• IEC 61000-2-9:1996

    Current The latest, up-to-date edition.

    ELECTROMAGNETIC COMPATIBILITY (EMC) - ENVIRONMENT - DESCRIPTION OF HEMP ENVIRONMENT - RADIATED DISTURBANCE - BASIC EMC PUBLICATION

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French

    Published date:  19-02-1996

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1. Scope and object
    2. Normative reference
    3. General
    Definitions
    5. Description of HEMP environment, radiated
        parameters
        5.1 High-altitude bursts
        5.2 Spatial extent of HEMP on the earth's surface
        5.3 HEMP time dependence
        5.4 Magnetic field component
        5.5 HEMP amplitude and energy fluence spectrum
        5.6 Weighting of the early, intermediate and late-time
             HEMP
        5.7 Reflection and transmission

    Abstract - (Show below) - (Hide below)

    Gives the high-altitude electromagnetic pulse (HEMP) environment that is one of the consequences of a high-altitude nuclear explosion. Two cases are considered: a) high-altitude nuclear explosions; b) low-altitude nuclear explosions. The most important case is the high-altitude nuclear explosion. The other effects of the nuclear explosion: ground shock, thermal and nuclear ionizing radiation, blast, in this case are not present at ground level. The aim of this is to establish a common reference for the HEMP environment so as to select realistic stresses applicable to victim equipment to evaluate their performance.

    General Product Information - (Show below) - (Hide below)

