BS EN 60870-2-1:1996
|
TELECONTROL EQUIPMENT AND SYSTEMS - OPERATING CONDITIONS - PART 2-1: POWER SUPPLY AND ELECTROMAGNETIC COMPATIBILITY |
PD IEC/TS 62700:2014
|
DC power supply for notebook computers |
UNE-EN 60730-1:2013
|
Automatic electrical controls for household and similar use - Part 1: General requirements |
IEC 60947-5-3:2013
|
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
CSA E60335.2.53 : 2005 : R2013
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-53: PARTICULAR REQUIREMENTS FOR SAUNA HEATING APPLIANCES |
IEC 60335-2-32:2002+AMD1:2008+AMD2:2013 CSV
|
Household and similar electrical appliances - Safety - Part 2-32:Particular requirements for massage appliances |
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV
|
Low-voltage switchgear and controlgear - Part 1: General rules |
CSA C22.2 No. 60745.2.6 : 2004 : INC : AMD 2 : 2009 : R2013
|
HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR HAMMERS |
CSA IEC/TS 61000-3-5 : 2012 : R2016
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-5: LIMITS - LIMITATION OF VOLTAGE FLUCTUATIONS AND FLICKER IN LOW-VOLTAGE POWER SUPPLY SYSTEMS FOR EQUIPMENT WITH RATED CURRENT GREATER THAN 75 A |
IEC 60601-1-2:2007
|
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests |
IEC 62080:2001+AMD1:2008+AMD2:2015 CSV
|
Sound signalling devices for household and similar purposes |
IEC 61800-3:2017
|
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods |
IEC 61204-3:2016 RLV
|
Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
IEC 60335-2-56:2002+AMD1:2008+AMD2:2014 CSV
|
Household and similar electrical appliances - Safety - Part 2-56:Particular requirements for projectors and similar appliances |
BS EN 60730-1:2011
|
Automatic electrical controls for household and similar use General requirements |
BS EN 60947-2:2017
|
Low-voltage switchgear and controlgear Circuit-breakers |
IEC 60335-2-92:2002
|
Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators |
UNE-EN 62080:2010
|
Sound signalling devices for household and similar purposes |
IEC 60335-2-77:2002
|
Household and similar electrical appliances - Safety - Part 2-77: Particular requirements for pedestrian controlled mains-operated lawnmowers |
BS EN 62920:2017
|
Photovoltaic power generating systems. EMC requirements and test methods for power conversion equipment |
BS EN 60204-31:2013
|
Safety of machinery. Electrical equipment of machines Particular safety and EMC requirements for sewing machines, units and systems |
BS EN 61000-6-3 : 2007 : INC : AMD 1 : 2011
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
IEC 61000-3-11:2017
|
Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection |
IEC 61058-1:2016
|
Switches for appliances - Part 1: General requirements |
IEC 60730-2-19:1997+AMD1:2000+AMD2:2007 CSV
|
Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements |
IEC 60335-2-50:2002+AMD1:2007+AMD2:2017 CSV
|
Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie |
UNE-EN 50121-5:2018
|
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
BS EN 61851-21-1:2017
|
Electric vehicle conductive charging system Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply |
CSA C22.2 No. 60745.2.6 : 2004
|
HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR HAMMERS |
CSA C22.2 No. 60745.2.1 : 2004 : INC : AMD 1 : 2010 : R2013
|
HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-1: PARTICULAR REQUIREMENTS FOR DRILLS AND IMPACT DRILLS |
VDI/VDE 2185-1 : 2007
|
RADIO BASED COMMUNICATION IN INDUSTRIAL AUTOMATION |
BIS IS/IEC 61058-1 : 2000(R2007)
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
BS EN 60335-2-71:2003
|
Household and similar electrical appliances. Safety Particular requirements for electrical heating appliances for breeding and rearing animals |
IEC 60519-1:2015
|
Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
BS ISO 16110-1:2007
|
HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY |
CSA E61558.1:2012
|
SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
IEC 63024:2017
|
Requirements for automatic reclosing devices (ARDs) for circuit breakers, RCBOs-RCCBs for household and similar uses |
BS EN 12098-4:2005
|
CONTROLS FOR HEATING SYSTEMS - PART 4: OPTIMUM START-STOP CONTROL EQUIPMENT FOR ELECTRICAL SYSTEMS |
BS EN 50293:2012
|
ROAD TRAFFIC SIGNAL SYSTEMS - ELECTROMAGNETIC COMPATIBILITY |
IEC 62282-3-100:2012
|
Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
IEC 60730-2-17:1997+AMD1:2000+AMD2:2007 CSV
|
Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements |
IEC 61058-2-4:1995+AMD1:2003 CSV
|
Switches for appliances - Part 2-4: Particular requirements for independently mounted switches |
IEC 61000-2-12:2003
|
Electromagnetic compatibility (EMC) - Part 2-12: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems |
IEC 60870-2-1:1995
|
Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility |
DD CLC/TS 50217:2005
|
GUIDE FOR IN SITU MEASUREMENTS - IN SITU MEASUREMENT OF DISTURBANCE EMISSION |
BS EN 61204-3:2001
|
Low voltage power supplies, d.c. output Electromagnetic compatibility (EMC) |
IEC 60335-2-98:2002+AMD1:2004+AMD2:2008 CSV
|
Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers |
IEC TR 61000-4-1:2016
|
Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
IEC 61851-21-1:2017
|
Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply |
IEC 62282-3-1:2007
|
Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety |
BS IEC 62003:2009
|
NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - REQUIREMENTS FOR ELECTROMAGNETIC COMPATIBILITY TESTING |
IEC TR 60725:2012
|
Consideration of reference impedances and public supply network impedances for use in determining the disturbance characteristics of electrical equipment having a rated current ≤75 A per phase |
IEC 61204-3:2016
|
Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
BS EN 62080 : 2009
|
SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES |
BS EN 12182:2012 (published 2012-06)
|
Assistive products for persons with disability. General requirements and test methods |
NF EN 62920 : 2017
|
PHOTOVOLTAIC POWER GENERATING SYSTEMS - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT |
CSA C22.2 No. 61058.1 : 2009 : INC : UPD 1 : 2013
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60335-1:2011
|
SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60745.2.21 :2005
|
HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-21: PARTICULAR REQUIREMENTS FOR DRAIN CLEANERS |
IEC 60335-2-88:2002
|
Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems |
BS ISO 17966:2016
|
Assistive products for personal hygiene that support users. Requirements and test methods |
IEC 60669-2-1:2002+AMD1:2008+AMD2:2015 CSV
|
Switches for household and similar fixed electrical installations -Part 2-1: Particular requirements - Electronic switches |
BS EN 61439-1:2011
|
Low-voltage switchgear and controlgear assemblies General rules |
UNE-EN 62282-3-1:2011
|
Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety |
PD IEC/TR 61000-3-7:2008
|
Electromagnetic compatability (EMC) Limits. Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems |
IEC 62003:2009
|
Nuclear power plants - Instrumentation and control important to safety - Requirements for electromagnetic compatibility testing |
CSA C22.2 No. 60745.2.11 : 2004
|
HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR RECIPROCATING SAWS |
IEC 61558-1:2017
|
Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
BS EN 50465:2015
|
European product standard for combined heating power systems using gas fuel |
IEC 60335-2-45:2002+AMD1:2008+AMD2:2011 CSV
|
Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances |
IEC 60745-2-4:2002+AMD1:2008 CSV
|
Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type |
IEC 60335-2-99:2003+AMD1:2017 CSV
|
Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods |
UNE-EN 60947-5-3:2014
|
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
BIS IS/IEC 60947-2 : 2003
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT BREAKERS |
BS EN 50121-4:2016
|
Railway applications. Electromagnetic compatibility Emission and immunity of the signalling and telecommunications apparatus |
IEC 60335-2-65:2002+AMD1:2008+AMD2:2015 CSV
|
Household and similar electrical appliances - Safety - Part 2-65:Particular requirements for air-cleaning appliances |
IEC 60335-2-73:2002+AMD1:2006+AMD2:2009 CSV
|
Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters |
IEC 62236-5:2018
|
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
IEC 60335-2-100:2002
|
Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums |
IEC TR 61000-3-7:2008
|
Electromagnetic compatibility (EMC) - Part 3-7: Limits - Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems |
IEC 60335-2-104:2003
|
Household and similar electrical appliances - Safety - Part 2-104: Particular requirements for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment |
IEC 60204-31:2013
|
Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems |
IEC 61851-21:2001
|
Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supply |
IEC 60335-2-47:2002+AMD1:2008+AMD2:2017 CSV
|
Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans |
DD IEC/TS 62091:2003
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLERS FOR DRIVERS OF STATIONARY FIRE PUMPS |
IEC 60745-1:2006
|
Hand-held motor-operated electric tools - Safety - Part 1: General requirements |
CSA C22.2 No. 61058.1 : 2009
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
IEC TR 61000-2-6:1995
|
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances |
IEC 60335-2-10:2002+AMD1:2008 CSV
|
Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines |
CSA C61000.2.2 : 2004
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-2: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS |
BS EN 61400-21:2008
|
Wind turbines Measurement and assessment of power quality characteristics of grid connected wind turbines |
IEC 60947-5-1:2016 RLV
|
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices |
NF EN 62135-2 : 2015
|
RESISTANCE WELDING EQUIPMENT - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
BS EN 14637:2007
|
Building hardware. Electrically controlled hold-open systems for fire/smoke door assemblies. Requirements, test methods, application and maintenance |
IEC 60335-2-84:2002+AMD1:2008+AMD2:2013 CSV
|
Household and similar electrical appliances - Safety - Part 2-84:Particular requirements for toilet appliances |
IEC 61000-4-1:2006
|
Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
IEC 61000-2-2:2002+AMD1:2017 CSV
|
Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems |
DIN EN ISO 10535:2007-04
|
Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006) |
CAN/CSA-C22.2 NO. 60335-1:11 (R2016)
|
Safety of household and similar appliances - Part 1: General requirements (Tri-national standard, with NMX-J-521/1-ANCE and UL 60335-1) |
VDE 0557-3 : 2001 COR 1 2004
|
LOW-VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: PRODUCT EMC STANDARD |
BS EN 13637:2015
|
Building hardware. Electrically controlled exit systems for use on escape routes. Requirements and test methods |
IEC 60947-2:2016 RLV
|
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
IEC 61000-4-15:2010
|
Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications |
AAMI TIR18:2010
|
GUIDANCE ON ELECTROMAGNETIC COMPATIBILITY OF MEDICAL DEVICES IN HEALTHCARE FACILITIES |
BS EN 15194:2017
|
Cycles. Electrically power assisted cycles. EPAC Bicycles |
EN ISO 10535:2006
|
Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006) |
IEC 60730-1:2013+AMD1:2015 CSV
|
Automatic electrical controls - Part 1: General requirements |
ISO/IEC 24700:2005
|
Quality and performance of office equipment that contains reused components |
BS EN 61326-1:2013
|
Electrical equipment for measurement, control and laboratory use. EMC requirements General requirements |
DIN EN 809:2012-10
|
Pumps and pump units for liquids - Common safety requirements |
IEC 60335-2-85:2002+AMD1:2008+AMD2:2017 CSV
|
Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers |
BS EN 50160 : 2010
|
VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS |
ISO 16110-1:2007
|
Hydrogen generators using fuel processing technologies Part 1: Safety |
IEC 62236-4:2018 RLV
|
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
DIN EN 13637:2015-12
|
BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
BS EN 61000-2-2 : 2002
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS |
IEC 62236-5:2018 RLV
|
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
BS EN 61558-1 : 2005
|
SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
CSA C61000.2.2 : 2004 : R2014
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-2: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS |
IEC 62282-5-1:2012
|
Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
UNE-EN 60204-31:2013
|
Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems |
IEC 60335-2-101:2002+AMD1:2008+AMD2:2014 CSV
|
Household and similar electrical appliances - Safety - Part 2-101:Particular requirements for vaporizers |
EN 60601-1-2:2015
|
MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS (IEC 60601-1-2:2014) |
IEC 60730-2-8:2000+AMD1:2002+AMD2:2015 CSV
|
Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated watervalves, including mechanical requirements |
UNE-EN 50121-4:2017
|
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
BS EN 50512:2009
|
ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS) |
BS EN 61000-6-3 : 2007
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
IEC 62236-4:2018
|
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
IEC 61000-4-15:2010 RLV
|
Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications |
IEC 60947-5-9:2006
|
Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches |
UNE-EN 50512:2011
|
Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS) |
BS EN 62282-3-100:2012
|
FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
PD IEC/TR 61000-4-38:2015 (published 2015-09)
|
Electromagnetic compatibility (EMC) Testing and measurement techniques. Test, verification and calibration protocol for voltage fluctuation and flicker compliance test systems |
BS EN ISO 10535:2006
|
HOISTS FOR THE TRANSFER OF DISABLED PERSONS - REQUIREMENTS AND TEST METHODS |
UNE-EN 62282-5-1:2013
|
Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
BS ISO 7176-21:2009 (published 2010-03)
|
Wheelchairs Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers |
BS EN 60947-5-3:2013
|
Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
BS EN 61000-4-1:2007
|
Electromagnetic compatibility (EMC) Testing and measurement techniques. Overview of IEC 61000-4 series |
BS EN 62282-5-1:2012 (published 2013-01)
|
Fuel cell technologies Portable fuel cell power systems. Safety |
BS EN 61000-3-11:2001
|
Electromagnetic compatibility (EMC). Limits Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated voltage current ≤ 75 A and subject to conditional connection |
BS EN 60146-1-1:2010
|
Semiconductor converters. General requirements and line commutated converters Specification of basic requirements |
CSA C22.2 No. 61058.1 : 2009 : R2014
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
BS EN 60335-2-10 : 2003
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
BS EN 60601-1-2:2015
|
Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard. Electromagnetic disturbances. Requirements and tests |
CSA C22.2 No. 60745.2.1:2004
|
HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-1: PARTICULAR REQUIREMENTS FOR DRILLS AND IMPACT DRILLS |
CSA IEC 61000-4-15 : 2012
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-15: TESTING AND MEASUREMENT TECHNIQUES - FLICKERMETER - FUNCTIONAL AND DESIGN SPECIFICATIONS |
BS EN 60974-10 : 2014
|
ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
DIN EN 14637:2008-01
|
Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance |
IEC TR 61000-3-15:2011
|
Electromagnetic compatibility (EMC) - Part 3-15: Limits - Assessment of low frequency electromagnetic immunity and emission requirements for dispersed generation systems in LV network |
BS EN 61326:1998
|
ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS |
IEC 60335-2-51:2002+AMD1:2008+AMD2:2011 CSV
|
Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations |
IEC 61058-1:2016 RLV
|
Switches for appliances - Part 1: General requirements |
IEC TS 62700:2014
|
DC power supply for notebook computers |
IEC 60947-5-2:2007+AMD1:2012 CSV
|
Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - Proximity switches |
BS EN 60745-1 : 2009
|
HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
UNE-EN 62041:2011
|
Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements |
IEC 60335-2-61:2002+AMD1:2005+AMD2:2008 CSV
|
Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal storage room heaters |
IEC TS 62091:2003
|
Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps |
BS EN 60947-5-1:2017 (published 2017-12)
|
Low-voltage switchgear and controlgear Control circuit devices and switching elements. Electromechanical control circuit devices |
CAN/CSA-C61000-2-2-04 (R2018)
|
Electromagnetic Compatibility (EMC) - Part 2-2: Environment - Compatibility Levels for Low-Frequency Conducted Disturbances and Signalling in Public Low-Voltage Power Supply Systems (Adopted CEI/IEC 61000-2-2:2002, second edition, 2002-03, with Canadian deviations) | Compatibilité électromagnétique (CEM) - Partie 2-2: Environnement - Niveaux de compatibilité pour les perturbations conduites à basse fréquence et la transmission des signaux sur les réseaux publics d\'alimentation basse tension (norme CEI/IEC 61000-2-2:2002 adoptée, deuxième édition, 2002-03, avec exigences propres au Canada) |
IEC 63044-5-1:2017
|
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up |
CAN/CSA-E60335-2-53-05 (R2018)
|
Household and Similar Electrical Appliances - Safety - Part 2-53: Particular Requirements for Sauna Heating Appliances (Adopted CEI/IEC 60335-2-53:2005, third edition, 2002-10) | Appareils électrodomestiques et analogues - Sécurité - Partie 2-53: Règles particulières pour les appareils de chauffage de saunas (norme CEI/IEC 60335-2-53:2005 adoptée, troisième édition, 2002-10) |
BS EN 60669-2-1 : 2004
|
SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES |
PD IEC/TR 61000-3-14:2011
|
Electromagnetic compatibility (EMC) Assessment of emission limits for harmonics, interharmonics, voltage fluctuations and unbalance for the connection of disturbing installations to LV power systems |
IEC 60947-2:2016
|
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
BS EN 60947-5-2 : 2007
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES |
IEC 60335-2-74:2002+AMD1:2006+AMD2:2009 CSV
|
Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters |
CAN/CSA-C22.2 NO. 60947-1-13 (R2018)
|
Low-voltage switchgear and controlgear - Part 1: General rules (Tri-national standard, with UL 60947-1 and NMX-J-515-ANCE) |
ISO/TS 19880-1:2016
|
