• IEC 60966-1:1999

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  31-12-2021

    Language(s):  English - French

    Published date:  23-04-1999

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Definitions
    4 Design and manufacturing requirements
          4.1 Cable design and construction
          4.2 Connector design and construction
          4.3 Outline and interface dimensions
    5 Workmanship, marking and packaging
          5.1 Workmanship
          5.2 Marking
          5.3 End caps
          5.4 Packaging and labelling
    6 Quality assessment
    7 Test methods - General
          7.1 Standard atmospheric conditions for testing
          7.2 Visual inspection
          7.3 Dimensions inspection
    8 Electrical tests
          8.1 Reflection properties
          8.2 Uniformity of impedance
          8.3 Insertion loss
          8.4 Insertion loss stability
          8.5 Propagation time
          8.6 Stability of electrical length
          8.7 Phase difference
          8.8 Phase variation with temperature
          8.9 Screening effectiveness
          8.10 Voltage proof
          8.11 Insulation resistance
          8.12 Inner and outer conductor continuity
          8.13 Void
          8.14 Power rating
          8.15 Intermodulation level measurement
    9 Mechanical robustness tests
          9.1 Tensile
          9.2 Flexure
          9.3 Flexing endurance
          9.4 Cable assembly crushing
          9.5 Torque
          9.6 Multiple bending
          9.7 Abrasion test of cable assembly
          9.8 Vibrations, shocks and impact
          9.9 Mechanical endurance
    10 Environmental tests
          10.1 Recommended severities
          10.2 Vibration, bumps and shock
          10.3 Climatic sequence
          10.4 Damp heat, steady state
          10.5 Rapid change of temperature
          10.6 Solvents and contaminating fluids
          10.7 Water immersion
          10.8 Salt mist and sulphur dioxide tests
          10.9 Dust tests
          10.10 Flammability
    11 Specialized test methods
    12 Test schedules
    Annex A (normative) Test methods for insertion loss determination
          A.1 Purpose
          A.2 Test methods
                 A.2.1 Test method 1
                 A.2.2 Test method 2
                 A.2.3 Test method 3
          A.3 Correction for characteristic impedance differences
    Annex B (informative) Measuring methods for propagation time
          B.1 Resonance method for propagation time measurement
          B.2 Time domaine method for propagation time measurement
    Annex C (informative) Measurement method for screening effectiveness
          C.1 Introduction
          C.2 Test method
    Annex D (informative) Recommended severities for environmental tests
          D.1 Introduction to the relationship between environmental
                 conditions and test severities
                 D.1.1 General
                 D.1.2 Environmental conditions
                 D.1.3 Environmental testing
          D.2 Severities for environmental testing
                 D.2.1 Vibration
                 D.2.2 Bump
                 D.2.3 Shock
                 D.2.4 Climatic sequence
                 D.2.5 Damp heat, steady state
                 D.2.6 Rapid change of temperature
                 D.2.7 Salt mist
                 D.2.8 Sulphur dioxide test
                 D.2.9 Dust test
    Annex E (normative) Quality assessment
          E.1 Object
          E.2 General
                 E.2.1 Related documents
                 E.2.2 Standards and preferred values
                 E.2.3 Marking of the cable assembly and packaging
                 E.2.4 Terminology
          E.3 Quality assessment procedures
                 E.3.1 Procedures for qualification approval
                 E.3.2 Procedures for capability approval
                 E.3.3 Quality conformance inspection
          E.4 Capability manual and approval
                 E.4.1 Responsibilities
                 E.4.2 Contents of the capability manual
                 E.4.3 Criteria for capability limits
    Table D.1 - Relationship between displacement and acceleration
    Table D.2 - Relationship between peak acceleration and velocity change
    Table E.1 - Example of capability limits for cable assemblies
    Table E.2 - Example of capability limits for flexible cables
    Table E.3 - Example of capability limits for connectors
    Table E.4 - Example of flow chart
    Figure 1 - Bending test: U shape assembly
    Figure 2 - Bending test: straight assembly
    Figure 3 - Twisting test: U shape assembly
    Figure 4 - Fixture for cable assembly flexure test
    Figure 5 - Apparatus for cable assembly flexing endurance test
    Figure 6 - Fixture for cable crushing test
    Figure 7 - Multiple bending test
    Figure 8 - Dust measuring device
    Figure A.1 - Circuit for the determination of insertion loss
    Figure A.2 - Circuit for the determination of insertion loss
    Figure A.3 - Alternative circuit for the determination of insertion loss
    Figure A.4 - Double-pass circuit for the determination of insertion loss
    Figure B.1 - Arrangement of test equipment
    Figure C.1 - Line injection test circuit for coaxial cable assemblies
    Figure C.2 - Schematic transfer functions of a coaxial cable assembly
    Figure C.3 - Complete installation for practical screening effectiveness
                 measurements
    Figure D.1 - Description of action needed for the preparation of the
                 environmental test specification

    Abstract - (Show below) - (Hide below)

    Establishes uniform requirements for testing the electrical, mechanical and climatic properties of r.f. and coaxial cable assemblies composed of cables and connectors operating in the transverse electromagnetic mode (TEM). Tests are described in IEC 61196-1 and IEC 61169-1 respectively.

    General Product Information - (Show below) - (Hide below)

    Committee TC 46
    Development Note Also numbered as BS EN 60966-1 (05/2005) Stability Date: 2018. (10/2012)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 60966-2-1:2009 (published 2009-09) Radio frequency and coaxial cable assemblies Sectional specification for flexible coaxial cable assemblies
    BS EN 50529-2 : 2010 EMC NETWORK STANDARD - PART 2: WIRE-LINE TELECOMMUNICATIONS NETWORKS USING COAXIAL CABLES
    CEI EN 50083-2 : 2012 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
    CEI EN 50529-2 : 2013 EMC NETWORK STANDARD - PART 2: WIRE-LINE TELECOMMUNICATIONS NETWORKS USING COAXIAL CABLES
    02/208645 DC : DRAFT AUG 2002 IEC 60966-3 ED.2 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION FOR SEMI-FLEXIBLE COAXIAL CABLE ASSEMBLIES
    BS EN 60966-2-7 : 2016 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-7: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3 000 MHZ, IEC 61169-47 CONNECTORS
    BS EN 60966-2-5:2017 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-5: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 1000 MHZ, IEC 61169-2 CONNECTORS
    I.S. EN 60966-2-4:2016 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-4: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-2 CONNECTORS
    CEI EN 60728-4 : 2008 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS
    NF EN 60966-2-7 : 2016 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-7: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-47 CONNECTORS
    07/30152672 DC : 0 BS EN 60966-2-5 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-5: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 TO 1000 MHZ, IEC 61169-2 CONNECTORS
    I.S. EN 60966-2-7:2016 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-7: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-47 CONNECTORS
    BS EN 60966-2-6:2017 (published 2017-02) Radio frequency and coaxial cable assemblies Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors
    07/30152678 DC : 0 BS EN 60966-2-6 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-6: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 TO 3000 MHZ, IEC 61169-24 CONNECTORS
    I.S. EN 60966-4:2003 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION FOR SEMI-RIGID COAXIAL CABLE ASSEMBLIES
    CEI EN 60966-2-1 : 2010 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-1: SECTIONAL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES
    13/30292670 DC : 0 BS EN 60966-2-5 - DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61196-2 CONNECTORS
    BS EN 60966-2-3:2009 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-3: DETAIL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES - FREQUENCY RANGE 0 MHZ TO 1000 MHZ, IEC 61169-8 CONNECTORS
    I.S. EN 60966-2-6:2017 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-6: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-24 CONNECTORS
    BS EN 60966-3:2009 (published 2009-05) Radio frequency and coaxial cable assemblies Sectional specification for semi-flexible coaxial cable assemblies
    13/30292666 DC : 0 BS EN 60966-2-4 - DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61196-2 CONNECTORS
    BS EN 60728-4 : 2008 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS
    08/30176193 DC : DRAFT JAN 2008 BS EN 60966-3 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION FOR SEMI FLEXIBLE COAXIAL CABLE ASSEMBLIES
    NBR 16264 : 2016 STRUCTURED CABLING FOR RESIDENTIAL APPLICATIONS
    96/210905 DC : DRAFT AUG 1996 46A/267/CDV - TECHNICAL REPORT - TYPE 3: INTRODUCTION TO EMC SCREENING MEASUREMENTS OF CABLES, CABLE ASSEMBLIES AND CONNECTORS
    13/30292675 DC : 0 BS EN 60966-2-6 - DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61196-24 CONNECTORS
    12/30263095 DC : 0 BS EN 60966-2-7 ED.1 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-7: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-47 CONNECTORS
    02/208648 DC : DRAFT AUG 2002 IEC 60966-4 ED.2 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION FOR SEMI-RIGID COAXIAL CABLE ASSEMBLIES
    16/30325971 DC : 0 BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS
    06/30160408 DC : 0 BS EN 60966-2-4 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-4: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 TO 3000 MHZ, IEC 61169-2 CONNECTORS
    BS EN 60966-4:2003 Radio frequency and coaxial cable assemblies Sectional specification for semi-rigid coaxial cable assemblies
    02/208613 DC : DRAFT AUG 2002 IEC 60966-2-1 ED.2 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-1: SECTIONAL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES
    CEI EN 60966-2-5 : 2010 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-5: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 1000 MHZ, IEC 61169-2 CONNECTORS
    BIS IS 14686-4 : 2012 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION FOR SEMI-RIGID COAXIAL CABLE ASSEMBLIES
    BS EN 60966-2-4:2009 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-4: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-2 CONNECTORS
    I.S. EN 60966-2-1:2009 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-1: SECTIONAL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES
    CEI EN 60966-2-6 : 2010 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-6: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-24 CONNECTORS
    NF EN 60966-2-3 : 2015 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-3: DETAIL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES - FREQUENCY RANGE 0 MHZ TO 1000 MHZ, IEC 61169-8 CONNECTORS
    NF EN 60966-2-1 : 2015 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-1: SECTIONAL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES
    CSA ISO/IEC 15018 : 2005 : R2010 INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
    CSA ISO/IEC 15018:2005 INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
    CSA ISO/IEC 15018 : 2005 : INC : AMD 1 : 2010 : R201000 INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
    CSA ISO/IEC 15018 : 2005 : INC : AMD 1 : 2010 : R2015 INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
    CEI EN 60966-2-3 : 2010 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-3: DETAIL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES - FREQUENCY RANGE 0 MHZ TO 1000 MHZ, IEC 61169-8 CONNECTORS
    CEI EN 60966-3 : 2010 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION FOR SEMI-FLEXIBLE COAXIAL CABLE ASSEMBLIES
    NF EN 60966-2-5 : 2017 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-5: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 1000 MHZ, IEC 61169-2 CONNECTORS
    I.S. EN 60966-2-3:2009 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-3: DETAIL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES - FREQUENCY RANGE 0 MHZ TO 1000 MHZ, IEC 61169-8 CONNECTORS
    I.S. EN 60966-3:2003 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION FOR SEMI-FLEXIBLE COAXIAL CABLE ASSEMBLIES
    NF EN 60966-2-6 : 2017 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-6: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-24 CONNECTORS
    I.S. EN 60728-4:2008 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS
    CEI EN 60966-2-4 : 2010 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-4: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-2 CONNECTORS
    I.S. EN 50529-2:2010 EMC NETWORK STANDARD - PART 2: WIRE-LINE TELECOMMUNICATIONS NETWORKS USING COAXIAL CABLES
    BS EN 50083-2 : 2012 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
    CEI EN 60966-4 : 2005 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION FOR SEMI-RIGID COAXIAL CABLE ASSEMBLIES
    ISO/IEC 15018:2004 Information technology Generic cabling for homes
    IEC 60966-4:2003 Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies
    I.S. EN 50083-2:2012 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
    I.S. EN 60966-2-5:2017 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-5: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 1000 MHZ, IEC 61169-2 CONNECTORS
    IEC 60728-2:2018 Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
    IEEE 45.8:2016 ELECTRICAL INSTALLATIONS ON SHIPBOARD - CABLE SYSTEMS
    IEC 60966-2-1:2008 Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies
    UNE-EN 50083-2:2013 Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
    IEC 60966-2-3:2009 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-3: DETAIL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES - FREQUENCY RANGE 0 MHZ TO 1000 MHZ, IEC 61169-8 CONNECTORS
    IEC 60728-4:2007 Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks
    IEC 60966-2-7:2015 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-7: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-47 CONNECTORS
    IEC 60966-2-6:2016 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-6: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-24 CONNECTORS
    IEC 60966-2-5:2016 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-5: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 1000 MHZ, IEC 61169-2 CONNECTORS
    IEC 60966-3:2008 Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies
    IEC 60966-2-4:2016 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-4: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-2 CONNECTORS
    EN 60728-4 : 2008 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS
    EN 60966-3 : 2009 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION FOR SEMI-FLEXIBLE COAXIAL CABLE ASSEMBLIES
    EN 60966-2-5 : 2017 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-5: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 1000 MHZ, IEC 61169-2 CONNECTORS (IEC 60966-2-5:2016)
    EN 60966-2-4 : 2016 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-4: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-2 CONNECTORS (IEC 60966-2-4:2016)
    EN 60966-4 : 2003 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION FOR SEMI-RIGID COAXIAL CABLE ASSEMBLIES
    EN 50083-2:2012/A1:2015 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
    EN 60966-2-1 : 2009 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-1: SECTIONAL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES
    EN 60966-2-6 : 2017 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-6: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-24 CONNECTORS (IEC 60966-2-6:2016)
    EN 60966-2-3 : 2009 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-3: DETAIL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES - FREQUENCY RANGE 0 MHZ TO 1000 MHZ, IEC 61169-8 CONNECTORS
    EN 50529-2 : 2010 EMC NETWORK STANDARD - PART 2: WIRE-LINE TELECOMMUNICATIONS NETWORKS USING COAXIAL CABLES
    EN 60966-2-7 : 2016 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-7: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-47 CONNECTORS (IEC 60966-2-7:2015)

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60068-2-68:1994 Environmental testing - Part 2-68: Tests - Test L: Dust and sand
    IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
    IEC 60068-2-11:1981 ENVIRONMENTAL TESTING - TEST KA: SALT MIST
    IEC 60339-1:1971 GENERAL PURPOSE RIGID COAXIAL TRANSMISSION LINES AND THEIR ASSOCIATED FLANGE CONNECTORS - GENERAL REQUIREMENTS AND MEASURING METHODS
    IEC 61169-1:2013 Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods
    IEC 60068-2-3:1969 ENVIRONMENTAL TESTING - TEST CA: DAMP HEAT, STEADY STATE
    ISO 9001:2015 Quality management systems Requirements
    IEC 60068-2-42:2003 ENVIRONMENTAL TESTING - PART 2-42: TESTS - TEST KC: SULPHUR DIOXIDE TEST FOR CONTACTS AND CONNECTIONS
    ISO 9000:2015 Quality management systems Fundamentals and vocabulary
    IEC 60068-2-29:1987 BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST EB AND GUIDANCE: BUMP
    IEC 61196-1:2005 Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements
    IEC 60512-5:1992 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS - IMPACT TESTS (FREE COMPONENTS), STATIC LOAD TESTS (FIXED COMPONENTS) ENDURANCE TESTS AND OVERLOAD TESTS
    IEC 60339-2:1996 General purpose rigid coaxial transmission lines and their associated flange connectors - Part 2: Detail specifications
    IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
    IEC 61726:2015 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective