IEC 60936-1:1999+AMD1:2002 CSV

FOREWORD
1 Scope
2 Normative references
3 Performance requirements
   3.1 (A4/1) Introduction
   3.2 (A4/2) General
   3.3 (A4/3.1) Range performance
   3.4 (A4/3.2) Minimum range
   3.5 (A4/3.3) Display
   3.6 (A4/3.4) Range measurement
   3.7 (A4/3.5) Heading indication (heading line)
   3.8 (A4/3.6) Bearing measurement
   3.9 (A4/3.7) Discrimination
   3.10 (A4/3.8) Roll or pitch
   3.11 (A4/3.9) Antenna scan
   3.12 (A4/3.10) Azimuth stabilisation
   3.13 (A4/3.11) Performance monitoring
   3.14 (A4/3.12) Anti-clutter devices
   3.15 (A4/3.13) Operation
   3.16 (A4/3.14) Operation with radar beacons and SARTs
   3.17 (A4/3.15) Display modes
   3.18 (A4/3.16) Interference from magnetic fields
   3.19 (A4/3.17) Radar installation
   3.20 (A4/3.18) Failure warnings (alarms) and status
        indications
   3.21 (A4/4) Multiple radar installations
   3.22 (A4/5) Interface
   3.23 (A4/6) Navigational information
   3.24 (A4/7) Plotting
   3.25 Standard names - abbreviations and symbols
   3.26 (A4/8) Ergonomics
   3.27 Safety precautions
4 Methods of testing and required test results
   4.1 General conditions of measurement and definitions
   4.2 Power supply, cabling distances and technical
        information
   4.3 (3.3) Range performance
   4.4 (3.4) Minimum range
   4.5 (3.5) Display
   4.6 (3.6) Range measurement
   4.7 (3.7) Heading indicator (heading line)
   4.8 (3.8) Bearing measurement
   4.9 (3.9) Discrimination
   4.10 (3.10) Roll and pitch performance
   4.11 (3.11) Antenna scan
   4.12 (3.12) Azimuth stabilisation
   4.13 (3.13.1) Performance monitor check
   4.14 (3.14) Anti-clutter devices
   4.15 (3.15) Operation
   4.16 (3.16) Operation with radar beacons and SARTs
   4.17 (3.17) Display modes
   4.18 (3.18) Interference from external magnetic fields
   4.19 (3.19) Radar installation
   4.20 (3.20) Failure warnings (alarms) and status
        indications
   4.21 (3.21) Multiple radar installations
   4.22 (3.22) Interface
   4.23 (3.23) Navigational information
   4.24 (3.24) Plotting
   4.25 (3.25) Standard names - abbreviations and symbols
   4.26 (3.26) Ergonomics
   4.27 (3.27) Safety precautions
   4.28 (3) Spurious emissions
   4.29 (3.9.3) Antenna horizontal radiation pattern
Annex A (normative) Method for relating the radar
        cross-section (echoing area) of one radar target
        with another
Annex B (normative) Standard names, abbreviations and symbols
        for control functions on marine navigational radar
        equipment
Annex C (normative) Guidelines for the display of navigational
        information on radar by means of radar maps
Annex D (normative) Unwanted emissions of radar systems -
        Methods of measurement and required results
Annex E (informative) Performance checks during environmental
        testing
Figures
Tables

Specifies the minimum operational and performance requirements, methods of testing and required test results for conformance to performance standards not inferior to those required by the relevant IMO resolution. Is associated with IEC 60945.This consolidated version consists of the first edition (1999) and its amendment 1 (2002). Therefore, no need to order amendment inaddition to this publication.