Gaseous hydrogen Fuelling stations Part 1: General requirements |
IEC 60947-5-1:2016
|
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices |
CSA C22.2 NO. 60947-5-2:14 (R2019)
|
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches (Bi-national standard, with UL 60947-5-2) |
IEC 60745-2-21:2002+AMD1:2008 CSV
|
Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners |
UNE-EN 60947-5-2:2008
|
Low-voltage switchgear and controlgear -- Part 5-2: Control circuit devices and switching elements - Proximity switches. |
IEC 62135-2:2015
|
Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements |
CSA C22.2 No. 60745.2.11 : 2004 : INC : AMD 1 : 2009 : R2013
|
HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR RECIPROCATING SAWS |
CAN/CSA-E61558-1:12 (R2017)
|
Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests (Adopted IEC 61558- 1:1997 + A1:1998, edition 2.1, 2009-04 with Canadian deviations) | Sécurité des transformateurs, alimentations, bobines d\'inductance et produits analogues - Partie 1: Exigences générales et essais (norme CEI 61558-1:1997 + A1:1998 adoptée, édition 2.1, 2009-04 avec exigences propres au Canada) |
BS EN 60947-1 : 2007
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
IEC TR 61000-1-4:2005
|
Electromagnetic compatibility (EMC) - Part 1-4: General - Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz |
IEC 61727:2004
|
Photovoltaic (PV) systems - Characteristics of the utility interface |
IEC 60335-2-76:2002+AMD1:2006+AMD2:2013 CSV
|
Household and similar electrical appliances - Safety - Part 2-76:Particular requirements for electric fence energizers |
BS EN 60947-5-9:2007
|
LOW-VOLTAGE SWITCHGEAR AND CONTROL GEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES |
BS EN 50240:2004
|
|
BS EN 60335-2-99:2003
|
Specification for safety of household and similar electrical appliances Particular requirements for commercial electric hoods |
NF EN 60974-10 : 2014 AMD 1 2015
|
ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
IEC 60669-2-5:2013
|
Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES) |
IEC 60335-2-12:2002+AMD1:2008+AMD2:2017 CSV
|
Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances |
PD IEC/TR 61000-1-4:2005 (published 2006-01)
|
Electromagnetic compatibility (EMC) General - Historical rationale for the limitation of power-frequency conducted harmonic current emmissions from equipment, in the frequency range up to 2 kHz |
BS EN 60268-4:2014 (published 2014-09)
|
Sound system equipment Microphones |
BS EN 60335-1 : 2012
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
BS EN 60947-2:2017+A1:2020
|
Low-voltage switchgear and controlgear Circuit-breakers |
IEC 61000-6-3:2006+AMD1:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
UNE-EN 809:1999
|
PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
IEC 60335-2-48:2002+AMD1:2008+AMD2:2017 CSV
|
Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters |
IEC 61131-2:2017
|
Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests |
IEC 60335-2-44:2002+AMD1:2008+AMD2:2011 CSV
|
Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers |
I.S. EN 50160:2010
|
VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS |
BS EN 60335-2-91:2003
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-91: PARTICULAR REQUIREMENTS FOR WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS |
PD IEC/TR 61547-1:2017
|
EQUIPMENT FOR GENERAL LIGHTING PURPOSES - EMC IMMUNITY REQUIREMENTS - PART 1: AN OBJECTIVE LIGHT FLICKERMETER AND VOLTAGE FLUCTUATION IMMUNITY TEST METHOD |
ANSI/AAMI/IEC 60601-1-2:2014
|
MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
BS EN 62135-2:2015 (published 2015-05)
|
Resistance welding equipment Electromagnetic compatibility (EMC) requirements |
IEC 61326-1:2012 RLV
|
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
IEC 60335-2-49:2002+AMD1:2008+AMD2:2017 CSV
|
Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm |
BS EN 60335-2-12 : 2003
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
BS EN 61000-4-15:2011
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-15: TESTING AND MEASUREMENT TECHNIQUES - FLICKERMETER - FUNCTIONAL AND DESIGN SPECIFICATIONS |
BS EN 61000-2-12:2003
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-12: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC MEDIUM-VOLTAGE POWER SUPPLY SYSTEMS |
IEC 60335-2-52:2002+AMD1:2008+AMD2:2017 CSV
|
Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances |
IEC 60335-2-59:2002+AMD1:2006+AMD2:2009 CSV
|
Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers |
CSA C22.2 No. 60745.2.1 : 2004 : INC : AMD 1 : 2010 : FR
|
HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-1: PARTICULAR REQUIREMENTS FOR DRILLS AND IMPACT DRILLS |
DIN EN 12182:2012-07
|
Assistive products for persons with disability - General requirements and test methods |
BS EN 50090-2-2 : 1997
|
HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
CSA E61558.1 : 2012 : INC : UPD 1 : 2014
|
SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
CSA E60335.2.53 : 2005
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-53: PARTICULAR REQUIREMENTS FOR SAUNA HEATING APPLIANCES |
CSA C22.2 No. 60745.2.1 : 2004 : INC : AMD 1 : 2010
|
HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-1: PARTICULAR REQUIREMENTS FOR DRILLS AND IMPACT DRILLS |
CSA C22.2 No. 60745.2.21 :2005 : INC : AMD 1 : 2009 : R2014
|
HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-21: PARTICULAR REQUIREMENTS FOR DRAIN CLEANERS |
CSA IEC 61000-4-15 : 2012 : R2016
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-15: TESTING AND MEASUREMENT TECHNIQUES - FLICKERMETER - FUNCTIONAL AND DESIGN SPECIFICATIONS |
BS EN 60335-2-88:2002
|
Specification for safety of household and similar electrical appliances. Particular requirements Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems |
CSA IEC/TS 61000-3-5 :2012
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-5: LIMITS - LIMITATION OF VOLTAGE FLUCTUATIONS AND FLICKER IN LOW-VOLTAGE POWER SUPPLY SYSTEMS FOR EQUIPMENT WITH RATED CURRENT GREATER THAN 75 A |
BS EN 60519-1:2015
|
Safety in installations for electroheating and electromagnetic processing General requirements |
BS EN 50438:2013 (published 2015-06)
|
Requirements for micro-generating plants to be connected in parallel with public low-voltage distribution networks |
IEC 60335-2-62:2002+AMD1:2008 CSV
|
Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks |
IEC 60974-10:2014+AMD1:2015 CSV
|
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC)requirements |
IEC 60730-2-2:2001+AMD1:2005 CSV
|
Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors |
IEC TR 61000-3-14:2011
|
Electromagnetic compatibility (EMC) - Part 3-14: Assessment of emission limits for harmonics, interharmonics, voltage fluctuations and unbalance for the connection of disturbing installations to LV power systems |
UNE-EN 61439-1:2012
|
Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
ISO 10535:2006
|
Hoists for the transfer of disabled persons Requirements and test methods |
IEC TS 62749:2015
|
Assessment of power quality - Characteristics of electricity supplied by public networks |
IEC 61000-3-11:2017 RLV
|
Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection |
IEC 60335-2-26:2002+AMD1:2008 CSV
|
Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks |
IEC 61400-21:2008
|
Wind turbines - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines |
IEC 60335-2-28:2002+AMD1:2008 CSV
|
Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines |
BS EN 62041:2010
|
SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS |
IEC 60335-2-42:2002+AMD1:2008+AMD2:2017 CSV
|
Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens |
IEC 60335-2-64:2002+AMD1:2007+AMD2:2017 CSV
|
Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines |
IEC 60335-2-16:2002+AMD1:2008+AMD2:2011 CSV
|
Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers |
BIS IS/IEC 60730-1 : 1999(R2006)
|
AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 1: GENERAL REQUIREMENTS |
IEC 60335-2-38:2002+AMD1:2008+AMD2:2017 CSV
|
Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills |
EN 50465:2015
|
Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW |
IEC 60268-4:2014
|
Sound system equipment - Part 4: Microphones |
UNE-EN 61000-4-15:2012
|
Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications |
IEC TR 61547-1:2017
|
Equipment for general lighting purposes - EMC immunity requirements - Part 1: An objective light flickermeter and voltage fluctuation immunity test method |
IEC 62041:2017
|
Transformers, power supplies, reactors and similar products - EMC requirements |
BS EN 62282-3-1:2007
|
FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
BS EN 50491-5-1:2010
|
GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-1: EMC REQUIREMENTS, CONDITIONS AND TEST SET-UP |
BS EN 50121-5:2017
|
Railway applications. Electromagnetic compatibility Emission and immunity of fixed power supply installations and apparatus |
IEC 61439-1:2011
|
Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
IEC TR 61000-4-38:2015
|
Electromagnetic compatibility (EMC) - Part 4-38: Testing and measurement techniques - Test, verification and calibration protocol for voltage fluctuation and flicker compliance test systems |
IEC 62933-2-1:2017
|
Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification |
CISPR 61000-6-3:1996
|
Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial and light-industrial environments |