    Committee SC 77C
    Development Note Also numbered as BS EN 61000-2-9. (12/2005) Stability Date: 2018. (11/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    07/30168004 DC : 0 BS EN 61000-4-35 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-35: TESTING AND MEASUREMENT TECHNIQUES - HIGH POWER ELECTROMAGNETIC (HPEM) SIMULATOR COMPENDIUM
    MIL STD 464 : C ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS
    I.S. EN 61000-4-25:2002 ELECTROMAGNETIC COMPATIBILITY (EMC) - TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS (IEC 61000-4-25:2001 (EQV))
    96/216040 DC : DRAFT DEC 1996
    IEC TS 61000-5-8:2009 Electromagnetic compatibility (EMC) - Part 5-8: Installation and mitigation guidelines - HEMP protection methods for the distributed infrastructure
    01/204707 DC : DRAFT JUL 2001 IEC 61000-6-6 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-6: GENERIC STANDARDS - HEMP IMMUNITY FOR INDOOR EQUIPMENT
    95/210789 DC : DRAFT AUG 1995 IEC 61000-5-6 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5: MITIGATION METHODS AND INSTALLATION GUIDELINES - SECTION 6: MITIGATION OF EXTERNAL INFLUENCES - TECHNICAL REPORT TYPE 2
    02/204266 DC : DRAFT MAR 2002 IEC 61000-1-5 TR. ED.1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-5: GENERAL - HIGH POWER ELECTROMAGNETIC (HPEM) EFFECTS ON CIVIL SYSTEMS
    13/30285924 DC : 0 BS EN 61000-4-24 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-24: TESTING AND MEASUREMENT TECHNIQUES - TEST METHODS FOR PROTECTIVE DEVICES FOR HEMP CONDUCTED DISTURBANCE
    08/30181498 DC : DRAFT APR 2008 BS EN 61000-5-8 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5-8: INSTALLATION AND MITIGATION GUIDELINES - HEMP PROTECTION METHODS FOR THE DISTRIBUTED INFRASTRUCTURE
    BS EN 61000-4-25 : 2002 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-25: TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS
    PD IEC/TR 61000-4-35:2009 (published 2010-07) Electromagnetic compatibility (EMC) Testing and measurement techniques. HPEM simulator compendium
    02/204753 DC : DRAFT APR 2002 IEC 61000-2-13. ED. 1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-13: ENVIRONMENT - HIGH-POWER ELECTROMAGNETIC ENVIRONMENTS (HPEM) - RADIATED AND CONDUCTED
    DD IEC TS 61000-5-9 : 2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5-9: INSTALLATION AND MITIGATION GUIDELINES - SYSTEM-LEVEL SUSCEPTIBILITY ASSESSMENTS FOR HEMP AND HPEM
    CEI EN 61000-4-23 : 2002 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-23: TESTING AND MEASUREMENT TECHNIQUES - TEST METHODS FOR PROTECTIVE DEVICES FOR HEMP AND OTHER RADIATED DISTURBANCES
    DIN EN 61000-4-23 : 2001 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-23: TESTING AND MEASUREMENT TECHNIQUES - TEST METHODS FOR PROTECTIVE DEVICES FOR HEMP AND OTHER RADIATED DISTURBANCES
    BS EN 61000-4-23:2001 Electromagnetic compatibility (EMC). Testing and measurement techniques Test methods for protective devices for HEMP and other radiated disturbances
    BS IEC 61000-6-6 : 2003 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-6: GENERIC STANDARDS - HEMP IMMUNITY FOR INDOOR EQUIPMENT
    09/30214220 DC : 0 BS IEC TR 61000-2-5 ED - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-5: ENVIRONMENT - CLASSIFICATION OF ELECTROMAGNETIC ENVIRONMENTS
    PD IEC/TS 61000-5-10:2017 (published 2017-10) Electromagnetic compatibility (EMC) Installation and mitigation guidelines. Guidance on the protection of facilities against HEMP and IEMI
    BS EN 61000-4-20:2003 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES
    02/204265 DC : 0 IEC 61000-4-33. ED.1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-33: TESTING AND MEASUREMENT TECHNIQUES - METHODS AND MEANS OF MEASUREMENTS OF HIGH POWER TRANSIENT PARAMETERS
    13/30286075 DC : 0 BS EN 61000-4-36 ED 1.0 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-36: TESTING AND MEASUREMENT TECHNIQUES - IEMI IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS
    BS EN 61000-2-10 : 1999 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-10: DESCRIPTION OF HEMP ENVIRONMENT - CONDUCTED DISTURBANCE
    PD IEC/TR 61000-1-5:2004 (published 2005-03) Electromagnetic compatibility (EMC) General - High power electromagnetic (HPEM) effects on civil systems
    IEC 61000-4-33:2005 Electromagnetic compatibility (EMC) - Part 4-33: Testing and measurement techniques - Measurement methods for high-power transient parameters
    IEC TR 61000-2-5 REDLINE : 3ED 2017 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-5: ENVIRONMENT - DESCRIPTION AND CLASSIFICATION OF ELECTROMAGNETIC ENVIRONMENTS
    DD IEC TS 61000-5-8 : 2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5-8: INSTALLATION AND MITIGATION GUIDELINES - HEMP PROTECTION METHODS FOR THE DISTRIBUTED INFRASTRUCTURE
    PD IEC TR 61000-1-3:2002 (published 2002-08) Electromagnetic compatibility (EMC). General The effects of high-altitude EMP (HEMP) on civil equipment and systems
    IEC 61000-4-23:2016 Electromagnetic compatibility (EMC) - Part 4-23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances
    05/30136204 DC : DRAFT JUL 2005
    07/30167970 DC : 0 BS EN 61000-5-9 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5-9: INSTALLATION AND MITIGATION GUIDELINES - SYSTEM-LEVEL SUSCEPTIBILITY ASSESSMENTS FOR HEMP AND HPEM
    AEP-41 VOL 2 : 2004 ELECTROMAGNETIC (EM), ENVIRONMENTS (EMES), EM ENVIRONMENTAL EFFECTS (E[3]) AND OPERATIONAL CATEGORIES (OCS)
    CAN/CSA-IEC 61000-4-18:14 (R2018) Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (Adopted IEC 61000-4-18:2011, edition 1:2006 consolidated with amendment 1:2010) | Compatibilité électromagnétique (CEM) - Partie 4-18 : Techniques d\'essai et de mesure - Essai d\'immunité à l\'onde oscillatoire amortie (norme CEI 61000-4-18:2011 adoptée, édition 1:2006 consolidée par l\'amendement 1:2010)
    VDE 0847-4-23 : 2001 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-23: TESTING AND MEASUREMENT TECHNIQUES; TEST METHODS FOR PROTECTIVE DEVICES FOR HEMP AND OTHER RADIATED DISTURBANCES
    CEI EN 61000-2-10 : 1999 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-10: ENVIRONMENT - DESCRIPTION OF HEMP ENVIRONMENT - CONDUCTED DISTURBANCE
    IEC 61000-6-6:2003 Electromagnetic compatibility (EMC) - Part 6-6: Generic standards - HEMP immunity for indoor equipment
    I.S. EN 61000-4-18:2007 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-18: TESTING AND MEASUREMENT TECHNIQUES - DAMPED OSCILLATORY WAVE IMMUNITY TEST
    AECTP-250 : 2014 ELECTRICAL AND ELECTROMAGNETIC ENVIRONMENTAL CONDITIONS
    PD IEC/TR 61000-2-5:2017 (published 2017-02) Electromagnetic compatibility (EMC) Environment. Description and classification of electromagnetic environments
    IEC 61000-2-11:1999 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-11: ENVIRONMENT - CLASSIFICATION OF HEMP ENVIRONMENTS
    IEC TR 61000-1-3:2002 Electromagnetic compatibility (EMC) - Part 1-3: General - The effects of high-altitude EMP (HEMP) on civil equipment and systems
    BS EN 61000-4-18 : 2007 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-18: TESTING AND MEASUREMENT TECHNIQUES - DAMPED OSCILLATORY WAVE IMMUNITY TEST
    14/30316052 DC : 0 BS EN 61000-4-23 ED 2.0 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-23: TESTING AND MEASUREMENT TECHNIQUES - TEST METHODS FOR PROTECTIVE DEVICES FOR HEMP AND OTHER RADIATED DISTURBANCES
    IEC 61000-4-25:2001+AMD1:2012 CSV Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems
    I.S. EN 61000-4-20:2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES
    IEC TR 61000-2-5:2017 Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments
    IEC TR 61000-5-3:1999 Electromagnetic compatibility (EMC) - Part 5-3: Installation and mitigation guidelines - HEMP protection concepts
    IEC TR 61000-1-5:2004 Electromagnetic compatibility (EMC) - Part 1-5: General - High power electromagnetic (HPEM) effects on civil systems
    IEC TR 61000-4-35:2009 Electromagnetic compatibility (EMC) - Part 4-35: Testing and measurement techniques - HPEM simulator compendium
    IEC 61000-2-13:2005 Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted
    IEC TS 61000-5-9:2009 Electromagnetic compatibility (EMC) - Part 5-9: Installation and mitigation guidelines - System-level susceptibility assessments for HEMP and HPEM
    IEC 61000-4-24:2015 Electromagnetic compatibility (EMC) - Part 4-24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance
    IEC 61000-4-36:2014 Electromagnetic compatibility (EMC) - Part 4-36: Testing and measurement techniques - IEMI immunity test methods for equipment and systems
    IEC TR 61000-2-5:2017 RLV Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments
    IEC 61000-2-10:1998 Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance
    IEC 61000-4-18:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
    UNE-EN 61000-4-20:2011 Electromagnetic compatibility (EMC) -- Part 4-20: Testing and measurement techniques - Emission and immunity testing in Transverse Electromagnetic (TEM) waveguides - Basic EMC publication
    IEC TS 61000-5-10:2017 Electromagnetic compatibility (EMC) - Part 5-10: Installation and mitigation guidelines - Guidance on the protection of facilities against HEMP and IEMI
    EN 61000-4-25 : 2002 AMD 1 2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-25: TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS (IEC 61000-4-25:2001/A1:2012)
    IEC 61000-4-20:2010 Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides
    CEI EN 61000-4-20 : 2013 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES
    EN 61000-4-23 : 2000 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-23: TESTING AND MEASUREMENT TECHNIQUES - TEST METHODS FOR PROTECTIVE DEVICES FOR HEMP AND OTHER RADIATED DISTURBANCES
    EN 61000-4-20:2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES
    EN 61000-2-10 : 1999 Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance

    Standards Referencing This Book - (Show below) - (Hide below)

    SA TR IEC 61000.2.5:2019 Electromagnetic compatibility (EMC) Environment - Description and classification of electromagnetic environments
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective