggedised single mode fibre cable to be used for patchcords/cords category U |
CEI EN 60684-2 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
CEI EN 60695-5-1 : 2003 | FIRE HAZARD TESTING - PART 5-1: CORROSION DAMAGE EFFECTS OF FIRE EFFLUENT - GENERAL GUIDANCE |
UNE-EN 50575:2015 | Power, control and communication cables - Cables for general applications in construction works subject to reaction to fire requirements |
IEC 60754-3:2018 | Test on gases evolved during combustion of materials from cables - Part 3: Measurement of low level of halogen content by ion chromatography |
BS IEC 61892-3:2012 | Mobile and fixed offshore units. Electrical installations Equipment |
BS EN 60695-5-1:2003 | Fire hazard testing. Assessment of potential corrosion damage by fire effluent General guidance |
PD IEC TR 60695-7-2:2002 | Fire hazard testing. Toxicity of fire effluent Summary and relevance of test methods |
CSA ISO/IEC 14543-3-6 : 2007 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-6: MEDIA AND MEDIA DEPENDENT LAYERS - TWISTED PAIR FOR NETWORK BASED CONTROL OF HES CLASS 1 |
CAN/CSA-ISO/IEC 14543-3-6-07 (R2017) | Information Technology - Home Electronic System (HES) Architecture - Part 3-6: Media and Media Dependent Layers - Twisted Pair for Network Based Control of HES Class 1 (Adopted ISO/IEC 14543-3-6:2007, first edition, 2007-01) |
UNI CEI EN 45510-2-8 : 2011 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-8: ELECTRICAL EQUIPMENT - POWER CABLES |
I.S. EN 50411-3-1:2012 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: FIBRE MANAGEMENT SYSTEM, SPLICE WALL BOX, FOR CATEGORY C & G |
UNE-IEC 60092-354:2015 | Electrical installations in ships - Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U<sub>m</sub> = 7,2 kV) up to 30 kV (U<sub>m</sub> = 36 kV) |
I.S. EN 50290-2-27:2002 | COMMUNICATION CABLES - PART 2-27: COMMON DESIGN RULES AND CONSTRUCTION - HALOGEN FREE FLAME RETARDANT THERMOPLASTIC SHEATHING COMPOUNDS |
IEC 61196-1:2005 | Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements |
UNE-IEC 60092-352:2015 | Electrical installations in ships - Part 352: Choice and installation of electrical cables |
TS 105 175-1 : 2.0.0 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); PLASTIC OPTICAL FIBRE SYSTEM SPECIFICATIONS FOR 100 MBIT/S AND 1 GBIT/S |
CEI EN 50290-2-26 : 2008 | COMMUNICATION CABLES - PART 2-26: COMMON DESIGN RULES AND CONSTRUCTION - HALOGEN FREE FLAME RETARDANT INSULATION COMPOUNDS |
IEC 60502-1:2004+AMD1:2009 CSV | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV(<em>U</em><sub>m</sub> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV) |
IEC 60092-376:2017 | Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V) |
IEC 61156-1:2007+AMD1:2009 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification |
BS EN 45510-2-9:2008 | Guide for procurement of power station equipment Electrical equipment. Cabling systems |
EN 50290-2-36:2016 | Communication cables - Part 2-36: Common design rules and construction - Crosslinked Silicone rubber insulation compound |
EN 62321-3-2:2014 | Determination of certain substances in electrotechnical products - Part 3-2: Screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography |
EN 62329-2:2006 | Heat shrinkable moulded shapes - Part 2: Methods of test |
EN 50551-2:2013 | Simplex and duplex cables to be used for cords - Part 2: Detailed specification and minimum requirements for a 3,0 mm simplex ruggedised single mode fibre cable to be used for patchcords/cords category U |
EN 61386-1:2008 | Conduit systems for cable management - Part 1: General requirements |
EN 50290-2-38:2016 | Communication cables - Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables |
CEI 18-58 : 2013 | MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT |
CEI EN IEC 60695-5-1:2023 | Fire hazard testing Part 5-1: Corrosion damage effects of fire effluent - General guidance |
IEC 60695-5-1:2002 | Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance |
AS/NZS IEC 60092.376:2020 | Electrical installations in ships Cables for control and instrumentation circuits 150/250 V (300 V) |
ISO 1042:1998 | Laboratory glassware — One-mark volumetric flasks |
IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
AS/NZS IEC 60092.360:2020 | Electrical installations in ships Insulating and sheathing materials for shipboard and offshore units, power, control, instrumentation and telecommunication cables |
AS/NZS 60092.354:2020 | Electrical installations in ships Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) (IEC 60092-354:2014 (ED.3.0) MOD) |
AS/NZS IEC 60092.353:2020 | Electrical installations in ships Power cables for rated voltages 1 kV and 3 kV |
ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.