• IEC 61000-4-17:1999+AMD1:2001+AMD2:2008 CSV

    Current The latest, up-to-date edition.

    Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French

    Published date:  28-01-2009

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Defines test methods for immunity to ripple at the d.c. input power port of electrical or electronic equipment. Applies to low-voltage d.c. power ports of equipment supplied by external rectifier systems, or batteries which are being charged. This standard defines
    - test voltage waveform;
    - range of test levels;
    - test generator;
    - test set-up;
    - test procedure.
    This consolidated version consists of the first edition (1999), its amendment 1 (2001) and its amendment 2 (2008). Therefore, no need to order amendments in addition to this publication.

    General Product Information - (Show below) - (Hide below)

    Committee TC 77/SC 77A
    Development Note Stability Date: 2017. (09/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    NF EN 60255-11 : 2010 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 11: VOLTAGE DIPS, SHORT INTERRUPTIONS, VARIATIONS AND RIPPLE ON AUXILIARY POWER SUPPLY PORT
    15/30265353 DC : 0 BS EN 62271-1 ED 2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
    17/30352682 DC : 0 BS IEC 60268-4 ED6.0 - SOUND SYSTEM EQUIPMENT - PART 4: MICROPHONES
    NF EN 61000-4-1 : 2007
    BS EN 60255-26:2013 Measuring relays and protection equipment Electromagnetic compatibility requirements
    13/30281011 DC : 0 BS EN 61000-6-5 ED.1.0 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR POWER STATION AND SUBSTATION ENVIRONMENTS
    NBR IEC 61851-21 : 2013 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21: ELETRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A.C/D.C SUPPLY
    BS EN 60268-4:2014 (published 2014-09) Sound system equipment Microphones
    OIML R 139-1 : 2014 COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    BS ISO 17089-1:2010 MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 1: METERS FOR CUSTODY TRANSFER AND ALLOCATION MEASUREMENT
    BS EN 62488-2:2017 POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC (IEC 62488-2:2017)
    BS EN 60255-11 : 2010 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 11: VOLTAGE DIPS, SHORT INTERRUPTIONS, VARIATIONS AND RIPPLE ON AUXILIARY POWER SUPPLY PORT
    OIML R 117-1 : 2007 DYNAMIC MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
    I.S. EN 61000-4-1:2007 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES
    BS EN 61850-3 : 2014 COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS
    BS EN 60694 : 1997 COMMON SPECIFICATION FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
    I.S. EN 61000-6-5:2015 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT
    CEI EN 62488-2 : 1ED 2018 POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC
    07/30166308 DC : 0 BS EN 60255-11 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 11: INTERRUPTIONS TO AND ALTERNATING COMPONENT (RIPPLE) IN A.C. AND AUXILIARY ENERGIZING INPUT OF MEASURING RELAYS AND PROTECTION EQUIPMENT D.C
    BS EN 61000-6-5 : 2015 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT
    10/30240055 DC : DRAFT DEC 2010 BS EN 60255-26 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS
    BS EN 61000-4-1:2007 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES
    04/30111859 DC : 0 IEC 62271-1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR - PART 1: COMMON SPECIFICATIONS
    BS ISO 17089-1:2019 MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 1: METERS FOR CUSTODY TRANSFER AND ALLOCATION MEASUREMENT
    03/108042 DC : DRAFT MAY 2003 IEC 61000-4-1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES
    03/107918 DC : DRAFT MAY 2003 IEC 61000-4-1 ED.2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES
    OIML R 85-1 & 2 : 2008 AUTOMATIC LEVEL GAUGES FOR MEASURING THE LEVEL OF LIQUID IN STATIONARY STORAGE TANKS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROL AND TESTS
    OIML R 137-1 & 2 : 2012 AMD 2014 GAS METERS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
    OIML R 139-2 : 2014 COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES - PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
    IEC 61851-21:2001 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21: ELECTRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A.C./D.C. SUPPLY
    I.S. EN 60255-11:2010 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 11: VOLTAGE DIPS, SHORT INTERRUPTIONS, VARIATIONS AND RIPPLE ON AUXILIARY POWER SUPPLY PORT
    BS EN 60268-3:2013 SOUND SYSTEM EQUIPMENT - PART 3: AMPLIFIERS
    NF EN 60255-26 : 2014 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS
    CEI EN 61850-3 : 2014 COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS
    I.S. EN 60694:1999 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
    CAN/CSA-IEC 61000-6-5:18 Electromagnetic compatibility (EMC) — Part 6-5: Generic standards — Immunity for equipment used in power station and substation environment (Adopted IEC 61000-6-5:2015, first edition, 2015-08) | Compatibilité électromagnétique (CEM) — Partie 6-5 : Normes génériques — Immunité pour les équipements utilisés dans les environnements de centrales électriques et de postes (norme IEC 61000-6-5:2015 adoptée, première édition, 2015-08)
    EN 62488-2:2017 POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC (IEC 62488-2:2017)
    I.S. EN 60268-3:2013 SOUND SYSTEM EQUIPMENT - PART 3: AMPLIFIERS (IEC 60268-3:2013 (EQV))
    BS EN 62271-1:2017 High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear
    IEC TS 61000-6-5:2001 Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for power station and substation environments
    NBR IEC 60268-3 : 2010 ERRATA 2011 SOUND SYSTEM EQUIPMENT - PART 3: AMPLIFIERS
    NBR IEC 60694 : 2006 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
    I.S. EN 61850-3:2014 COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS
    EN 62271-1:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR (IEC 62271-1:2017)
    UNE-EN 60255-11:2010 Measuring relays and protection equipment - Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port
    OIML D 11 : 2013 GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS
    I.S. EN 60255-26:2013 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS (IEC 60255-26:2013 (EQV))
    IEC TR 61000-4-1:2016 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
    BIS IS/IEC 62271-1 : 2007 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS
    I.S. EN 62488-2:2017 POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC
    CEI EN 60268-3 : 2014 SOUND SYSTEM EQUIPMENT - PART 3: AMPLIFIERS
    ISO 17089-1:2010 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement
    I.S. EN 60268-4:2014 SOUND SYSTEM EQUIPMENT - PART 4: MICROPHONES
    I.S. EN 62271-1:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
    IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
    IEC 60268-4:2014 Sound system equipment - Part 4: Microphones
    IEEE 1143:2012 GUIDE ON SHIELDING PRACTICE FOR LOW VOLTAGE CABLES
    PD IEC/TS 63053:2017 General requirements for residual current operated protective devices for DC systems
    IEC 61000-4-1:2006 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES
    IEC TS 63053:2017 General requirements for residual current operated protective devices for DC system
    IEC 60255-26:2013 Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements
    UNE-EN 61000-6-5:2016 Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment
    IEC 61850-3:2013 Communication networks and systems for power utility automation - Part 3: General requirements
    IEC 60255-11 : 2.0 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 11: VOLTAGE DIPS, SHORT INTERRUPTIONS, VARIATIONS AND RIPPLE ON AUXILIARY POWER SUPPLY PORT
    EN 61000-6-5:2015/AC:2018-01 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT (IEC 61000-6-5:2015/COR1:2017)
    EN 60694:1996/A2:2001 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
    NF EN 60268-4 : 2014 SOUND SYSTEM EQUIPMENT - PART 4: MICROPHONES
    EN 61850-3:2014 COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS (IEC 61850-3:2013)
    EN 60268-3:2013 SOUND SYSTEM EQUIPMENT - PART 3: AMPLIFIERS (IEC 60268-3:2013)
    EN 61000-4-1:2007 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
    EN 60255-11 : 2010 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 11: VOLTAGE DIPS, SHORT INTERRUPTIONS, VARIATIONS AND RIPPLE ON AUXILIARY POWER SUPPLY PORT
    EN 60268-4:2014 SOUND SYSTEM EQUIPMENT - PART 4: MICROPHONES (IEC 60268-4:2014)
    EN 60255-26:2013/AC:2013 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS

    Standards Referencing This Book - (Show below) - (Hide below)

    AS IEC 62040.2:2019 Uninterruptible power systems (UPS) Electromagnetic compatibility (EMC) requirements
    IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
    SA TR IEC 61000.2.5:2019 Electromagnetic compatibility (EMC) Environment - Description and classification of electromagnetic environments
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective